AC SERVO SYSTEM - SmartDrive

OEMax Servo Drive
The OEMax servo drive can help you implement the most optimal
solution that can provide flexible functions for various types of
motion control environment.
OEMax Servo Drive
▶Mid & large Class Capacity servo drive CSDP Plus
Mid & large Class Capacity servo drive
Suitable for motors with various sizes
from 1kW to 5kW
Reliable PWM control using the next
generation IPM
Adopted the high performance 32bit
DSP(TMS320VC33)
Implemented a speed measurement
system to suppress the ripple during a low
speed operation
▶Full digital servo drive CSDJ
Full digital type of AC drive using a
high speed 32 bit DSP
All-in-one type including speed,
position and torque control
Automatic measurement of load inertia
ratio
Provides the PC communication
software tool
▶Digital network servo drive CSD3
Adopted a 32 bit DSP
Uses a 17 bit encoder to improve the
accuracy in determining the position
Frequency response: 550Hz
Improved the torque accuracy to +/- 2%
Automatic detection of constants in
relation to the motor
Built-in operator is attached
▶Single Axis controller RC1
Servo controller with a built-in single axis
control system
Can support various capacities from
100W to 1kW
Provides system I/O with 9/5 points
Provides system I/O with 8/8 points
Speed response frequency: 400 Hz
On line gain tuning function
Can use a 17 bit serial encoder
PC communication software (Win98,
Win200, XP)
Separable power supply
Reliability guaranteed by the certification
from the foreign standards (CE certification)
Simple manipulation of the digital
operator
Simplified oscilloscope function
Adjustment of the D/A output scale
Provides the off/on-line auto tuning
function
Uses a PDA to implement the function of
the digital operator
Provides network solutions: SERCOS
Supports the SERCOS network
Optical communication data transmission
rate: 4.8Mbits/sec
Supports the auto-tuning function
Provides the RC1 software tool
Repetition accuracy +/- 1 pulse
Can save up to 255 sets of position data
OEMax Servo Drive I 5