Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
558.<br />
Group of Lathe Accessories, including six drawer bars, four D and<br />
two WW; six tool rests; seven tailstocks including two marked Levin;<br />
three V blocks marked Levin; nine cross slides including an American<br />
Watch Tool Co., three marked Levin, and one Marshall; two index<br />
plates, one 51-366, other 52-365.<br />
$200-300<br />
559.<br />
Gilman Lathe and Assortment of Unrelated Accessories, lathe with<br />
an 18-in. bed, two tailstocks, pulley transmission and miscellaneous<br />
lathe and milling accessories.<br />
$200-300<br />
560.<br />
Derbyshire Micromill, Waltham, Massachusetts, cast iron chip tray<br />
with elements of lubricant system, multi-directional milling table, cutter<br />
arbor, approximately forty indexing plates, approximately thirty WW<br />
collets and 1/4 hp, 115 volt AC motor, lg. 16, wd. 12, ht. 16 in.<br />
Note: Formerly the property of the U.S. Navy.<br />
$200-400<br />
561.<br />
G. Boley Watchmaker’s Lathe, Germany, including an 11-in. bed,<br />
headstock, cross slide and associated tool rest, tailstock, three-<br />
and four-jaw chucks, all on an aluminum base, 115 volt motor with<br />
forward and reverse switch and a foot speed control, together with<br />
approximately thirty-five WW collets.<br />
$200-300<br />
164 additional information and photos at www.skinnerinc.com<br />
567<br />
562.<br />
Two Model Maker’s Lathes, including a 10-in. Small Machines Inc.<br />
lathe with motor and foot speed control, headstock, tailstock, flip tool<br />
rest and cross slide, the other a 12-in. Rivett lathe with headstock,<br />
tailstock, flip tool rest, and a box of approximately twenty-five WW<br />
collets, and an Emesco cable driven dental drill for use as a rotary<br />
grinding tool.<br />
$150-250<br />
563.<br />
Nickel Finish Watchmaker’s Lathe, headstock end stamped Moseley,<br />
Made in U.S.A, tailstock end stamped C. & E. Marshall Co., 12-in. bed,<br />
headstock, two different tailstocks, all mounted on an aluminum stand<br />
with an electric motor, a foot speed control, and approximately fifty WW<br />
collets.<br />
$100-150<br />
564.<br />
Steinel Grinding and Polishing Machine, with a concave iron tray,<br />
9 1/2-in. bed, lever-operated tailstock with quick release collet, and<br />
pivoted grinding/polishing head.<br />
$150-250<br />
565.<br />
Collection of Metal Working Cutters and Bits, including wheel and<br />
pinion cutters, slitting saws, reamers, drill bits, and cutter bits.<br />
$100-150