CODE OF PRACTICE FOR METAL SCAFFOLDING SAFETY

16
CODE OF PRACTICE FOR METAL SCAFFOLDING SAFETY
4.2.3 After the subcontractor has been appointed, he is required to finalize a
detailed scaffolding plan on the basis of the outline scaffolding plan if any,
for agreement in writing. The detailed scaffolding plan should spell out the
ways and means to carry out work safely and effectively in order to fulfil
the objective of protecting workmen at work. The detailed scaffolding plan
should also be incorporated into the safety plan of the main project.
4.3 Site management and procedures
4.3.1 Managing for safe erection/alteration/dismantling
Safe working methods and practices on site should be ensured as
follows:
(a) Preparation and use of a detailed method statement
The extent of detail in a detailed method statement will depend
upon the size and/or complexity of the work, with a simple job
requiring a simple method statement and repetitive tasks being
covered by standard sheets. Preliminary method statement produced
at the planning stage should be developed into a detailed method
statement that should be incorporated into the detailed scaffolding
plan. The whole method statement should be reviewed and updated
as necessary so that it remains current. It should be distributed to all
those concerned with the supervision of scaffolding work.
(b) Thorough and active contract coordination both on and off site
Coordination and liaison between parties should be maintained
throughout the job. Any changes in previously agreed procedures
must be verified by the person responsible for coordination as
being safe before they are implemented. Matters that will contribute
to safe scaffolding work on site, including the availability of
information, plant and manpower, and the quality and supply of
materials should also be coordinated.