AFSC 2W1X1 AIRCRAFT ARMAMENT SYSTEMS ... - Air Force Link

DEPARTMENT OF THE AIR FORCE CFETP 2W1X1 

Headquarters US Air Force Parts I and II 

Washington, DC 20330-1030 1 January 2012 

AFSC 2W1X1 

AIRCRAFT ARMAMENT SYSTEMS 

Basic Senior Master 

CAREER FIELD EDUCATION AND TRAINING PLAN 

ACCESSIBILITY: Publications and forms are available on the e-publishing website at: 

www.e-publishing.af.mil for downloading or ordering. 

RELEASABILITY: There are no releasability restrictions on this publication.

PART I 

TABLE OF CONTENTS 

Preface ______________________________________________________________________1 

Abbreviations/Terms Explained __________________________________________________2 

Section A, General Information ___________________________________________________4 

Purpose 

Use 

Coordination and Approval 

Section B, Career Progression and Information ______________________________________5 

Specialty Description 

Skill/Career Progression 

Training Decisions 

Community College of the Air Force 

Career Field Path 

Section C, Skill Level Proficiency Requirements ____________________________________13 

Purpose 

Training Requirements 

Section D, Resource Constraints _________________________________________________15 

Section E, Transitional Training Guide ____________________________________________16 

PART II 

Section A, Specialty Training Standard ____________________________________________16 

Section B, Support Materials ____________________________________________________18 

Section C, Training Course Index ________________________________________________18 

Section D, MAJCOM Unique Requirements ________________________________________18 

Section E, Course Objective List _________________________________________________21 

OPR: 363 TRS/TRR (Ms. Beverly Fisher) 

Certified by: HQ USAF/A4LW (CMSgt Michael D. Lucchesi) 

Supersedes: CFETP 2W1X1, 1 March 2010; CFETP 2W1X1 Change 1, 15 March 2011 

Pages: 21 

i

Part I 

Preface 

AIRCRAFT ARMAMENT SYSTEMS SPECIALTY 


CAREER FIELD EDUCATION AND TRAINING PLAN 

1. A highly trained, motivated enlisted work force is the Air Force’s key resource in meeting 

challenges of the future. If the Air Force is to meet present and future challenges, it is essential 

the work force be effectively and efficiently trained to perform duties within each skill level of 

the Air Force Specialty (AFS). The Career Field Education and Training Plan (CFETP) for the 

Aircraft Armament Systems Specialty is a comprehensive education and training document that 

identifies life cycle education and training requirements, training support resources, and 

minimum core task requirements for this specialty. The CFETP will provide personnel a clear 

career path to success and will install rigor in all aspects of career field training. Note: Civilians 

occupying associated positions will use Part II to support duty position qualification training. 

2. The CFETP consists of two parts; supervisors plan, manage, and control training within the 

2W1X1 specialty using both parts of the plan. 

2.1. Part I provides information necessary for overall management of the specialty. Section A 

explains how everyone will use the plan. Section B identifies career field progression 

information, duties and responsibilities, training strategies, and career field path. Section C 

associates each level with specialty qualifications (knowledge, education, training, and other). 

Section D indicates resource constraints. Some examples are funds, manpower, equipment, and 

facilities. Section E identifies transitional training guide requirements for SSgt through MSgt. 

2.2. Part II includes information for supervisors and trainers use to identify, plan, and conduct 

training commensurate with the overall goals of this plan. Section A identifies the Specialty 

Training Standard (STS) and includes duties, tasks, TRs to support training, AETC conducted 

training, wartime course and core task and correspondence course requirements. Section B 

contains the Course Objective List (COL) and training standards supervisors will use to 

determine if airmen satisfied training requirements. Section C identifies available support 

materials. An example is a Qualification Training Package (QTP) which may be developed to 

support proficiency training. Section D identifies a training course index supervisors can use to 

determine resources available to support training. Included here are both mandatory and optional 

courses. Section E identifies MAJCOM unique training requirements supervisors can use to 

determine additional training required for the associated qualification needs. At unit level, 

supervisors and trainers will use Part II to identify plan, and conduct training commensurate with 

the overall goals of this plan. 

3. Using guidance provided in the CFETP will ensure individuals in the Aircraft Armament 

Systems specialty receive effective and efficient training at the appropriate points in their career. 

This plan will enable us to train today’s work force for tomorrow’s jobs. 

1

ABBREVIATIONS/TERMS EXPLAINED 

Advanced Training (AT). Formal specialty training used for selected airmen. Formal course 

which provides individuals who are qualified in one or more positions of their Air Force 

Specialty (AFS) with additional skills/knowledge to enhance their expertise in the career field. 

Air Force Job Qualification Standard / Command Job Qualification Standard 

(AFJQS/CJQS). A comprehensive task list, which describes a particular job type or duty 

position. They are used by supervisors to document task qualifications. The tasks on AFJQS/ 

CJQS are common to all persons serving in the described duty position. 

Career Field Education and Training Plan (CFETP). A comprehensive, multipurpose 

document encapsulating the entire spectrum of education and training requirements for a career 

field. It outlines a logical growth plan that includes training resources and is designed to make 

career field training identifiable, to eliminate duplication, and to ensure the training is budget 

defensible. 

Continuation Training. Additional training exceeding requirements with emphasis on present 

or future duty assignments. 

Core Task. A task Air Force career field managers (AFCFMs) identify as a minimum 

qualification requirement within an Air Force specialty. 

Course Training Standard (CTS). An AETC document that identifies training tasks and 

associated proficiency levels for a specific course. It serves as a contract between AETC and its 

customers to show enlisted supplemental or officer training requirements. 

Critical Task. Task(s) identified by the AFCFM, MAJCOM functional manager, and/or 

Weapons/Armament Flight Superintendent as essential to holding the skill-level for the current 

duty position. 

Duty Position. When used in this CFETP refers to the work center currently assigned (i.e.: 

weapons section, weapons standardization, armament shop, etc.) 

Enlisted Specialty Training (EST). A mix of formal training (technical school) and informal 

training (on-the-job) to qualify and upgrade airmen in each skill level of a specialty. 

Exportable Training. Additional training via computer assisted, paper text, interactive video, 

or other necessary means to supplement training. 

Field Technical Training (Type 4). Special or regular on-site training conducted by a field 

training detachment (FTD) or by a mobile training team. 

Initial Skills Training (Type 3). AFS specific training an individual receives upon entry into 

the Air Force or upon retraining into this specialty for award of the 3-skill level. Normally, this 

training is conducted by AETC at one of the technical training centers. 

Instructional System Development (ISD). A deliberate and orderly but flexible process for 

planning, developing, implementing, and managing instructional systems. It ensures personnel 

2

are taught in a cost efficient way the knowledge, skills, and attitudes essential for successful job 

performance. 

Master Task Listing (MTL). A comprehensive list of all tasks performed within a work center 

and consisting of the current CFETP or AFJQS and locally developed AF Forms 797 (as a 

minimum). Should include tasks required for deployment and/or UTC requirements. 

Master Training Plan (MTP). Employs a strategy for ensuring the completion of all work 

center job requirements by using a Master Task Listing and provides milestones for task, CDC 

completion, and prioritizes deployment/UTC, home station training tasks, upgrade, and 

qualification tasks. 

Occupational Analysis Report (OAR). A detailed report showing the results of an 

occupational survey of tasks performed within a particular AFS. 

On-the-Job Training (OJT). Hands-on, over-the-shoulder training conducted to certify 

personnel in both upgrade (skill level award) and job qualification (duty position certification) 

training. 

Proficiency Code Key. The proficiency code key shows the level of training and knowledge 

provided by resident training and career development courses. 

Proficiency Training. Proficiency training is additional training, either in-residence or 

exportable advanced training courses, or on-the-job training, provided to personnel to increase 

their skills and knowledge beyond the minimum required for upgrade. 

Qualification Training (QT). Actual hands-on task performance training designed to qualify an 

airman in a specific duty position. This training program occurs both during and after the 

upgrade training process. It is designed to provide the performance skills/knowledge required to 

do the job. 

Qualification Training Package (QTP). An instructional package designed for use at the unit 

to qualify, or aid qualification, in a duty position or program, or on a piece of equipment. It may 

be printed, computer-based, or in other audiovisual media. 

Resource Constraints. Resource deficiencies, such as money, facilities, time, manpower, and 

equipment that preclude desired training from being delivered. 

Specialty Training Package and COMSEC Qualification Training Package. A composite of 

lesson plans, test material, instructions, policy, doctrine, and procedures necessary to conduct 

training. These packages are prepared by AETC, approved by National Security Agency (NSA), 

and administered by qualified communications security (COMSEC) maintenance personnel. 

Specialty Training Standard (STS). An Air Force publication that describes an AFS in terms 

of tasks and knowledge that an airman may be expected to perform or to know on the job. It 

further serves as a contract between the Air Education and Training Command (AETC) and the 

user to show the overall training requirements for an Air Force specialty code that the formal 

schools teach. 

3

Total Force. All collective Air Force components (active, reserve, guard, and civilian elements) 

of the United States Air Force. 

Training Business Area (TBA). A web-based application providing real-time visibility of 

technical qualifications, certifications, and training status. It duplicates or replaces the 

functionality of the STS. 

Training Planning Team (TPT). Comprised of the same personnel as a U&TW, however TPTs 

are more intimately involved in training development and the range of issues are greater than is 

normal in the U&TW forum. 

Upgrade Training (UGT). Mandatory training that leads to attainment of higher level of 

proficiency and award of the 3-, 5-, 7-, 9-skill levels. 

Utilization and Training Workshop (U&TW). A forum of MAJCOM Air Force Specialty 

Code (AFSC) functional managers, Subject Matter Experts (SMEs), Career Field Manager and 

AETC training personnel that determines career ladder training requirements for a designated 

AFSC. 

Wartime Tasks. The minimum tasks that will be taught in technical training in residence during 

a wartime contingency. These apply only to in-residence 3-skill level courses taught. 

Section A - General Information 

1. Purpose. This CFETP provides the information necessary for Air Force Career Field 

Managers (AFCFM), MAJCOM functional managers (MFMs), commanders, training managers, 

supervisors and trainers to plan, develop, manage, and conduct an effective and efficient career 

field training program. The plan outlines the training that individuals in this AFS should 

receive in order to develop and progress throughout their career. This plan identifies initial 

skills, upgrade, qualification, advanced and proficiency training. Initial skills training is the 

AFS specific training an individual receives upon entry into the AF or upon retraining into this 

specialty for award of the 3-skill level. Normally, this training is conducted by AETC at one of 

the technical training centers. Upgrade training identifies the mandatory courses, task 

qualification requirements, and correspondence course completion requirements for award of 

the 3-, 5-, 7-, 9-skill level. Qualification training is actual hands-on task performance training 

designed to qualify an Airman in a specific duty position. This training program occurs both 

during and after the upgrade training process. It is designed to provide the performance skills 

and knowledge required to do the job. Advanced training is formal specialty training used for 

selected airmen. Proficiency training is additional training, either in-residence or exportable 

advanced training courses, or on-the-job training provided to personnel to increase their skills 

and knowledge beyond the minimum required for upgrade. The CFETP has several purposes— 

some are: 

1.1. Serves as a management tool to plan, manage, conduct, and evaluate a career field training 

program. Also, it is used to help supervisors identify training at the appropriate point in an 

individual’s career. 

4

1.2. Identifies task and knowledge training requirements for each skill level in the specialty and 

recommends education/training throughout each phase of an individual’s career. 

1.3. Lists training courses available in the specialty, identifies sources of training, and the 

training delivery method. 

1.4. Identifies major resource constraints, which impact full implementation of the desired 

career field training process. 

2. Uses. The plan will be used by MFMs and supervisors at all levels to ensure comprehensive 

and cohesive training programs are available for each individual in the specialty. 

2.1. AETC training personnel will develop/revise formal resident, non-resident, field and 

exportable training based on requirements established by the users and documented in Part II of 

the CFETP. They will also work with the AFCFM and MFMs to develop acquisition strategies 

for obtaining resources needed to provide the identified training. 

2.2. MFMs will ensure their training programs complement the CFETP mandatory initial, 

upgrade, and proficiency requirements. OJT, resident training, contract training, or exportable 

courses can satisfy identified requirements. 

2.3. Each individual will complete the mandatory training requirements specified in this plan. 

The list of courses in Part II will be used as a reference to support training. 

3. Coordination and Approval. The AFCFM is the approving official and waiver authority for 

any changes to, and deviations from, this CFETP. The AFCFM will initiate an annual review of 

this document to ensure currency and accuracy. MAJCOM representatives and AETC training 

personnel will identify and coordinate on the career field training requirements. Using the list of 

courses in Part II, they will eliminate duplicate training. 

Section B - Career Progression and Information 

4. Specialty Description. 

4.1. Specialty Summary. Refer to the 2W1X1X AFSC specialty description in the Air Force 

Enlisted Classification Directory (AFECD), part I available online at the Air Force Personnel 

Services website (https://gum-crm.csd.disa.mil/app/login). 

4.2. Duties and Responsibilities. Refer to AFSC specialty description (above) for the full listing 

of duties and responsibilities. Loads and unloads nuclear and nonnuclear munitions, explosives, 

and propellant devices on aircraft. Manages, controls, maintains, and installs aircraft bomb, 

rocket, and missile release, launch, suspension, and monitor systems; guns and gun mounts; and 

related munitions handling, loading, and test equipment. Related DoD Occupational Subgroup: 

164600. 

4.2.1. Loads, unloads, and positions munitions on aircraft. Loads, positions, performs safing 

operations, and unloads munitions. Uses handling, loading, and checkout procedures and 

equipment. Tests suspension, launch, and release systems for retentive locking, and manual or 

5

electrical release. Analyzes malfunctions. Performs functional checks of launch and suspension 

systems. Prepares munitions and inspects post loading weapons. Operates handling and loading 

equipment, and mates munitions with aircraft release, launch, and suspension systems. Loads 

and services aircraft gun systems. Tests electrical and electronic circuitry for continuity, voltage, 

and proper operation. Tests for unwanted electrical signal or power before connecting 

electrically actuated explosives and propellants. Installs ground safety devices on munition and 

gun system components to prevent inadvertent detonation, launching, or firing. Inserts and 

removes impulse cartridges associated with fuel tanks and pylons. Adjusts and installs fuses, 

boosters, and delay elements in conventional munitions. 

4.2.2. Inspects, repairs, and maintains aircraft release, launch, suspension, and monitor systems; 

aircraft guns; and related equipment. Operates, inspects, and performs operator maintenance on 

related munitions handling, loading, and test equipment. Examines for visual defects and proper 

installation of systems components such as munitions ejector racks, loading and suspension 

devices, shackles, rocket pods, pylons, aircraft ammunition, boosters, and feed chutes. Boresights 

and performs after-firing inspection of aircraft guns. Examines aircraft guns for defects. 

Analyzes malfunctions of munitions launch, release, suspension, and monitor systems, and 

associated handling and loading equipment. Disassembles, repairs, or replaces mechanical, 

electrical, electronic, and pneudraulic mechanisms of launch and release systems, and aircraft 

gun systems. Removes, disassembles, and inspects parts and subassemblies for damage, rust, 

corrosion, or acceptable clearances and tolerances. Makes adjustments and applies lubricants 

and preservatives. Performs serviceability tests on aircraft guns, gun systems, and munitions 

associated suspension equipment. 

4.2.3. Performs armament systems maintenance functions. Modifies munitions launch, release, 

suspension, and monitor systems to improve efficiency. Determines probable effect of 

modifications on future maintenance and operational problems. 

4.2.4. Plans, organizes, and directs aircraft armament systems maintenance activities. 

Establishes and evaluates performance and training standards, maintenance controls, and 

procedures. Checks methods and techniques used to load and unload munitions on aircraft, to 

repair and maintain aircraft release and gun systems, and to maintain, repair, and modify 

associated equipment. Ensures compliance with policies, directives, and safety procedures. 

Analyzes productivity and work quality. Evaluates operational efficiency of aircraft guns and 

munitions systems, and recommends modification. 

5. Skill and Career Progression. Adequate training and timely progression from the 

apprentice to the superintendent skill level play an important role in the Air Force’s ability to 

accomplish its mission. It is essential that everyone involved in training must do their part to 

plan, manage, and conduct an effective training program. The guidance provided in this part of 

the CFETP will ensure each individual receives viable training at appropriate points in their 

career. 

5.1. Apprentice (3) Level. Individuals must successfully complete one of the following initial 

skills training courses to be awarded the 3-skill level: J3ABR2W131C000 (A-10), 

J3ABR2W131E025 (F-15), J3ABR2W131F026 (F-16), J3ABR2W131J028 (F-35), 

J3ABR2W131K003 (B-52), J3ABR2W131L001 (B-1), J3ABR2W131N027 (F-22), 

J3ABR2W131Q051 (RPA), or J3ABR2W131Z048 (Special Missions). 

6

5.2. Journeyman (5) Level. In order to be awarded the 5-skill level in the Aircraft Armament 

Systems specialty individuals must successfully complete the 2W151A and 2W151B CDCs, all 

duty position tasks identified in the Master Task Listing (MTL), and all applicable 5-skill level 

core tasks identified by an ―5B‖ or ―5F‖ in the Core Indicator column of TBA. After award of 

the 5-skill level, available continuation training should be used based on an individual’s 

particular duty position or other needs. A listing of continuation training is included but not 

limited to training listed in Part II, Section D, of this CFETP. 

5.3. Craftsman (7) Level. In order to be awarded the 7-skill level in the Aircraft Armament 

Systems specialty, individuals must successfully complete the 7-skill level awarding course 

(J3ACR2W171 048). Prior to attending the course, the upgrade trainee must successfully 

complete CDC 2W171, all duty position tasks identified in the MTL, and all 7-skill level core 

tasks identified by a 7 in the Core indicator column of TBA. After award of the 7-level, 

available continuation training should be used based on an individual’s particular training needs. 

A listing of continuation training is included but not limited to that training listed in Part II, 

Section D, of this CFETP. 

5.4. Superintendent (9) Level. In order to be awarded the 9-skill level in the Armament 

Systems specialty, individuals must be in the grade of SMSgt and have successfully completed 

the 9-skill level awarding course, J3AZR2W191 0A1 (effective 1 Mar 2013). (Not mandatory for 

AFRC.) Continuation training, if available, should be used as needed based on an individual’s 

particular needs. 

6. Training Decisions. The CFETP uses a building block approach (simple to complex) to 

encompass the entire spectrum of training requirements for the Aircraft Armament Systems 

career field. The spectrum includes a strategy for when, where, and how to meet the training 

requirements. The strategy must be apparent and affordable to reduce duplication of training and 

eliminate a disjointed approach to training. The following key training decisions were made at 

the 2W1X1 Utilization and Training Workshop (U&TW) held at Sheppard AFB, TX, 23-27 May 

2011. 

6.1. Initial Skills. The Fundamentals course added training on CAS description and 

Maintenance Concepts; increased training on Progression in Career Field and TO Improvement; 

deleted Live Fire and Metric Notation; and swapped Corrosion Control training from Procedures 

to Identification. The A-10 course added training on the Detent Tester, the LAU-105 Detent 

Test, and load/unload GBU-54; and swapped training from the CBU-87 to the CBU-103. The F- 

15 course added training on the GBU-54; deleted training on the AGM-130 and GBU-15; 

swapped training from the pylon adapter to the UPLA; and deleted BRU-61 backshop training. 

The F-16 course added training on the BRU-61 R/I plus bench check, CMBRE, load/unload 

AGM-88 and GBU-10, knowledge on GBU-12 and GBU-54; and deleted training on the AGM- 

158 and GBU-24. The B-1 course added GBU-54 knowledge (and remove and install panels if 

the trainer is modified to support); increased training on CRL; and decreased training on RAM 

and four Weapons Bay tasks. The B-2/B-52 course had no changes. The F-22 course added 

training on open/close canopy, LRU remove/install, operate gun purge door; and swapped 

training from gun system to pylon functional check. The Special Missions course will split with 

C-130, HH-60, and CV-22 remaining under the Z shred with training on the applicable AGE and 

Gun tasks. A new course for RPAs will stand up with no change to MQ-1 training brought from 

the Z shred but all new training for the MQ-9. 

7

6.2. Five-Level Upgrade Requirements. Airframe specific 5-level core tasks were developed 

with a standard of load/unload and configure aircraft for flightline personnel; one launcher and 

one rack for backshop personnel. There were 134 5-level core tasks added (3 general, 60 

flightline, and 61 backshop). Additional training on Defense Logistics Agency (DLA) will be 

added to 2.14.1.1. Supply Discipline and Total Force Integration (TFI) will be added to 2.3 

Relationship to AF Commands and Missions. There were no new tasks nor changes to 

proficiency levels for the 5-level CDCs. 

6.3. Seven-Level Upgrade Requirements. There were 5 new 7-level core tasks added: 

Handling of Explosive Loaded Aircraft, Use CAS, Maintain Training Records, Review MIS 

Automated Histories, and Use AF Form 2430. The 7-level CDCs added training on Total Force 

Integration (TFI) against 2.3 Relationship to AF Commands and Missions. The 7-level resident 

course will modify training on IMDS. 

6.4. Nine-Level Upgrade Requirements. There were no changes to the 9-level course. 

6.5. Proficiency Training. No changes were made to FTD proficiency training. 

6.6. In-Resident Training Notes: 

6.6.1. A munitions matrix will be maintained with the CFETP within TBA to annotate munition 

applicability for resident course training. 

6.6.2. Students assigned to B-2 units will attend the B-52 (J3ABR2W131K003) course due to 

the small number of students requiring this training. 

6.6.3. When training the LAU-128 (F-15) and the LAU-129 (F-16), the schoolhouse will cover 

knowledge on recycling the forward dampeners. 

6.6.4. F-16 resident training requires Stores Management System (SMS) loading and clearing 

and system operational/functional checks to be conducted on a Block 40 or later aircraft. 

6.6.5. Remotely Piloted Aircraft (RPA) resident training (J3ABR2W131Q051) will cover 

training specified in the STS for MQ-1 and MQ-9. 

6.6.6. Special Missions resident training (J3ABR2W131Z048) will cover training specified in 

the STS for AC-130H, AC-130U, HH-60, and CV-22. 

7. Community College of the Air Force. Enrollment in CCAF occurs upon completion of 

Basic Military Training (BMT). CCAF provides the opportunity to obtain an Associate of 

Applied Sciences Degree. In addition to its associate’s degree program, CCAF offers the 

following: 

7.1. Professional Certification. CCAF offers multiple professional certifications based on 

specific education, experience and qualification requirements. Two certifications are listed 

below. For additional information on these and other certifications see the CCAF web site 

(http://www.au.af.mil/au/ccaf/certifications.asp). 

8

7.1.1 CCAF Instructor Certification (CIC). The CIC program replaced the Occupational 

Instructor Certification (OIC) on 1 January 2011. The purpose of the CIC is to recognize the 

instructor's extensive faculty development training, education and qualification required to teach 

a CCAF course and formally acknowledges the instructor's practical teaching experience. 

7.1.2. Professional Manager Certification (PMC): CCAF offers the PMC for qualified senior 

Air Force enlisted personnel who have demonstrated an advanced level of professional 

accomplishment. The purpose of the certification is to recognize the individual’s outstanding 

education and training required to lead and manage Air Force personnel and critical national 

defense assets. 

7.3. Trade Skill Certification. When a CCAF student separates or retires, a trade skill 

certification is awarded for the primary occupational specialty. This certification translates the 

member’s last PAFSC skill-level into terms understood by prospective employers (i.e.: 

Apprentice, Journeyman, Craftsman / Supervisor, and Master Craftsman / Manager.) All are 

transcribed on the CCAF transcript. 

7.4. Degree Requirements. All airmen are automatically entered into the CCAF program. Prior 

to completing an associate degree, the 5 skill-level must be awarded and the following 

requirements must be met: 

Semester Hours 

Technical Education........................................................................................................ 24 

Leadership, Management, and Military Studies (LMMS) ............................................. 6 

Physical Education ......................................................................................................... 4 

General Education .......................................................................................................... 15 

Oral Communication, Written Communication, Mathematics, Social 

Science, and Humanities 

Program Elective ............................................................................................................ 15 

Technical Education; LMMS; or General Education 

Total ................................................................................................................................ 64 

7.3.1. Technical Education (24 Semester Hours): Twenty-four semester hours are required to 

fulfill the technical education requirement. Twelve semester hours must be applied from the 

technical core area with the remaining 12 applied from either the technical core or the technical 

elective areas. Completion of the initial skills resident training satisfies all or part of the technical 

education requirement. 

7.3.2. Leadership, Management, and Military Studies (LMMS) (6 Semester Hours): 

Professional military education and/or civilian management courses may be used to fill this 

requirement. The preferred method of completing LMMS is through attending Airman 

Leadership School (ALS), the Non-Commissioned Officer (NCO) academy and/or the Air Force 

Senior NCO Academy. 

7.3.3. Physical Education (4 Semester Hours): Completing basic military training satisfies the 

4-semester-hour physical education requirement. 

7.3.4. General Education (15 Semester Hours): The general education requirement is satisfied 

by applying courses accepted in transfer or by testing credit. The CCAF General Education 

9

Mobile (GEM) program will assist individuals pursuing general education requirements in a 

distance learning format. 

7.3.5. Program Elective (15 Semester Hours): Courses applicable to the Technical Education; 

Leadership, Management, and Military Studies; or General Education may be used to satisfy 

program elective hours. 

7.4 Baccalaureate Degree. The Air University Associate-to-Baccalaureate Cooperative links 

Airmen who have completed an associate degree to a collection of accredited "military friendly" 

colleges and universities to consider when completing a four-year degree. The program 

maximizes the application of military career education and training, and provides a multitude of 

online academic and support services for the enlisted member through the Air Force Virtual 

Education Center. 

7.5. Off-Duty Education. Additional off-duty education is a personal choice that is highly 

encouraged for all. Individuals desiring to become an Air Force instructor should be actively 

pursuing an associate’s degree. A degreed faculty is necessary to maintain accreditation through 

the Southern Association of Colleges and Schools. 

8. Career Field Path. 

8.1. Location/Skill level Table. Table 8.1 listed below provides a list of possible assignments. 

The assignments are subject to change without notice. Members interested in assignments 

should consult the Equals and Equals Plus listings for more detailed information. 

Table 8.1 

LOCATION 3 Level 5 Level 5 Level 7 Level 7 Level 9 Level 

(AB-A1C) (SrA) (SSgt) (TSgt) (MSgt) (SMSgt) 

ANDERSEN, GUAM K X X X X X 

AVIANO, ITALY F X X X X X 

BARKSDALE, LOUISIANA K X X X X X 

BOLLING, MARYLAND X 

BUCHEL, GERMANY X X X X 

CANNON, NEW MEXICO Q, Z X X X X X 

CREECH, NEVADA Q X X X X X 

DAEGU AB, SOUTH KOREA X 

DAVIS-MONTHAN, ARIZONA C, Z X X X X X 

DYESS, TEXAS L X X X X X 

EDWARDS, CALIFORNIA F X X X X X 

EGLIN, FLORIDA C, E, F, J X X X X X 

EIELSON, ALASKA F X X X X 

ELLSWORTH, SOUTH DAKOTA L X X X X X 

ELMENDORF, ALASKA N X X X X X 

GHEDI, ITALY X X X X 

HILL, UTAH F X X X X X 

HOLLOMAN, NEW MEXICO N, Z X X X X X 

HURLBURT FIELD, FLORIDA Z X X X X X 

JB PRL HBR-HICKAM, HAWAII N X X X X 

KADENA, JAPAN E, Z X X X X X 

KIRTLAND, NEW MEXICO Z X X X X X 

KLEINE BROGEL, BELGIUM X X X X 

KUNSAN, SOUTH KOREA F X X X X X 

LAKENHEATH, UNITED KINGDOM E, Z X X X X X 

10

LOCATION 3 Level 5 Level 5 Level 7 Level 7 Level 9 Level 

(AB-A1C) (SrA) (SSgt) (TSgt) (MSgt) (SMSgt) 

LANGLEY, VIRGINIA N X X X X X 

LUKE, ARIZONA F X X X X X 

MCENTIRE, SOUTH CAROLINA F X X X X 

MINOT, NORTH DAKOTA K X X X X X 

MISAWA, JAPAN F X X X X X 

MOODY, GEORGIA C, Z X X X X X 

MOUNTAIN HOME, IDAHO E X X X X X 

NELLIS, NEVADA C, E, F, J, N, Z X X X X X 

OSAN, SOUTH KOREA C, F X X X X X 

RAMSTEIN, GERMANY X X X X X 

RANDOLPH, TEXAS X 

ROBINS, GEORGIA X X 

SEYMOUR JOHNSON, N. CAROLINA E X X X X X 

SHAW, SOUTH CAROLINA F X X X X X 

SHEPPARD, TEXAS X X X X 

SPANGDAHLEM, GERMANY C, F X X X X X 

TYNDALL, FLORIDA N X X X X X 

VOLKEL, NETHERLANDS X X X X 

WHITEMAN, MISSOURI K X X X X X 

WRIGHT PATTERSON, OHIO X 

8.2. Enlisted Career Path. Table 8.2 listed below provides information on the 2W1X1 enlisted 

career path. 

Table 8.2 

2W1X1 Aircraft Armament Systems 

Apprentice Journeyman Craftsman Superintendent CEM 

Rank AB, Amn, A1C SrA SSgt Tsgt MSgt SMSgt CMSgt 

High Year of 

Tenure (HYT) 10 years 20 years 22 years 24 years 26 years 30 years 

Earliest 

Sew-On 28 months 3 years 5 years 8 years 11 years 14 years 

2W1XX 

Average 

Sew-On 

Badges 

AFI 36-2903 

6 months 

16 months 

PME Airman 

Leadership 

School 

- SSgt select or 

SrA with 48mo 

TIS 

- required to sew 

on SSgt (Active 

Duty only) 

3 years 4.5 years 12.5 years 17 years 20 years 22 years 

11 

NCO Academy 

- TSgt or select 

- Required to 

sew on MSgt 

(active duty 

only) 

Senior NCO Academy 

- MSgt or SMSgt 

- Required to sew on CMSgt 

(Active duty only) 

- Joint SNCO PME 

CMSgt 

Leadership 

Course

2W1X1 Aircraft Armament Systems 

Apprentice Journeyman Craftsman Superintendent CEM 

Rank AB, Amn, A1C SrA SSgt Tsgt MSgt SMSgt CMSgt 

Upgrade 

Training 

Professional 

Development 

(Note 1) 

Career Ladder 

(Note 2) 

3-level 

- Awarded upon 

graduation from 

Initials Skills 

Course 

FTAC 

5-level 

- 12 months UGT 

(retrainee – 9 mo) 

- Complete CDC 

- Complete Core 

Tasks 

-PME 

-PME 

- Train the - NCOPE 

trainer 

- CCAF 

- CMSAF Reading - Train the 

List 

trainer 

-Instructor 

Certification 

- CMSAF 

Reading list 

- Enlisted-to- 

AFIT 

- Load Crew - Supervisor 

member (mbr) - Load Crew mbr 

- Armament Team - Armament 

mbr 

(i.e.CAST) team 

mbr 

- LSC mbr 

- Lead crew mbr 

- Tech Training 

Instructor 

7-level 

- Min rank of SSgt 

- 12 mos OJT (retrainee – 6 mo) 

- Complete CDC 

- Complete Core Tasks 

- Complete Craftsman Course 

- Load Crew 

Chief 

- Armament 

(i.e. CAST) TC 

- LSC member 

- Lead Crew 

Chief 

- Tech Training 

Instructor 

12 

- PME 

- NCOPE 

- CMSAF 

Reading list 


AFIT 

- NCOIC 

Loading 

- NCOIC 

Maintenance 

- Weapons 

Expeditor 

- Load Crew 

Chief 

-Armament 

(i.e.CAST) TC 

- Armament 

Maintenance 

Section NCOIC, 

AME Section 

NCOIC or 

Support Section 

NCOIC 

- LSC TC 

- Lead Crew TC 

- Quality 

Assurance 

- Tech training 

Instructor 

- Academic 

Instructor 

7-level 

- PME 

SNCO 

Induction 

Course 

- SNCOPE 

- CMSAF 

Reading list 


AFIT 

- Wpns Section 

Chief 

- Armt. Supt. 

- NCOIC 

Loading 

- NCOIC 

Maintenance 

- Armament Sys. 

NCOIC 

- MAJCOM 

Armament Sys. 

Manager 

- Quality 

Assurance 

- CDC writer 

9-level 

-Complete 

Advance 

Armament 

Course 

- PME 

- Professional 

Manager 

Certification 

- CMSAF 

Reading list 

- Wpns Section 

Chief 

- Armt Supt. 

- WSS 

- MFM 

- PME 

- Professional 

Manager 

Certification 

- CMSAF 

Reading list 

- WWM 

- MFM 

- CFM 

Notes: 

1. This should be used as a guide for Professional Development to expand knowledge and increase functional skills. 

2. This should be used as a guide for Career Progression; this is not a complete list, but a guide to provide supervisors, 

and members an idea to what positions they should be striving for to gain experience as they progress through the grade 

and skill level. 

8.3 My Enlisted Development Plan (MyEDP). All personnel are encouraged to establish a 

personal development plan through the Air Force Portal. This account can be established by 

selecting the Life & Career option from the Home page and following the prompts under My 

Enlisted Development Plan (https://www.my.af.mil/afpc2w20/myxdp). MyEDP is designed to 

be your "roadmap" to aid in your continued professional development. It is a useful tool in 

preparing individuals for the challenges that all airmen encounter. The EDP is broken down into 

three modules: Education, Training and Experience which provide information to enhance your 

understanding. By no means does EDP guarantee success; it is only a suggested path based on 

previous experiences of fellow enlisted members. Career field information and news will be 

placed in MyEDP under the career information tab.

Section C - Skill Level Proficiency Requirements 

9. Purpose. Skill level training requirements in this specialty are defined in terms of tasks and 

knowledge requirements. This section outlines the specialty qualification requirements for each 

skill level in broad, general terms and establishes the mandatory requirements for entry, award 

and retention of each skill level. The specific task and knowledge training requirements are 

identified in the STS at Part II, Section A of this CFETP. 

10. Specialty Qualification: 

10.1. Apprentice Level Training: 

10.1.1. Specialty Qualification. This information will be located in the official specialty 

description in AFECD, paragraph 3. 

10.1.1.1. Knowledge. Knowledge is mandatory of: electricity; principles of physics, mechanics, 

electronics, and ballistics applying to munitions launch, release, suspension, fusing, and arming 

systems, and aircraft gun systems; use of precision measuring tools and equipment; interpreting 

schematics and wiring diagrams; concepts and application of maintenance directives; nuclear and 

nonnuclear munitions loading and safety procedures; and proper handling, use, and disposal of 

hazardous waste and materials. 

10.1.1.2. Education. For entry into this specialty, completion of high school or General 

Education Development equivalency is mandatory. Also, completion of courses in mechanics or 

basic electronics is desirable. 

10.1.1.3. Training. Completion of a suffix specific basic aircraft armament systems course is 

mandatory for award of the 3 level Armament AFSC. 

10.1.1.4. Experience. N/A 

10.1.1.5. Other. Per the AFECD, the following are mandatory as indicated. 

10.1.1.5.1. For entry into this specialty: Normal color vision as defined in AFI 48-123, 

Medical Examination and Standards. Trainees must have a minimum score of 60 Mechanical or 

45 Electrical on their AFQT. 

10.1.1.5.2. For entry, award, and retention of these AFSCs: No record of emotional 

instability. Normal depth perception as defined in AFI 48-19. 

10.1.1.5.3. For award and retention the specialty requires routine access to Secret material 

or similar environment: For award and retention of AFSC 2W1X1X, completion of a current 

National Agency Check, Local Agency Checks and Credit (NACLC) according to AFI 31-501, 

Personnel Security Program Management. Note: Award of the 3-skill level without a completed 

NACLC is authorized provided an interim NACLC has been granted according to AFI 31-501. 

10.1.2. Training Sources and Resources. Completion of one of the suffix specific basic 

armament systems courses satisfies the knowledge and training requirements for the award of the 

13

3-skill level. A list of additional training courses to support education and training is in Part II, 

Section D of this CFETP. 

10.1.3. Implementation. The 3-skill level is awarded upon successful completion of any one of 

the suffix specific aircraft armament systems apprentice courses. 

10.2. Journeyman Level Training: 

10.2.1 Specialty Qualification. This information will be located in the official specialty 


10.2.1.1. Knowledge. In addition to the knowledge gained at the Apprentice level, the 

Armament Journeyman should have further knowledge in the areas of logistics maintenance, 

TOs, forms, supply system, armament system operations and maintenance, and aircraft 

suspension equipment. 

10.2.1.2. Education. No additional educational requirements for award of the 5-skill level. 

10.2.1.3. Training. Completion of the 5-level CDCs is required for award of the 5-skill level. 

10.2.1.4. Experience. Qualification in and possession of AFSC 2W131C/E/F/J/K/L/N/Q or Z. 

Also, experience loading and unloading munitions, or maintaining, repairing, and modifying 

munitions launch, release, suspension, or aircraft gun systems. 

10.2.1.5. Other. See paragraph 10.1.1.5. 

10.2.2. Training Sources and Resources. Qualification training and OJT will provide 

additional training and qualification on the core tasks identified in the STS. CDCs are Air Force 

publications and are mandatory for use during upgrade/qualification training when available. 

10.2.3. Implementation. Entry into upgrade training is initiated after an individual is awarded 

the 3-skill level. The individual is then enrolled in CDC 2W151A or 2W151B. The 5-skill level 

is awarded to individuals who complete 12 months of UGT (9 months for retrainees), 

qualification on all STS 5-level core tasks identified for the assigned duty position, and 

completes both 2W151A and 2W151B CDCs. Qualification training is initiated anytime an 

individual is assigned duties he/she is not qualified to perform. 

10.3. Craftsman Level Training: 

10.3.1 Specialty Qualification. This information will be located in the official specialty 


10.3.1.1. Knowledge. In addition to the knowledge gained at the Apprentice and Journeyman 

level, the Armament Craftsman should have further knowledge in the areas of explosive safety, 

AFOSH, environmental protection, expediter, maintenance and inspection systems, TOs, forms, 

supply system, troubleshooting, and wire/cable repair. 


14

10.3.1.3. Training. Completion of the 7-level CDC and the aircraft armament systems 

craftsman course is mandatory for award of the 7-skill level. 

10.3.1.4. Experience. Qualification in and possession of AFSC 2W151. Also, experience 

performing or supervising functions such as loading and unloading munitions, or maintaining, 

repairing, and modifying munitions launch, release, suspension, or aircraft gun systems. 


10.3.2. Training Sources and Resources. Seven level upgrade training will be conducted by 

certified trainers using applicable core tasks, 2W171 CDC, and the formal 7-level resident course 

J3ACR2W171. Additional information on the 7-level course is available from the Education and 

Training Course Announcements (ETCA) at https://etca.randolph.af.mil/. 

10.3.3. Implementation. Entry into upgrade training is initiated on the first day of the 

promotion cycle an individual is selected for promotion to SSgt. Qualification training is 

initiated anytime an individual is assigned duties they are not qualified to perform. The 7-skill 

level is awarded to individuals who complete 12 months of UGT, qualification on all STS 7-level 

core tasks identified for the assigned duty position, completes the 2W171 CDC, completes the 

J3ACR2W171 048 course, and attains the minimum grade of SSgt. 

10.4. Superintendent Level Training: 

10.4.1. Specialty Qualification. This information will be located in the official specialty 


10.4.1.1. Knowledge. The Armament Superintendent should have advanced knowledge and 

skills on all aspects of the armament career field. 


10.4.1.3. Training. Completion of the advanced aircraft armament systems course is mandatory 

for award of the 9-skill level (effective 1 Mar 2013). (Not mandatory for AFRC.) 

10.4.1.4. Experience. Qualification in and possession of AFSC 2W171. Also, experience 

managing and controlling functions such as loading and unloading munitions, or maintaining, 

repairing, and modifying munitions launch, release, suspension, or aircraft gun systems. 


10.4.2. Training Sources and Resources. Unit OJT will be used for training. 

10.4.3. Implementation. Entry into upgrade training is initiated when an individual possesses 

the 7-skill level and required grade. Qualification training is initiated anytime an individual is 

assigned duties they are not qualified to perform. 

Section D - Resource Constraints 

11. Purpose. This section identifies known resource constraints, which preclude optimal and 

desired training from being developed or conducted, including information such as cost and 

15

manpower. Narrative explanations of each resource constraint and an impact statement 

describing what effect each constraint has on training are included. Also included in this section 

are actions required, OPR, and target completion dates. Resource constraints will be, as a 

minimum, reviewed and updated annually. 

12. Apprentice Level Training. 

12.1. Constraints. The A-10, F-15 and F-16 courses have additional equipment requirements. 

The new RPA course will require instructor manning, student man-years, and equipment. 

12.1.1. Impact. The fighter courses will be implemented as scheduled but may have training 

deficiencies if required equipment is not delivered on schedule. The RPA course will not be 

implemented until instructor manning and student man-years are authorized. The course may be 

implemented before all equipment is available but students may graduate early without all 

requested training. 

12.1.2. Resources Required. The A-10 course needs a CBU-103. The F-15 needs a UPLA. 

The F-16 course needs 2 BRU-61 WLT, CMBRE, ADU-890 and a GBU-10. The RPA course 

needs: 1 instructor, 2 student man-years, 1 MQ-9, 3 BRU-15, 1 A/N-AWM 101A Tester, 3 MA- 

4B Bomb Racks, 1 mid-station pylon, 1 inboard pylon, 1 M299 Launcher, 1 GBU-12, and 1 

GBU-38. 

12.1.3. Action Required. Schoolhouse will submit out-of-cycle requests for the additional 

munitions and submit appropriate requisition documents through supply for the identified 

equipment items. Various OPRs are identified within the action items for actual acquisition of 

the equipment items. Additionally, formal Course Resource Estimates (CRE) will be submitted 

through HQ AETC. 

12.2. OPR and Target Completion Date. The schoolhouse Training Manager and the AETC 

Training Pipeline Manager are responsible for tracking open action items from the U&TW. 

Updates are posted quarterly on the Armament SharePoint. 

13. Five Level Training. No resource constraints. 

14. Seven Level Training. No resource constraints 

Section E - Transitional Training Guide 

Note: There is currently no transition training requirements. This area is reserved. 

Part II 

Section A – Specialty Training Standard (STS) 

15. Implementation. The 2W1X1 STS will be maintained within TBA. AETC will begin 

using this STS for technical training for 3-level classes beginning February 2012 and 7-level 

classes beginning Apr 2012. 

16

16. Purpose. An STS describes in terms of tasks and knowledge the expectations of an individual 

in a specific specialty is expected to perform or to know on the job. The STS identifies the training 

requirements to achieve a 3-, 5-, 7-skill level, and 9 level within the 2W1X1 AFSC. 

16.1. Column 1 (Task, Knowledge and Technical Reference) lists the most common tasks, 

knowledge, and technical references (TR) necessary for airman to perform duties in the 3-, 5-, 

and 7-skill level. An asterisk before the STS number indicates a wartime course objective. 

16.2. Column 2 (Core Tasks) identifies specialty-wide minimum core task training requirements 

for award of 2W151 and 2W171 AFSCs. A ―5B‖ indicates 5-level backshop core task; ―5F‖ 

indicates 5-level flightline core task and a 7 indicates core tasks for all 7-levels. 

16.3. Column 3 (Certification for OJT) is used to record completion of tasks and knowledge 

training requirements. Use automated training management systems to document technician 

qualifications, if available. Task certification must show a certification/completed date. 

16.4. Column 4 (Proficiency Codes Used to Indicate Training/Information Provided) shows 

formal training and correspondence course requirements. It indicates the proficiency to be 

demonstrated on the job by the graduate as a result of training on the task/knowledge provided 

by the correspondence course. Note: When two codes are used, the first code (the code to the 

left of the ―/‖) is the established requirement for resident training on the task/knowledge, and the 

second code (the code to the right of the ―/‖) indicates the level of training provided in the course 

due to resource constraints. 

17. Qualitative Requirements. The qualitative requirements are identified with proficiency 

codes used to indicate the level of training provided by resident training and CDCs. Additional 

information can be found in the Qualitative Requirements table within the verbiage portion of the 

2W1X1 product in TBA. 

18. Job Qualification Standard (JQS). The STS becomes a JQS for OJT training when placed 

in AF Form 623, Individual Training Record, and used according to AFI 36-2201. 

18.1. Performance Standard. Tasks in column 1 are trained and qualified to the go/no go 

level. ―Go‖ means the individual can perform the task without assistance and meets the local 

requirements for accuracy, timeliness, and correct procedures. (―Go‖ level equates to 3c in the 

STS proficiency code key.) 

18.2. Documentation. Document and certify completion of training IAW AFI 36-2201, 

Chapter 6 and the TBA Application User’s Guide. Supervisors, trainers, and trainees must 

ensure all training documentation is contained within an Airman’s Individual Training Plan 

(ITP). 

18.3. Transcribing. Upon publication of a new CFETP, transcribe within 120 days (240 days 

for ARC). When transcribing tasks from an external source into TBA, the tasks go into the 

Airman’s archived task list. At that point, the supervisor can then select which tasks should be 

unarchived and moved to an active status. 

17

19. Weighted Airman Promotion System (WAPS). The STS is a guide for development of 

promotion tests used in the WAPS. Specialty Knowledge Tests (SKTs) are developed at the 

AETC Airman Advancement Division, by senior NCOs with extensive practical experience in 

their career fields. The tests sample knowledge of STS subject matter areas judged by test 

development team members as most appropriate for promotion to higher grades. Questions are 

based upon study references listed in the WAPS catalog. Individual responsibilities are in 

Chapter 1 of AFI 36-2605, Air Force Military Personnel Testing System. WAPS is not 

applicable to the Air National Guard. 

20. Recommendations. Report unsatisfactory performance of individual course graduates 

using the Graduate Assessment Survey (GAS). The GAS will be reviewed by the wing weapons 

manager or equivalent after the immediate supervisor makes comments to make sure the 

response is directed toward technical training rather than personality traits. Report inadequacies 

and suggested corrections to this STS through channels to 363 TRS/TRR, DSN 736-1828 

referencing specific STS paragraphs. A customer service information line (CSIL) is also 

available at DSN 736-5236 or email 82TRGCSIL@sheppard.af.mil. 

Section B – Course Objective List 

21. Measurement: Each objective is indicated as follows: W indicates task or subject 

knowledge, which is measured using a written test. PC indicates required task performance, 

which is measured with a performance progress check. P indicates required task performance, 

which is measured with a performance test. PC/W indicates separate measurement of both 

knowledge and performance elements using a written test and a performance progress check. 

22. Standard: The standard is a minimum of 70% on written examinations. Standards for 

performance measurement are indicated in the objective and delineated on the individual 

progress checklist. Instructor assistance is provided as needed during the progress check, and 

students may be required to repeat all or part of the behavior until satisfactory performance is 

attained. 

23. Proficiency Level: Most task performance is taught to the ―2b‖ proficiency level which 

means the student can do most parts of the task, but does need assistance on the hardest parts of 

the task (partially proficient). The student can also determine step-by-step procedures for doing 

the task. Additional information can be found in the Qualitative Requirements table within the 

verbiage portion of the 2W1X1 product in TBA. 

24. Course Objectives: A detailed listing of formal training objectives may be obtained by 

submitting a written request to the AETC Training Manager, 363 TRS/TRR, 520 Missile Road, 

Stop 244, Sheppard AFB TX 76311-2261. 

Section C - Support Material 

Note: There are currently no support materials. This area is reserved. 

Section D - Training Course Index 

18

25. Purpose. This section of the CFETP identifies training courses available for the specialty. 

26. Air Force In-Residence Courses. 

26.1 Technical Training. Course summary information can be found on the Education and 

Training Course Announcements website https://etca.randolph.af.mil. 

COURSE NUMBER TITLE LOCATION 

J3ABR2W131C000 Aircraft Armament Systems Apprentice (A-10) Sheppard 

J3ABR2W131E025 Aircraft Armament Systems Apprentice (F-15) Sheppard 

J3ABR2W131F026 Aircraft Armament Systems Apprentice (F-16) Sheppard 

J3AQR2W131J028 Aircraft Armament Systems Apprentice (F-35) Sheppard 

J3ABR2W131J028 Aircraft Armament Systems Apprentice (F-35) Eglin 

J3ABR2W131K003 Aircraft Armament Systems Apprentice (B-52) Sheppard 

J3ABR2W131L001 Aircraft Armament Systems Apprentice (B-1) Sheppard 

J3ABR2W131N027 Aircraft Armament Systems Apprentice (F-22) Sheppard 

J3ABR2W131Q051 Aircraft Armament Systems Apprentice (RPA) Sheppard 

J3ABR2W131Z048 Aircraft Armament Systems Apprentice (Special Missions) Sheppard 

J3ACR2W171 048 Aircraft Armament Systems Craftsman Sheppard 

J3AZR2W191 048 Advanced Aircraft Armament Systems Sheppard 

26.2. Field Training. Specific locations can be found on the Education and Training Course 

Announcements website https://etca.randolph.af.mil. 

A/C COURSE NUMBER TITLE 

A-10 J4AMP2W1X1 A00A A-10 Aircraft Armament Systems Craftsman (ALA Maintenance) 

A-10 J4AMP2W1X1 B00B A-10 Weapons Maintenance (Off-Equipment) 

A-10 J4AMP2W1X1 D00A A-10C 2W1X1 Weapons Differences Course 

A-10 J4AMP2W1X1 E00A A-10 Aircraft Weapons Systems (On Equipment) 

B-1 J4AMP2W1X1 A01B B-1B Aircraft Armament System Maintenance (Flightline) 

B-1 J4AMP2W1X1 B01A B-1B Aircraft Armament Systems (Backshop) 

B-1 J4AMP2W1X1 C01A B-1B Aircraft Armament Systems (Flightline Troubleshooting) 

B-2 J4AMP2W1X1 B02A B-2 Aircraft Armament Systems Certification Training (Flightline) 

B-2 J4AMP2W1X1 C02B B-2 Aircraft Armament Systems Certification Training (Backshop) 

B-52 J4AMP2W1X1 A03A B-52H Aircraft Armament System Maintenance 

C-130 J4AMP2W1X1 A17A AC-130 25MM Gun (GAU-12/U) System (IM) 

C-130 J4AMP2W1X1 C17A 25 MM Ammunition Loading System (ALS) GFU-23/E Craftsman (I/M) 

C-130 J4AMP2W1X1 D17A AC-130U 40MM & 105MM Gun System Maintenance (O/M) 

C-130 J4AMP2W1X1 E17A AC-130U 25MM Gun System Maintenance (O/M) 

C-130 J4AMP2W1X1 F17A AC-130H 40mm & 105mm Armament Systems Maintenance 

C-130 J4AMP2W1X1 G17A AC-130 40mm BOFORS Gun (M2A1) System (I. Maintenance.) 

C-130 J4AMP2W1X1 H17A AC-130 105MM Aerial Cannon System (I/M) 

C-130 J4AMP2W1X1 I17A AC-130H Hot Gun Response 

C-130 J4AMP2W1X1 J17A AC-130U Weapons Preflight/Postflight Checks 

C-130 J4AMP2W1X1 K17A AC-130H Weapons Preflight/Postflight Checks 

C-130 J4AMP2W1X1 L17A AC-130U 40mm Gun System Maintenance (O. Maintenance.) 

C-130 J4AMP2W1X1 M17A AC-130U Hot Gun Response 

Cv-22 J4AMP2W1X1 A21A CV-22 Armament Systems Craftsman (O/I Maintenance) 

19

F-15 J4AMP2W1X1 A25A F-15E Aircraft Armament Maintenance (Weapons Delivery) (In Shop) 

F-15 J4AMP2W1X1 B25A F-15E Aircraft Gun System Maintenance (In Shop) 

F-15 J4AMP2W1X1 C25A F-15E Aircraft Gun System Maintenance (Flight Line) 

F-15 J4AMP2W1X1 D25A F-15 A-D Weapons Maintenance (Gun System) (In Shop) 

F-15 J4AMP2W1X1 E25A F-15 Weapons Maint (Programmable Armament Control Set) (PACS) 

F-15 J4AMP2W1X1 F25A F-15E Aircraft Armament System Maint (Weapons Delivery) (Flight Line) 

F-15 J4AMP2W1X1 G25A F-15 Weapons Maintenance 

F-15 J4AMP2W1X1 H25A F-15 Weapons Maintenance (Suspension Equipment) (In Shop) 

F-15 J4AMP2W1X1 I25A F-15A-E Aircraft Armament Maintenance (Weapons Delivery) (In Shop) 

F-16 J4AMP2W1X1 A26A F-16 M61A1 20 MM Gun System (IM) 

F-16 J4AMP2W1X1 B26A F-16 Armament System Gun Boresight 

F-16 J4AMP2W1X1 C26A F-16 Armament Maintenance (AME) 

F-16 J4AMP2W1X1 D26A LAU-118(V)4/A Launcher (I/M) 

F-16 J4AMP2W1X1 E26A F-16C/D Aircraft Armament Systems 

F-16 J4AMP2W1X1 G26A F-16 Aircraft Armament System Mx - BRU-57 Smart Bomb Rack 

F-16 J4AMP2W1X1 H26A F-16 C/D CCIP Aircraft Armament System (Advanced Troubleshooting) 

F-16 J4AMP2W1X1 I26A F-16C/D (CCIP) Aircraft Armament System Troubleshooting 

F-16 J4AMP2W1X1 J26A F-16C/D Aircraft Armament System Troubleshooting 

F-22 J4AMP2W1X1 A27B F/A-22 Armament Weapons Bay Door System and Suspension 

F-22 J4AMP2W1X1 B27A F-22 Armament M61A2 Gun System (Flightline Conversion Training) 

F-22 J4AMP2W1X1 C27A F-22 Armament Stores Management System (SMS) (Conversion Training) 

F-22 J4AMP2W1X1 D27A F-22 Aircraft Armament Maintenance (Weapons Delivery) (In Shop) 

F-22 J4AMP2W1X1 E27A F-22 M61A2 20 MM Gun System (IM) 

MH-60 J4AMP2W1X1 A30B MH-60G Weapons Maintenance (O/I LEVEL) 

J4AMP2W1X1 A48A Armament System (20MM UALS) Intermediate Maintenance (I/M) 

J4AMP2W1X1 B48A Armament System (20MM LALS) Intermediate Maintenance (I/M) 

J4AMP2W1X1 C48A Armament System (BRU-61/A) Intermediate Maintenance (I/M) 

J4AMP30000 A48A Advanced Wire Maintenance 

J4AMP30000 AS0A Basic Soldering Techniques 

J4AMP30000 AS1A Miniature Electronic Repair (2M) 

J4AMP30000 AS2A Micro-Miniature Electronic Repair (2M) 

J4AMP30000 AS3A Module Test & Repair Test Equipment 

27. Extension Course Programs: 

27.1 Air University (AU) Courses. 

COURSE NUMBER TITLE USER 

CDC 2W151A & B Aircraft Armament Systems Journeyman 2W131 in UGT 

CDC 2W171 Aircraft Armament Systems Craftsman 2W151 in UGT 

27.2 Exportable Courses. 

COURSE NUMBER TITLE MEDIA 

J6AZW2AX5X 0F1A IMDS for Flight Line Web-based Training 

J6AZW2AX5X 0B1A IMDS for Backshop Web-based Training 

J6AZW2AX5X 0S1A IMDS for Supervisors Web-based Training 

20

28. Other Training/Courseware. Training on the Technical Order System is available from 

https://afkm.wpafb.af.mil/community/views/home.aspx?Filter=OO-TO-MC-35. Additional 

multimedia products covering a wide range of topics can be found at 

https://367trss.hill.af.mil/catalog. When available at unit level, Air Force Engineering and 

Technical Services (AFETS) can be used for training assistance for non-loading weapons tasks 

such as installation and removal of Alternate Mission Equipment (AME), gun and gun system 

component installation/removal, slack adjustment, troubleshooting, test equipment use, 

maintenance and repair. Coordinate directly with the weapons technician assigned to AFETS at 

your unit. 

Section E - MAJCOM Unique Requirements 

29. MAJCOM manadatory training requirements (not applicable to ANG/AFRC) are listed in 

the MAJCOM Mandatory Course List (MMCL) per AFI 36-2232. 

BY ORDER OF THE SECRETARY OF THE AIR FORCE 

OFFICIAL JUDITH A. FEDDER, Lt Gen, USAF 

DCS/Logistics, Installations and Mission Support 

21

This Block Is For Identification Purposes Only 

Name Of Trainee 

Printed Name (Last, First, Middle Initial) 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

Initials (Written) 

Printed Name Of Certifying Official And Written Initials 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

N/I 

QUALITATIVE REQUIREMENTS 

Scale 

Value 

Proficiency Code Key 

Definition: The individual 

Task 

Performance 

Levels 

1 

2 

3 

4 

Can do simple parts of the task. Needs to be told or shown how to do most of the task. (Extremely 

Limited) 

Can do most parts of the task. Needs only help on hardest parts. (Partially Proficient) 

Can do all parts of the task. Needs only a spot check of completed work. (Competent) 

Can do the complete task quickly and accurately. Can tell or show others how to do the task. 

(Highly Proficient) 

a Can name parts, tools, and simple facts about the task. (Nomenclature) 

*Task 

Knowledge 

Levels 

b 

c 

d 

Can determine step by step procedures for doing the task. (Procedures) 

Can identify why and when the task must be done and why each step is needed. 

(Operating Principles) 

Can predict, isolate, and resolve problems about the task. (Advanced Theory) 

**Subject 

Knowledge 

Levels 

Explanations 

A 

B 

C 

D 

Can identify basic facts and terms about the subject. (Facts) 

Can identify relationship of basic facts and state general principles about the subject. (Principles) 

Can analyze facts and principles and draw conclusions about the subject. (Analysis) 

Can evaluate conditions and make proper decisions about the subject. (Evaluation) 

* A task knowledge scale value may be used alone or with a task performance scale value to define a level of knowledge for a specific task. 

(Example: b and 1b) 

** A subject knowledge scale value is used alone to define a level of knowledge for a subject not directly related to any specific task, or for a 

subject common to several tasks. 

- This mark is used alone instead of a scale value to show that no proficiency training is provided in the course or CDC. 

/ This mark is used with proficiency codes to show training required but not given due to limitations in resources. (ex. 2b/b, 3c/-, etc.) 

NOTE: All tasks and knowledge items shown with a proficiency code are trained during war time. 

Attachment 1 22 1 December 2009 

SSAN

AIRMUNITIONS MATRIX 

The X denotes munitions chosen for specific resident course load and unload training (1b level) 

and munition characteristics training (A level). The * denotes munitions chosen for 

characteristics training only (A level) in the respective resident course. The F denotes munitions 

forecasted for future training but are not covered in the resident courses at this time. 

J3ABR2W131 C E F N K K L Z Z Q Q 

A-10 F-15 F-16 F-22 B-52 B-2 B-1 C-130 H-60 MQ-1 MQ-9 

Ammunition X X X X - - - * * - - 

AGM-65 X - X - - - - - - - - 

AGM-86 - - - - * - - - - - - 

AGM-88 - - X - - - - - - - - 

AGM-154 (JSOW) - - - - - - - - - - - 

AGM-158 (JASSM) - X - - X * X - - - - 

AIM-9/AIM-9X X X X X - - - - - - - 

AIM-120 - X X X - - - - - - - 

ALE-50 - - * - - - * - - - - 

B-61 - * * - X * - - - - - 

B-83 - - - - * * - - - - - 

BDU-33 X - X - - - - - - - - 

BLU-109 - - - - - - - - - - - 

AGM-114 Hellfire - - - - - - - - - X X 

CBU-87/89 * * - - - - - - - - - 

CBU-103/104/105/107 X - X - X * X - - - - 

Chaff (all types) X X X X - - X * * - - 

Flares (all types) X X X X * - X * * - - 

GBU-10 X - X - - - - - - - - 

GBU-12 * X * - - - - - - - X 

GBU-24 - - - - - - - - - - - 

GBU/EGBU-27 - * - - - - - - - - - 

GBU/EGBU-28 - - - - - * - - - - - 

GBU-31 (JDAM) - X - - X * X - - - - 

GBU-32 (JDAM) - - - X - - - - - - - 

GBU-38 (JDAM) X * X - - * X - - - X 

GBU-39 (SDB) - X * * - - - - - - - 

GBU-54 (LJDAM) * * * - - - * - - - - 

Impulse cartridges X X X X X - X - * - - 

MK-82/84 X - - - X * * - - - - 

Naval Mines - - - - * - - - - - - 

Rocket (2.75‖) X - * - - - - - - - - 

SUU-25 X - - - - - - - - - - 

SUU-67 (6 missiles) - - - - X - - - - - - 

ADM-160B (MALD) - - * - * - - - - - - 

23 1 January 2012

1. Tasks 2. Core 3. Certification for OJT 4. Proficiency Codes Used To Indicate 

Tasks 

Training/Information Provided 

Knowledge And Technical References A B A B C D E A 

B 

C 

3-Skill Level 5-Skill Level 7-Skill Level 

5 7 Tng Start Tng Done Trainee Trainer Certifier (1) (2) (1) (2) (1) (2) 

Level Level 

Initials Initials Initials Crse CDC Crse CDC Crse CDC 

1 AIRCRAFT ARMAMENT 

SYSTEMS CAREER FIELD 

1 January 2012 

2 2W1X1 General Requirements 

TR: AFIs 21-101, 36-2502, 2W1X1 

CFETP, AF Enlisted Classification 

Directory 

* 2.1 Progression in the 2W1X1 

Career Field 

B - - B - - 

* 2.2 Duties of AFSC 2W1X1 B - - B - - 

* 2.3 Relationship to Air Force 

Commands and Missions 

B - - B - B 

2.4 MUNITIONS ENTERPRISE 

2.4.1 Conventional 

TR: AFPD 21-200, AFI 10-401, 21- 

101, 21-200, AFMAN 91-201, TTP 

- - - A - - 

2.4.2 Nuclear 

TR: AFDD 3-72, AFGM 20-1, AFI 

10-201, 21-204, 63-125, 91-101, 91- 

102, 91-103, 91-107, 91-111, 91-112, 

91-221 

- - - A - - 

2.5 SECURITY 

TR: AFI 10-701, 31-Series, 91-Series, 

DoD 5200.1, DoDR 5210.42, DoD 

Manual 4160.21-M-1 

2.5.1 Resources Security 

2.5.1.1 Facilities - - - B - - 

* 2.5.1.2 Munitions B - - B - - 

2.5.1.3 Equipment and Supplies - - - B - - 

2.5.1.4 Firearms - - - B - - 

2.5.1.5 Demilitarization Requirements - - - A - - 

2.5.2 Communications Security 

(COMSEC) 

2.5.2.1 Classification of Information - - - - - - 

2.5.2.2 Prevention of Security 

Violations 

- - - - - - 

2.5.2.3 Security Precautions Involved 

in Communications 

- - - - - - 

* 2.5.3 Specific OPSEC 

Vulnerabilities of AFSC 

2W1X1 

B - - B - - 

2.5.4 COMPUSEC - - - - - - 

2.5.5 Nuclear Surety Program 

TR: AFI 91-101 

2.5.5.1 Personnel Reliability Program 

(PRP) 

* 2.5.5.1.1 Principles A - - B - - 

* 2.5.5.1.2 Personal Responsibilities A - - B - - 

* 2.5.5.1.3 Types of PRP A - - B - - 

2.5.5.2 Two Person Concept (TPC) 

TR: DoD S-5210.42-R, AFMAN 10- 

3902, AFI 91-Series 

* 2.5.5.2.1 Principles A - - B - - 


* 2.5.5.2.3 Principles of No-Lone Zone A - - B - - 

24 1 January 2012


Tasks 



B 

C 



Level Level 


2.5.5.3 Weapons System Safety Rules 

(WSSR) 

* 2.5.5.3.1 Principles A - - B - - 


* 2.5.5.3.3 Types of Faults A - - B - - 

2.5.5.4 Nuclear Certified Equipment 

(NCE) 

TR: AFI 91-103, MNCL, AFI 63-125 

* 2.5.5.4.1 Principles of NCE Program A - - B - - 

* 2.5.5.4.2 Master Nuclear Certification 

List (MNCL) 

A - - B - - 

2.5.5.4.3 Verify NCE using the MNCL * - - - - 1b - 

2.5.5.5 Accident, Incident, and 

Deficiency Reporting 

* 2.5.5.5.1 Principles A - - B - - 

* 2.5.5.5.2 Types of Reports A - - B - - 

2.5.5.5.3 Process Dull Sword - - - - 1b - 

* 2.5.5.6 Tamper Control and Detection 

Program 

A - - B - - 

2.6 EXPLOSIVE SAFETY 

TR: TOs 00-25-172, 11A-1-33, AFI 

91-101, 91-202, 91-204, AFMAN 91- 

201 

* 2.6.1 Hazards B - - B - B 

* 2.6.2 Weapons Safety B - - B - B 

2.6.3 Net Explosive Weight and Site 

Plans 

- - - - B B 

2.6.4 Site Licensing Process - - - - - A 

2.6.5 Quantity-Distance (Q-D) - - - - - B 

2.6.6 Handling of Explosive Loaded 

Aircraft 

* - - - - - B 

2.6.7 Accident, Incident, Deficiency 

& Mishap Reports 

- - - - - B 

* 2.6.8 Live Fire / Explosive 

Familiarization 

- - - - - - 

2.7 AF OCCUPATIONAL 

SAFETY AND HEALTH 

(AFOSH) AND 

ENVIRONMENTAL 

PROTECTION PROGRAMS 

TR: TOs 00-25-172, 11A-1-33, 31-1- 

141-1, AFIs 32-2001, 32-7065, 66-51, 

90-821, Applicable AFOSH Stds: 91- 

Series, Installation Restoration 

Program Management Guidance 

Handbook, AFP-19-5 

2.7.1 AFOSH 

* 2.7.1.1 Hazards of AFSC 2W1X1 B - - B - - 

2.7.1.2 AFOSH Standards for AFSC 

2W1X1 

- - - A B - 

* 2.7.1.3 Safety Practices Applicable to 


B - - B B - 

* 2.7.1.4 FOD Prevention B - - B - - 

2.7.2 Environmental Protection 

25 1 January 2012


Tasks 



B 

C 



Level Level 


2.7.2.1 Federal Hazard 

Communication Training 

Program 

- - - - - - 

2.7.2.2 Hazards and Toxic Waste 

Management 

2.7.2.2.1 Functions and Responsibilities - - - B - - 

2.7.2.2.2 Sources and Characteristics - - - B - - 

2.7.2.2.3 Identification / Disposal - - - B - - 

2.7.2.2.4 Hazardous Materials / Waste - - - B - - 

2.8 SUPERVISION 

TR: TO 00-20-1, AFIs: 21-101, 21- 

103, 21-201, 36-2201, 36-2202, 91- 

Series, -1 Flight Manuals 

2.8.1 Orient New Personnel - - - - - - 

2.8.2 Assign Personnel to Positions - - - - - - 

2.8.3 Plan Work Assignments and 

Priorities 

- - - - B A 

2.8.4 Schedule Work Assignments - - - - - A 

2.8.5 Munitions Maintenance 

Handling Equipment (MMHE) 

- - - - - A 

2.8.6 Establish 

2.8.6.1 Work Methods - - - - - - 

2.8.6.2 Work Controls - - - - - - 

2.8.6.3 Performance Standards - - - - - - 

2.8.7 Evaluate Work Performance 

of Subordinate Personnel 

- - - - - - 

2.8.8 Resolve Technical Problems 

Encountered by Subordinate 

Personnel 

- - - - - - 

2.8.9 Recommend Policy Changes 

on Utilization of Personnel 

and Equipment 

- - - - - - 

2.8.10 Counsel Personnel and 

Resolve Individual Problems 

- - - - - - 

2.8.11 Initiate Action to Correct 

Substandard Personnel 

Performance 

- - - - - - 

2.8.12 Initiate Action to Commend 

Superior Performance 

- - - - - - 

2.8.13 Perform Self-Inspections - - - - - - 

2.8.14 Inspection/Evaluation 

Programs 

- - - - - - 

2.8.15 Expediter 

2.8.15.1 Flightline Communications 

Requirements 

- - - - B B 

2.8.15.2 Flightline Maintenance 

Requirements 

- - - - - B 

2.8.15.3 Flightline Loading Operations 

Requirements 

- - - - - B 

2.8.15.4 Proficiency Loading and 

Weapons Load Training 

- - - - - - 

2.8.15.5 Aircraft Configuration - - - - - B 

2.8.15.6 Aircraft Related Status Codes - - - - B B 

26 1 January 2012


Tasks 



B 

C 



Level Level 


2.8.15.7 Aircraft Status Determination 

by the Mission Essential 

Subsystems Listing (MESL) 

- - - - B B 

2.8.15.8 Aircraft Impoundment and 

Release 

- - - - B B 

2.8.15.9 Flying Schedules * - - - - B B 

2.8.15.10 Munitions Accountability and 

Reconciliation Procedures 

- - - - B - 

2.8.15.11 Combat Ammunitions System 

(CAS) 

2.8.15.11.1 Description B - - - - B 

2.8.15.11.2 Use CAS * - - - - 2b - 

2.8.15.12 Cannibalization Procedures - - - - B - 

2.8.15.13 Nuclear System Fault Isolation - - - - - - 

2.8.15.14 Use Forms 

2.8.15.14.1 AF Form 2430 or Equivalent * - - - - 2b B 

2.8.15.14.2 AF Form 2434 or Equivalent - - - - 2b B 

2.8.15.15 Emergency Action Procedures - - - - - - 

2.9 TRAINING 

TR: AFI 36-2101, 36-2201, AFMAN 

36-2236 

2.9.1 Evaluate Personnel to 

Determine Need for Training 

- - - - - - 

2.9.2 Plan and Supervise OJT 

2.9.2.1 Prepare Job Qualification 

Standards 

- - - - - - 

2.9.2.2 Conduct Training - - - - - - 

2.9.2.3 Counsel Trainees on their 

Progress 

- - - - - - 

2.9.2.4 Monitor Effectiveness of 

Training 

2.9.2.4.1 Career Knowledge Upgrade - - - - - - 

2.9.2.4.2 Job Proficiency Upgrade - - - - - - 

2.9.2.4.3 Qualification - - - - - - 

2.9.3 Maintain Training Records * - - - - B 

2.9.4 Evaluate Effectiveness of 

Training Program 

- - - - B B 

2.9.5 Recommend Personnel for 

Training 

- - - - - - 

2.9.6 Manage CDCs Progression - - - - B B 

2.10 LOGISTICS 

MAINTENANCE 

TR: TO 00-20-Series, AFI 21-101, 

AFCSM 21-Series 

* 2.10.1 Basic Functions within the 

Maintenance Complex 

A - - B - - 

* 2.10.2 Maintenance Concepts A - - - - - 

* 2.10.3 Maintenance Data Collection A - - B - - 

* 2.10.4 Processing and Controlling of 

Parts 

A - - B - - 

* 2.10.5 Management of Training A - - A - B 

27 1 January 2012


Tasks 



B 

C 



Level Level 


2.10.6 OPLAN / Employment 

Planning 

- - - - - B 

2.10.7 Mobility Deployment Pallet 

Build-Up 

- - - - - B 

2.10.8 DD Form 1348-1A - - - - - B 

2.10.9 Generation Flow Planning - - - - - B 

2.10.10 Nonnuclear Consumable 

Annual Analysis (NCAA) and 

Wartime Consumable 

Distribution Objective 

(WCDO) 

- - - - - B 

2.10.11 War Mobilization Plans - - - - - B 

2.11 MAINTENANCE AND 

INSPECTION 

TR: TO 00-20-Series, 00-35D-54, AFI 

21-101, AFCSM 21-Series, AFMAN 

23-215 

* 2.11.1 Maintenance Systems A - - B - B 

* 2.11.2 Inspection Systems A - - B B B 

2.11.3 Maintenance Data Collection 

Forms 

* 2.11.3.1 Characteristics A - - - - - 

2.11.3.2 Complete AFTO Form 349 - - - - - - 

* 2.11.3.3 Complete AFTO Form 350 * 2b - - - - - 

2.11.4 Report of Discrepancy (ROD) 

/ Supply Discrepancy Report 

(SDR) 

- - - - - B 

2.11.5 Deficiency Reporting 

* 2.11.5.1 System Description A - - - B B 

2.11.5.2 Process Deficiency Reports * - - - - 2b B 

2.11.5.3 Deficiency Report Criterion - - - B - B 

2.11.6 Maintenance Information 

Systems 

* 2.11.6.1 Characteristics B - - B - B 

* 2.11.6.2 Create / Schedule Job * 2b - - - - - 

* 2.11.6.3 Open / Close Job * 2b - - - - - 

* 2.11.6.4 Run Maintenance Screen 

Inquiry 

* 2b - - - 2b - 

2.11.6.5 Run Maintenance Supervisory 

Screen 

* - - - - 2b - 

2.11.6.6 Review Automated Histories * - - - - 2b - 

2.11.6.7 Use and Interpret Management 

Database Products 

* - - - - - - 

2.11.6.8 Perform Supervisory 

Production Inspection of 

Completed Maintenance 

Action on Armament Systems 

* - - - - - - 

2.12 TECHNICAL ORDERS (TO) 

TR: TO 00-5-1, 00-5-15, AFI 21-303, 

AFPD 21-3 

* 2.12.1 Characteristics B - - B - - 

* 2.12.2 Locate Desired Information * 2b - - B - - 

28 1 January 2012


Tasks 



B 

C 



Level Level 


* 2.12.3 Use Technical Orders / Job 

Guides when Performing 

Maintenance and Inspections 

* 2b - - B - - 

* 2.12.4 Technical Order Files A - - B - - 

* 2.12.5 TO Improvement Program B - - B - B 

2.12.6 TO / TCTO Management - - - - B B 

2.13 MAINTENANCE AND 

EQUIPMENT FORMS 

TR: TO 00-20-1, AFGM 20-1, 

AFMAN 23-110 

2.13.1 Aircraft Forms 

2.13.1.1 Manual 

* 2.13.1.1.1 Characteristics B - - B - B 

* 2.13.1.1.2 Complete AFTO Form 781A F 2b - - - - - 

2.13.1.1.3 Complete AFTO Form 781H - - - - - - 

2.13.1.1.4 Complete AFTO Form 781K - - - - - - 

2.13.1.2 Automated 

2.13.1.2.1 Characteristics - - - - - B 

2.13.1.2.2 Complete AFTO Form 781A F - - - - - - 

2.13.1.2.3 Complete AFTO Form 781H - - - - - - 

2.13.1.2.4 Complete AFTO Form 781K - - - - - - 

2.13.2 Equipment Forms 

* 2.13.2.1 Characteristics A - - B - B 

* 2.13.2.2 Use AFTO Forms 244 / 245 * 2b - - - - - 

* 2.13.3 Historical Records (AFTO 

Form 95 / Automated 95) 

* A - - B - B 

2.13.4 Condition Tags 

* 2.13.4.1 Characteristics A - - B - B 

2.13.4.2 Use DD Form 1574 * - - - - - - 

2.13.4.3 Use DD Form 1575 - - - - - - 

2.13.4.4 Use DD Form 1576 - - - - - - 

2.13.4.5 Use DD Form 1577 / 1577-1 - - - - - - 

2.13.4.6 Use DD Form 1577-2 - - - - - - 

2.14 SUPPLY SYSTEM 

TR: AFI 21-101, 21-103, 21-110, 21- 

200 Series, 23-111, AFCAT 21-209, 

AFMAN 23-110, TO 35-1-24 

2.14.1 Base Supply 

2.14.1.1 Supply Discipline - - - B - B 

2.14.1.2 Issue Procedures - - - B - B 

2.14.1.3 Turn-In Procedures - - - B - B 

2.14.1.4 DIFM Procedures - - - B B B 

2.14.1.5 SPRAM - - - B B B 

2.14.1.6 Readiness Spares Packages 

(RSP) 

- - - - - B 

2.14.1.7 Stock Fund - - - - - B 

2.14.1.8 AFTO Form 375 - - - - - B 

2.14.1.9 Air Force Equipment 

Management System 

(AFEMS) 

- - - - B B 

2.14.1.10 Allowance Standards (AS) - - - - B B 

2.14.1.11 Nuclear Weapons Related 

Material (NWRM) 

29 1 January 2012


Tasks 



B 

C 



Level Level 


2.14.1.11.1 Principles A - - B - - 

2.14.1.11.2 Tracking - - - - - - 

2.14.2 Munitions Supply 

2.14.2.1 Munitions Issue - - - A - B 

2.14.2.2 Munitions Turn-In - - - A - B 

2.14.2.3 Munitions Forecasting - - - - - B 

2.14.2.4 Nuclear Ordnance Commodity 

Management (NOCM) 

- - - - - B 

2.14.2.5 Items of Special Interest 

Reporting 

- - - - - B 

2.15 CORROSION CONTROL 

TR: TO 1-1-2 

* 2.15.1 Identification B - - - - - 

2.15.2 Procedures - - - B - - 

2.16 EQUIPMENT AND TOOLS 

TR: TO 0-4-6-2, 1-1A-8, Applicable 

Equipment TO 32-1-101, AFI 21-101 

* 2.16.1 Use Torque Wrench * 3b - - - - - 

2.16.2 Use Measuring Equipment 

* 2.16.2.1 Thickness Gauge 2b - - - - - 

* 2.16.2.2 Micrometer 2b - - - - - 

2.16.2.3 Depth Gauge - - - - - - 

2.16.2.4 Pin Protrusion Gauge - - - - - - 

* 2.16.3 Use Composite Tool Kit 

(CTK) 

* 3b - - - - - 

2.16.4 Selection and Use 

* 2.16.4.1 Common Hand Tools 3b - - - - - 

2.16.4.2 Bench Grinders - - - - - - 

2.16.4.3 Pneumatic Power Tools - - - - - - 

2.16.4.4 Electric Power Tools - - - - - - 

2.16.4.5 Degreasers - - - - - - 

2.17 STRUCTURAL 

HARDWARE 

TR: TOs 00-25-234, 1-1A-8, 1-1A-14, 

1-1A-15 

* 2.17.1 Select and Use * 3b - - - - - 

* 2.17.2 Use Safety Wiring Techniques * 3b - - - - - 

2.17.3 Chafing Awareness - - - - - - 

2.18 GENERAL AIRCRAFT 

FUNDAMENTALS 

2.18.1 Principles of Armament 

System Operations 

TR: TOs 1A-10A-2-1-1, 1A-10C-2-1- 

1, 1B-1B-2-94GS-00-1, 1B-2A-94GS- 

00-1, 1B-52H-2-31GA-Series, 1B- 

52H-2-38GA-Series, 1B-52H-33-2-1, 

1B-52H-33-2-2, 1C-130(a)H-2-94JG 

series, 1F-15()-2-94GS-Series, 1F-16- 

2-94GS-00-1, 1F-117A-2-94GS-1, 1F- 

117A-33-1-2, 1H-53(M)J-2-1, 1H- 

60(H)G-2-1, 1Q-1-1, 1Q-9-1 

2.18.1.1 Bombing - - - B - - 

2.18.1.2 Missile - - - B - - 

2.18.1.3 Jettison - - - B - - 

2.18.1.4 Chaff / Flare - - - B - - 

30 1 January 2012


Tasks 



B 

C 



Level Level 


2.18.1.5 Gun / Handling System 

TR: TOs 1A-10A-2-94JG-6, 1A-10C- 

2-94JG-6, 1F-15()-2-94JG-50-1, 1F- 

16()-2-94JG-50-1, 11W1-7-15-2, 

11W1-7-16-2, 11W1-17-2, 11W1-12- 

4-32, 11W1-12-8-61, 11W1-12-11-2, 

11W1-12-12-2, 11W1-12-14-2, 

11W1-13-3-132, 11W1-13-5-2, 

11W1-15-18-1, 11W1-33-8-2 11W1- 

33-1-102, 11W1-33-6-2, 11W1-33-7- 

2, 11W2-5-2-62, NAVAIR 11- 

95M240D1-1 

2.18.1.5.1 Electrical - - - B - - 

2.18.1.5.2 Mechanical - - - B - - 

2.18.1.5.3 Theory of Operation - - - B - - 

2.18.2 Aircraft Armament Systems 

Maintenance 

TR: TOs 1A-10A-2-94JG-series, 1A- 

10C-2-94JG-series, 1B-1B-2-94JGseries, 

1B-2A-2-94JG-series, 1B- 

52H-2-31JG-series, 1B-52H-2-38JG 

-series, 1B-52H-2-38JG-series, 1C- 

130A(U)-2-94JG series; 1C-30(A)H 

-2-94JG series; 1F-15()-2-94JGseries, 

1F-16()-2-10JG-Series, 1H- 

60(H)G-112, , 1Q-1(M)B-2-94JG 

series;1Q-9(M)A-2-94JG series, 

11W1-13-6-2, 11W1-33-7-2 

2.18.2.1 Aircraft Safe for Maintenance 

Procedures 

TR: TOs 1A-10A-2-1-1, 1A-10A-33- 

1-2, 1A-10C-2-1-1, 1A-10C-33-1-2, 

1B-1B-2-05JG-10-1, 1B-1B-2-05JG- 

20-1, 1B-1B-2-05JG-50-1, 1B-2A-2- 

05JG-10-1, 1B-52H-2-2(), 1F-15()-2- 

05JG-00-1, 1F-16()-2-10JG-00-1, 1C- 

130(M)H-2-05JG-00-1, 1C-130H-2- 

05JG-00-1; 1Q-9(M)A-2-05JG-00-1, 

1Q-1(M)B-2-05JG-00-1 

- - - B - - 

2.18.2.2 Operational / Functional 

Testing 

TR: TOs 1A-10A-2-94JG-7, 1A-10C 

- - - B - - 

- 2-94JG-7, 1B-2A-2-94JG-Series, 

1B-2A-16CL-1, 1B-2A-16CL-2, 1B- 

2A-33-2-1CL-1, 1B-2A-33-2-1CL-2, 

1F-15()-2-94FI-00-Series, 1F-15()-2- 

94JG-31-Series, 1F-15()-2-94JG-32- 

Series, 1F-15()-2--94JG-50-Series, 1F- 

16()-2-94JG-30-Series, 1C-130(A)H- 

2- 94JG-70-1/-2 

2.18.2.3 Test Equipment - - - B - - 

2.18.2.4 Troubleshooting and Fault 

- - - B - - 

Isolation 

TR: TOs 1A-10A-2-94TS-2, 1A-10C- 

2-40TS-9, 1B-1B-94GS-00-1, 1B- 

52H-2-31GA-1, 1B-52H-2-38GA-1, 

1B-2A-2-94GS-00-1, 1B-2A-2- 

94GS-00-2, 1F-15()-2- 94FI-00- 

Series, 1F-16()-2-94FI-00-1, 1C- 

130(A)U-94FI-50-1, 1C-130(A)H-2- 

94FI series 

31 1 January 2012


Tasks 



B 

C 



Level Level 


2.18.2.5 Gun Safing and Clearing - - - B - - 

2.18.2.6 Gun System Boresighting 

TR: 1C-130(A)H-2-94JG series, 

- - - B - - 

1C-130(A)U-2-94JG series, 

1F-15()-2-94JG-73-1, 1F-16()-2- 

94JG-50-3, 1H-60(H)G-112, 

11W1-15-18-1 

2.18.3 Aircraft Suspension 

Equipment 

TR: TO 11B29-3-8-3, 11B29-3-21-2, 

11B29-3-22-2, 11B29-3-25-2, 11B29- 

3-25-7, 11B29-3-28-1, 11B29-3-28-2, 

11B29-3-28-7, 11B29-3-35-2, 11B29- 

3-39-2, 11B29-3-40-2, 11B29-3-52-2, 

11B29-3-53-7-1, 11B29-3-55-1, 

11B29-3-56-11, 11B29-3-60-2, 

11B29-3-61-2, 11B29-3-65-2, 11B29- 

3-66-1, 11B29-3-70-1, 11B38-2-5-1, 

11B40-2-4-3, 11L1-2-10-1, 11L1-2- 

10-7-1, 11L1-2-15-1, 11L1-2-15-8, 

11L1-2-16-2, 11L1-2-20-1, 11L1-2- 

24-2, 11L1-3-27-1, 11L1-3-28-2, 

11L1-3-29-2, 11L1-3-30-1, 11LA8-7- 

3, 11LA8-9-2, 11L1-8-13-1, 11N- 

L5002-Series, 11N-5006-1, 11N- 

L5006-2, 11N-H5083-1, 11N-H5086- 

2, 11N-H5088-2 

2.18.3.1 Nomenclature and Function of 

Parts 

- - - B - - 

2.18.3.2 Principles of Operations - - - B - - 

2.18.4 Weapons Loading Principles 

TR: TOs 1X-XX-33-X-X, 1X-XX-16 

- - - B - - 

2.18.5 Concurrent Servicing 

Operations / Dual Loading 

Operations 

TR: TOs 1X-XX-33-X-X, 1X-XX-16, 

00-25-172, AFI 21-101 

- - - B - - 

2.19 ELECTRONIC 

FUNDAMENTALS 

TR: TOs 00-25-234, 1-1A-8, 1-1A-14, 

31-1-141-1, 31-1-141-2, 31-1-141-3, 

31-1-141-4, 31-1-141-5, 31-1-141-7, 

31-1-141,8, 31-1-141-9, 31-1-141-10, 

31-1-141-13, 31-1-141-15 

2.19.1 Basic Terms 

* 2.19.1.1 Metric Notation - - - - - - 

* 2.19.1.2 DC Terms B - - B - - 

* 2.19.1.3 AC Terms B - - B - - 

2.19.2 Basic Circuits 

* 2.19.2.1 Theory of Operation B - - B - - 

* 2.19.2.2 Troubleshoot Circuits 2b - - B - - 

2.19.3 Basic Circuits Calculations 

2.19.3.1 DC - - - - - - 

2.19.3.2 AC - - - - - - 

2.19.4 Resistors 


* 2.19.4.2 Isolate Faulty Resistors 2b - - - - - 

* 2.19.4.3 Color Code A - - - - - 

2.19.5 Relays / Solenoids 

32 1 January 2012


Tasks 



B 

C 



Level Level 



* 2.19.5.2 Isolate Faulty Relays 2b - - - - - 

2.19.6 Inductors 

2.19.6.1 Theory of Operation - - - - - - 

2.19.6.2 Isolate Faulty Inductors - - - - - - 

2.19.6.3 Calculations - - - - - - 

2.19.7 Capacitors 

2.19.7.1 Theory of Operations - - - - - - 

2.19.7.2 Isolate Faulty Capacitors - - - - - - 

2.19.7.3 Calculations - - - - - - 

2.19.7.4 Color Code - - - - - - 

2.19.8 Transformers 

* 2.19.8.1 Theory of Operations B - - - - - 

2.19.8.2 Isolate Faulty Transformers - - - - - - 

2.19.8.3 Calculations - - - - - - 

2.19.9 Solid State Diodes 

* 2.19.9.1 Theory of Operation B - - - - - 

* 2.19.9.2 Isolate Faulty Solid State 

Diodes 

2b - - - - - 

2.19.9.3 Specifications - - - - - - 

2.19.9.4 Color Code - - - - - - 

2.19.10 Bipolar Junction Transistors 


2.19.10.2 Isolate Faulty Transistors - - - - - - 


2.19.11 Integrated Circuits 

2.19.11.1 Familiarization - - - - - - 

2.19.11.2 Isolate Faulty Integrated 

Circuits 

- - - - - - 


2.19.12 Solder / Desolder 

* 2.19.12.1 Soldering Safety Standards 

and Principles 

A - - - - - 

* 2.19.12.2 Terminal Connections 1b - - - - - 

2.19.12.3 PC Boards - - - - - - 

2.19.12.4 Multipin Connectors - - - - - - 

2.19.12.5 Advanced Soldering 

Techniques 

- - - - - - 

2.19.13 Assemble Solderless 

Connectors 

2.19.13.1 Crimp - - - - - - 

2.19.13.2 Coaxial - - - - - - 

2.19.13.3 Multipin - - - - - - 

2.19.14 Use Test Equipment 

2.19.14.1 Multimeter, Analog - - - - - - 

2.19.14.2 Oscilloscope - - - - - - 

2.19.14.3 Signal Generator - - - - - - 

2.19.14.4 Frequency Counter - - - - - - 

* 2.19.14.5 Multimeter, Digital * 3b - - B 3b - 

2.19.14.6 Digital Logic Probe - - - - - - 

2.19.14.7 Capacitor Tester - - - - - - 

33 1 January 2012


Tasks 



B 

C 



Level Level 


2.19.14.8 Capacitor Substitution Box - - - - - - 

2.19.14.9 Logic Current Tracer - - - - - - 

2.19.14.10 Logic Pulser - - - - - - 

2.19.14.11 Logic Analyzer - - - - - - 

2.19.15 Support Subjects 

* 2.19.15.1 Electrical Safety B - - B B - 

* 2.19.15.2 First Aid for Electrical Shock A - - B - - 

* 2.19.15.3 Electrostatic Sensitive Devices 

(ESD) 

A - - B B - 

2.19.16 Principles of Troubleshooting 

2.19.16.1 Troubleshooting - - - - B - 

2.19.16.2 Troubleshooting Technical 

Data 

- - - - B - 

2.19.16.3 Schematic Symbols / Wiring 

Diagrams 

- - - B B - 

2.19.16.4 Troubleshoot Electrical Circuit 

Malfunctions 

- - - - 3b - 

2.19.16.5 Isolate Electrical Circuit 

Malfunction using Test 

Equipment 

- - - - 3b - 

2.19.17 Wire and Cable Repair 

* 2.19.17.1 Type, Size, and Wire Repair 

Preparation 

B - - B B - 

2.19.17.2 Connectors 

* 2.19.17.2.1 Description B - - B B - 

* 2.19.17.2.2 Replacement Procedures B - - B - - 

2.19.17.2.3 Replace Rear-End Connector - - - - 3b - 

2.19.17.2.4 Replace RF Connector - - - - - - 

* 2.19.17.2.5 Replace Coaxial Cable 

Connector 

2b - - - 3b - 

2.19.17.2.6 Replace Triaxial Cable 

Connector 

- - - - 3b - 

* 2.19.17.3 Chafing Prevention B - - B 2b - 

2.19.17.4 Flat Cable Repair - - - - - - 

* 2.19.17.5 Wire Bundle Repair 2b - - - 3b - 

2.19.17.6 MIL-STD-1760 Cable Repair 

2.19.17.6.1 Characteristics - - - B - - 

2.19.17.6.2 Assemble Multiple 

Component Pin 

- - - - 1b - 

2.19.17.6.3 Splice Braided Shield - - - B - - 

34 1 January 2012

A-10 Aircraft 

1. Tasks 2. Core 3. Certification for OJT 

Tasks 

4. Proficiency Codes Used To Indicate 


Knowledge And Technical References A B A B C D E A B C 

5 

Level 


7 Tng Start Tng Done Trainee 

Level Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 

Crse CDC Crse CDC Crse CDC 

3 A-10 AIRCRAFT 

3.1 Aerospace Ground Equipment 

TR: TOs 11-1-38, 33A2-2-27-11, 

33A2-2-30-111, 34Y1-87-11, 35C2-3- 

304-1, 35C2-3-372-1, 35C2-3-372-11, 

35C2-3-372-14, 35C2-3-469-2, 35C2- 

3-469-11, 35C2-3-469-12, 35C2-3- 

469-14, 35D3-2-25-1, 35D3-2-26-1, 

35D3-2-27-1, 35D3-2-27-6WC-1, 

35D3-2-27-21, 35D3-9-23-1, 35D5-3- 

8-31, 35E9-90-11, 35F5-5-11-22, 

35F5-5-11-31, 35F5-5-16-1 

* 3.1.1 Description A - B - - 

3.1.2 MJ-1 Aerial Stores Lift Truck 

* 3.1.2.1 Inspect 1b - - - - - 

* 3.1.2.2 Operate 1b - - - - - 

* 3.1.2.3 Drive 1b - - - - - 

3.1.3 MHU-83 Munitions Handling / 

Loading Lift Truck 

* 3.1.3.1 Inspect 3b - - - - - 

* 3.1.3.2 Operate 3b - - - - - 

* 3.1.3.3 Drive 3b - - - - - 

3.1.4 MHU-114/E 

3.1.4.1 Inspect - - - - - - 

3.1.4.2 Maintain - - - - - - 

3.1.4.3 Use - - - - - - 

3.1.5 Munitions Handling Trailers 

* 3.1.5.1 Inspect 1b - - B - - 

* 3.1.5.2 Load / Unload 1b - - - - - 

3.1.5.3 Tie-Down Procedures - - - - - - 

3.1.6 Utility Trailer 

TR: 36A11-18-3-1, 36A11-18-3-4 

3.1.6.1 Inspect - - - - - - 

3.1.6.2 Maintain - - - - - - 

3.1.7 ADU-537A/E Missile- 

Munitions Loading Adapter 

3.1.7.1 Inspect - - - - - - 

3.1.7.2 Maintain - - - - - - 

3.1.7.3 Operate - - - - - - 

3.1.8 A/M32A-60 Generator Set 

3.1.8.1 Inspect - - - - - - 

3.1.8.2 Operate - - - - - - 


3.1.9.1 Inspect - - - - - - 

3.1.9.2 Operate - - - - - - 


* 3.1.10.1 Inspect 1b - - - - - 

* 3.1.10.2 Operate 1b - - - - - 

3.1.11 Hydraulic Test Stand 

3.1.11.1 Inspect - - - - - - 

3.1.11.2 Operate - - - - - - 

3.1.12 TF-1 Floodlight Set 

3.1.12.1 Inspect - - - - - - 

3.1.12.2 Operate - - - - - - 

35 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


3.1.13 FL-1D Floodlight Set 

3.1.13.1 Inspect - - - - - - 

3.1.13.2 Operate - - - - - - 

3.2 Aircraft Familiarization 

TR: TOs 1A-10A-2-1-1, 1A-10A-33- 

1-2, 1A-10C-2-1-1, , 1A-10C-33-1-2, 

1A-10C-40TS-9, AFMAN 91-201 

* 3.2.1 Aircraft Safety Devices B - - - - - 

* 3.2.2 Aircraft Danger Areas B - - - - - 

* 3.2.3 Aircraft Switches, Controls, 

and Indicators 

B - - - - - 

* 3.2.4 Perform Aircraft Safe for 

Maintenance Procedures 

F 3b - - - - - 

* 3.2.5 Apply / Remove External 

Electrical Power 

1b - - - - - 

3.2.6 Aircraft Exterior Panels 

* 3.2.6.1 Remove 1b - - - - - 

* 3.2.6.2 Install 1b - - - - - 

3.3 Gun System 

TR: TOs 1A-10A-2-1-1, 1A-10A-2- 

94JG-6, 1A-10A-2-94JG-7, 1A-10A-2- 

94JG-8, 1A-10A-2-94TS-2, 1A-10A- 

23, 1A-10A-33-1-2, 1A-10C-2-1-1, 

1A-10C-2-94JG-6, 1A-10C-2-94JG-7, 

1A-10C-2-94JG-8, 1A-10C-2-40TS-2, 

1A-10C-23, 1A-10C-33-1-2, 11W1- 

12-10-2, 11W1-7-14-2, 11W1-28-8-2, 

33D5-12-212-1 

* 3.3.1 Nomenclature A - - - - - 

* 3.3.2 Function of Parts A - - - - - 

* 3.3.3 Theory of Operation A - - - - - 

* 3.3.4 Gun System Stoppages (Jam) * A - - - - - 

* 3.3.5 Perform Gun Safing and 

Clearing 

F 3b - - - - - 

3.3.6 Perform Gun System Checks 

* 3.3.6.1 Operational 1b - - - - - 

* 3.3.6.2 Functional 1b - - - - - 

* 3.3.6.3 Electrical 1b - - - - - 

3.3.7 Gun System Compartment 

3.3.7.1 Clean - - - - - - 

3.3.7.2 Inspect - - - - - - 

3.3.8 Gun Support Equipment 

3.3.8.1 Inspect - - - - - - 

3.3.8.2 Use - - - - - - 

3.3.8.3 Maintain - - - - - - 

3.3.9 GAU-8/A Gun 

* 3.3.9.1 Nomenclature B - - - - - 

* 3.3.9.2 Function of Parts B - - - - - 

* 3.3.9.3 Theory of Operation B - - - - - 

* 3.3.9.4 Remove 1b - - - - - 

* 3.3.9.5 Disassemble 1b - - - - - 

* 3.3.9.6 Inspect 1b - - - - - 

3.3.9.7 Repair - - - - - - 

* 3.3.9.8 Assemble 1b - - - - - 

36 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


* 3.3.9.9 Install 1b - - - - - 

3.3.10 Ammunition Drum Assembly 

* 3.3.10.1 Remove 1b - - - - - 

* 3.3.10.2 Disassemble 1b - - - - - 

* 3.3.10.3 Inspect 1b - - - - - 

3.3.10.4 Repair - - - - - - 

* 3.3.10.5 Assemble 1b - - - - - 

* 3.3.10.6 Install 1b - - - - - 

3.3.11 Conveyor Assembly 

* 3.3.11.1 Remove 1b - - - - - 

3.3.11.2 Disassemble - - - - - - 

3.3.11.3 Inspect - - - - - - 

3.3.11.4 Repair - - - - - - 

3.3.11.5 Assemble - - - - - - 

* 3.3.11.6 Install 1b - - - - - 

3.3.12 Gun Barrels 

3.3.12.1 Remove - - - - - - 

3.3.12.2 Inspect - - - - - - 

3.3.12.3 Install - - - - - - 

3.3.13 Hydraulic Drive Assembly 

* 3.3.13.1 Remove 1b - - - - - 

3.3.13.2 Disassemble - - - - - - 

3.3.13.3 Inspect - - - - - - 

3.3.13.4 Repair - - - - - - 

3.3.13.5 Assemble - - - - - - 

* 3.3.13.6 Install 1b - - - - - 

3.3.14 Entrance / Exit Unit 

3.3.14.1 Remove - - - - - - 

3.3.14.2 Disassemble - - - - - - 

3.3.14.3 Inspect - - - - - - 

3.3.14.4 Repair - - - - - - 

3.3.14.5 Assemble - - - - - - 

3.3.14.6 Install - - - - - - 

3.3.15 Turnaround / Transfer Unit 

3.3.15.1 Remove - - - - - - 

3.3.15.2 Disassemble - - - - - - 

3.3.15.3 Inspect - - - - - - 

3.3.15.4 Repair - - - - - - 

3.3.15.5 Assemble - - - - - - 

3.3.15.6 Install - - - - - - 

3.3.16 Access Unit 

* 3.3.16.1 Remove 1b - - - - - 

3.3.16.2 Disassemble - - - - - - 

3.3.16.3 Inspect - - - - - - 

3.3.16.4 Repair - - - - - - 

3.3.16.5 Assemble - - - - - - 

* 3.3.16.6 Install 1b - - - - - 

3.3.17 Tension Equalizer 

3.3.17.1 Remove - - - - - - 

3.3.17.2 Disassemble - - - - - - 

3.3.17.3 Inspect - - - - - - 

37 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


3.3.17.4 Repair - - - - - - 

3.3.17.5 Assemble - - - - - - 

3.3.17.6 Install - - - - - - 

3.3.18 Guide Bar Checking Fixture 

3.3.18.1 Inspect - - - - - - 

3.3.18.2 Operate - - - - - - 

3.3.19 Transfer / Turnaround 

Checking Fixture 

3.3.19.1 Inspect - - - - - - 

3.3.19.2 Operate - - - - - - 

3.3.20 Entrance / Exit Unit Checking 

Fixture 

3.3.20.1 Inspect - - - - - - 

3.3.20.2 Operate - - - - - - 

3.3.21 Conveyor Element Checking 

Fixture 

3.3.21.1 Inspect - - - - - - 

3.3.21.2 Operate - - - - - - 

3.4 Ammunition Loading 

Assembly (ALA) 

TR: TOs 35DA15-7-3, 35D30-4-12-2 



* 3.4.3 Cycle of Operation A - - - - - 

3.4.4 Disassemble - - - - - - 

* 3.4.5 Inspect 1b - - - - - 

3.4.6 Assemble - - - - - - 

3.4.7 Maintain - - - - - - 

* 3.4.8 Use 1b - - - - - 

3.5 Auxiliary Drive Assembly 

3.5.1 Nomenclature - - - - - - 

3.5.2 Theory Of Operation - - - - - - 

3.5.3 Inspect - - - - - - 

3.5.4 Maintain - - - - - - 

3.5.5 Use - - - - - - 

3.6 Stores Suspension Equipment 

TR: TOs 1A-10A-2-94JG Series, 1A- 

10A-6, 1A-10C-2-94JG Series, 1A- 

10C-6, 11B29-3-35-2, 11B29-3-39-2, 

11B29-3-40-2, 11L1-2-10-1, 11L1-2- 

15-1, 11L1-2-29-2, 11L1-3-27-1, 

16W6-28-2, 16W6-28-12, 16W6-28- 

22, 16W6-28-32, 16W6-28-42, 16W6- 

28-52, 35D-1-281 




3.6.4 Pylons 

* 3.6.4.1 Remove 1b - - - - - 

3.6.4.2 Disassemble - - - - - - 

3.6.4.3 Inspect - - - - - - 

3.6.4.4 Repair - - - - - - 

3.6.4.5 Assemble - - - - - - 

38 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


* 3.6.4.6 Install 1b - - - - - 

3.6.5 MAU-40 Bomb Rack 

3.6.5.1 Remove - - - - - - 

* 3.6.5.2 Disassemble B 2b - - - - - 

* 3.6.5.3 Inspect B 2b - - - - - 

3.6.5.4 Repair - - - - - - 

* 3.6.5.5 Assemble B 2b - - - - - 

3.6.5.6 Install - - - - - - 

3.6.5.7 Perform Functional Check with 

Analog Preload Circuit Test 

Set (PN 160D998560-1) 

- - - - - - 

* 3.6.5.8 Perform Functional Check with 

Digital Preload Circuit Test Set 

(PN A10998560-1) 

2b - - - - - 

* 3.6.5.9 Perform Bench Check with 

MAU-12/40/50 Test Set 

2b - - - - - 

* 3.6.5.10 Perform Weight Check with 

Proofload Tester 

1b - - - - - 

3.6.6 MAU-50 Bomb Rack 

* 3.6.6.1 Remove 2b - - - - - 

3.6.6.2 Disassemble - - - - - - 

3.6.6.3 Inspect - - - - - - 

3.6.6.4 Repair - - - - - - 

3.6.6.5 Assemble - - - - - - 

* 3.6.6.6 Install 2b - - - - - 



Set 

- - - - - - 



- - - - - - 

3.6.6.9 Perform Bench Check with 


- - - - - - 

3.6.6.10 Perform Weight Check with 


- - - - - - 

3.6.7 LAU-88 Missile Launcher 

3.6.7.1 Remove - - - - - - 

3.6.7.2 Disassemble - - - - - - 

3.6.7.3 Inspect - - - - - - 

3.6.7.4 Repair - - - - - - 

3.6.7.5 Assemble - - - - - - 

3.6.7.6 Install - - - - - - 


the ARM-136/DSM-157 

- - - - - - 


* 3.6.8.1 Remove 1b - - - - - 

3.6.8.2 Disassemble B - - - - - - 

3.6.8.3 Inspect B - - - - - - 

3.6.8.4 Repair - - - - - - 

3.6.8.5 Assemble B - - - - - - 

* 3.6.8.6 Install 1b - - - - - 


the ARM-136/DSM-157 

- - - - - - 

39 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 



* 3.6.9.1 Remove 1b - - - - - 

* 3.6.9.2 Disassemble 2b - - - - - 

* 3.6.9.3 Inspect 2b - - - - - 

3.6.9.4 Repair - - - - - - 

* 3.6.9.5 Assemble 2b - - - - - 

* 3.6.9.6 Install 1b - - - - - 


the MLS Test Set 

1b - - - - - 


the Control Test Set 

1b - - - - - 

3.6.9.9 Perform Detent Test 1b - - - - - 

3.6.10 Dual Rail Adapter 

* 3.6.10.1 Remove 1b - - - - - 

3.6.10.2 Disassemble - - - - - - 

3.6.10.3 Inspect - - - - - - 

3.6.10.4 Repair - - - - - - 

3.6.10.5 Assemble - - - - - - 

* 3.6.10.6 Install 1b - - - - - 


the Control Test Set 

- - - - - - 

3.6.11 Triple Ejector Rack (TER) 

* 3.6.11.1 Remove 2b - - - - - 

* 3.6.11.2 Disassemble 2b - - - - - 

* 3.6.11.3 Inspect 2b - - - - - 

3.6.11.4 Repair - - - - - - 

* 3.6.11.5 Assemble 2b - - - - - 

* 3.6.11.6 Install 2b - - - - - 



Set 

- - - - - - 



1b - - - - - 


MER / TER / BRU-3 Test Set 

- - - - - - 



- - - - - - 

3.6.12 LAU-131 Rocket Launcher 

* 3.6.12.1 Remove 1b - - - - - 

3.6.12.2 Disassemble - - - - - - 

3.6.12.3 Inspect - - - - - - 

3.6.12.4 Repair - - - - - - 

3.6.12.5 Assemble - - - - - - 

* 3.6.12.6 Install 1b - - - - - 



Set 

- - - - - - 



- - - - - - 


MK-III / MK-IV Test Set / 

Multimeter 

- - - - - - 

40 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


3.6.13 SUU-25 Dispenser 

3.6.13.1 Remove - - - - - - 

3.6.13.2 Install - - - - - - 



Set 

- - - - - - 



- - - - - - 

3.7 Perform Basic Post-Flight 

Inspections 

TR: TO 1A-10A-6, 1A-10C-6 

3.7.1 Gun - - - - - - 

3.7.2 MAU-40 / 50 Bomb Rack - - - - - - 

3.7.3 TER - - - - - - 

3.7.4 LAU-88 Launcher - - - - - - 

3.7.5 LAU-117 Launcher - - - - - - 

3.7.6 LAU-105 Launcher - - - - - - 

3.7.7 LAU-131 Launcher - - - - - - 

3.8 Armament System 

Components 

TR: TOs 8R3-166-2, 11B29-3-35-2, 

11B29-3-39-2, 11B29-3-40-2, 11F13- 

29-7-2, 11L1-2-10-1, 11L1-2-15-1, 

11L1-2-22-1, 11L1-2-29-2, 11L1-3- 

27-1, 11W1-27-7-2, 33D5-12-211-1, 

33D5-12-212-1, 33D5-12-213-1, 

33D5-12-218-1, 33D5-53-13-1, 33D9- 

45-28-1, 33D9-54-62-1, 33D9-61-39- 

1, 1A-10C-2-40TS-7-8-1, 1A-10C-2- 

94JG-7, 1A-10C-2-94JG-10 

3.8.1 Component Functions - - - - - - 

3.8.2 Station Control Units 

3.8.2.1 Remove - - - - - - 

3.8.2.2 Repair - - - - - - 

3.8.2.3 Install - - - - - - 

3.8.2.4 Perform LRU Fault Isolation - - - - - - 

3.8.2.5 Perform LRU Checks using the 

Control Test Set 

- - - - - - 

3.8.3 Digital Data Processing Unit 

* 3.8.3.1 Remove b - - - - - 

3.8.3.2 Repair - - - - - - 

* 3.8.3.3 Install b - - - - - 




- - - - - - 

3.8.4 Gun Electronic Control Unit 

3.8.4.1 Remove - - - - - - 

3.8.4.2 Repair - - - - - - 

3.8.4.3 Install - - - - - - 


3.8.4.5 Perform Electrical Check with 

the A/E24T-138 Test Set 

- - - - - - 

3.8.5 Guided Missile Interface Unit 

3.8.5.1 Remove - - - - - - 

41 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


3.8.5.2 Repair - - - - - - 

3.8.5.3 Install - - - - - - 




- - - - - - 

3.8.6 Armament Relay Box 

3.8.6.1 Remove - - - - - - 

3.8.6.2 Repair - - - - - - 

3.8.6.3 Install - - - - - - 


3.8.7 Armament Circuit Breaker 

Panel 

3.8.7.1 Remove - - - - - - 

3.8.7.2 Install - - - - - - 

3.8.8 Electrical Test Panel 

3.8.8.1 Remove - - - - - - 

3.8.8.2 Install - - - - - - 



- - - - - - 

3.8.9 Central Interface Control Unit 

* 3.8.9.1 Remove b - - - - - 

* 3.8.9.2 Install b - - - - - 

* 3.8.9.3 Perform Operational Checkout 

(BIT) using Portable 

Automated Test Stations 

(PATS) 

1b - - - - - 

3.8.10 1760 Relay Box 

3.8.10.1 Remove - - - - - - 

3.8.10.2 Install - - - - - - 

3.8.10.3 Perform Operational Checkout 

using PATS 

- - - - - - 

3.8.11 Armament HUD Control Panel 

(AHCP) 

3.8.11.1 Remove - - - - - - 

3.8.11.2 Install - - - - - - 


using PATS 

- - - - - - 

3.8.12 Multi-Functional Color 

Display (MFCD) 

3.8.12.1 Remove - - - - - - 

3.8.12.2 Install - - - - - - 


(BIT) 

- - - - - - 

3.8.13 Control Display Unit (CDU) 

3.8.13.1 Operate - - - - - - 

3.8.13.2 Perform Start up BIT - - - - - - 

3.8.14 Hands-On Throttle and Stick 

(HOTAS) 

- - - - - - 

3.8.15 Operational Flight Program 

(OFP) 

3.8.15.1 Upload using PATS - - - - - - 

42 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


3.8.15.2 Remove - - - - - - 


using PATS 

- - - - - - 

3.8.16 Portable Automated Test 

Station (PATS) 

* 3.8.16.1 Perform Maverick Interface 

Station Checkout 

1b - - - - - 

* 3.8.16.2 Perform 1760 Cable Checkout 1b - - - - - 

* 3.8.16.3 Perform Weapons Station 

Checkout 

1b - - - - - 

3.9 Test Equipment 

TR: 33D5-53-1-111, 35D5-12-211-1, 

33D9-45-28-1, 35D9-54-62-1, 33D5- 

12-229-1, 33D5-12-218-1, 33D5-57-3- 

1, 33D5-57-4-1, 33D5-20-31-3, 

11B29-3-35-2, 33D7-50-662-11, 

33D7-50-662-1, 33D9-54-7-42, 33D5- 

53-13-1, 1A-10C-2-40MS-1 

3.9.1 Description - - - - - - 

3.9.2 Familiarization 

* 3.9.2.1 MAU-12 / 40 / 50 Test Set A - - - - - 

* 3.9.2.2 A/E24T-138 Test Set A - - - - - 

3.9.2.3 DSM-157 / ARM136 - - - - - - 

* 3.9.2.4 Control Test Set A - - - - - 

3.9.2.5 Armament Control System 

Interface Test Set 

- - - - - - 

3.9.2.6 MK-III / MK-IV Test Set - - - - - - 

* 3.9.2.7 Missile Launch System Test 

Set (MLSTS) 

A - - - - - 

3.9.2.8 MER / TER / BRU-3 Test Set - - - - - - 

3.9.2.9 Analog Preload Circuit Test 

Set (PN 160D998560-1) 

- - - - - - 

* 3.9.2.10 Digital Preload Circuit Test Set 

(PN A10998560-1) 

A - - - - - 

3.9.2.11 Detent Tester A - - - - - 

* 3.9.2.12 Proofload Tester A - - - - - 

* 3.9.2.13 Portable Automated Test 

Station (PATS) 

A - - - - - 

3.9.3 Inspect 

* 3.9.3.1 MAU-12 / 40 / 50 Test Set 1a - - - - - 

* 3.9.3.2 A/E24T-138 Test Set 1a - - - - - 

3.9.3.3 DSM-157 / ARM136 - - - - - - 

* 3.9.3.4 Control Test Set 1a - - - - - 



- - - - - - 


* 3.9.3.7 Missile Launch System Test 

Set (MLSTS) 

1a - - - - - 



Set 

- - - - - - 

* 3.9.3.10 Digital Preload Circuit Test Set 1a - - - - - 

3.9.3.11 Detent Tester 1a - - - - - 

43 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


* 3.9.3.12 Proofload Tester 1a - - - - - 

* 3.9.3.13 PATS 1a - - - - - 

3.9.4 Maintain 

3.9.4.1 MAU-12 / 40 / 50 Test Set - - - - - - 

3.9.4.2 A/E24T-138 Test Set - - - - - - 

3.9.4.3 DSM-157 / ARM136 - - - - - - 

3.9.4.4 Control Test Set - - - - - - 



- - - - - - 


3.9.4.7 Missile Launch System Test 

Set (MLSTS) 

- - - - - - 



Set 

- - - - - - 

3.9.4.10 Digital Preload Circuit Test Set - - - - - - 

3.9.4.11 Detent Tester - - - - - - 

3.9.4.12 Proofload Tester - - - - - - 

3.9.4.13 PATS - - - - - - 

3.9.5 Repair 

3.9.5.1 MAU-12 / 40 / 50 Test Set - - - - - - 

3.9.5.2 A/E24T-138 Test Set - - - - - - 

3.9.5.3 DSM-157 / ARM136 - - - - - - 

3.9.5.4 Control Test Set - - - - - - 



- - - - - - 


3.9.5.7 Missile Launch System Test 

Set (MLSTS) 

- - - - - - 



Set 

- - - - - - 

3.9.5.10 Digital Preload Circuit Test Set - - - - - - 

3.9.5.11 Detent Tester - - - - - - 


3.9.5.13 PATS - - - - - - 

3.10 Fault Isolation Procedures 

TR: 1A-10-2-94TS-1, 1A-10A-2- 

94TS-2, 1A-10A-2-110-1, 1A-10C-2- 

40TS-7-8-1 

* 3.10.1 Principles of Troubleshooting A - - - - - 

* 3.10.2 Use Fault Isolation Technical 

Orders 

1a - - - - - 

* 3.10.3 Use Schematics / Wiring 

Diagrams 

1a - - - - - 

* 3.10.4 Troubleshoot Circuits 1a - - - - - 

3.10.5 Use Interface Test Set - - - - - - 

3.10.6 Troubleshoot 1760 Weapons 

Stations 

3.10.7 Repair 1760 BUS including 

Data Bus Couplers (DBC) 

- - - - - - 

44 1 January 2012



Tasks 




5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


3.11 Airmunitions (See Matrix) 

TR: TOs 1-1M-33, 1A-10A-6, 1A- 

10A-33-1-2, 1A-10C-6, 1A-10C-33-1- 

2, AFMAN 91-201 

* 3.11.1 Characteristics A - - B - - 

* 3.11.2 Load Nonnuclear F 1b - - - - - 

* 3.11.3 Unload Nonnuclear F 1b - - - - - 

45 1 January 2012

THIS PAGE INTENTIONALLY LEFT BLANK 

46 1 January 2012

B-1 Aircraft 


Tasks 



Knowledge And Technical References A B A B C D E A B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


4 B-1 AIRCRAFT 


TR: TO 1B-1B-2-94GS-00-1, 1B-1B- 

2-94JG-30-3, 11-1-38, 11N-H5083-1, 

11N-H5083-1CL-1, 11N-H5083-2, 

11N-H5089-2, 33D3-2-26-1, 33D3-2- 

27-1, 33D3-2-27-6WC-2, 35A4-2-60- 

1, 35C2-3-469-2, 35D3-9-21-1, 35D3- 

9-29-A, 35D5-3-8-41, 35W3-6-22-1 

* 4.1.1 Description A - - B - - 

4.1.2 Accessories - - - B - - 

4.1.3 MJ-40 Bomb Lift Truck 

* 4.1.3.1 Inspect 1b - - - - - 

* 4.1.3.2 Operate 1b - - - - - 

* 4.1.3.3 Drive 1b - - - - - 

4.1.3.4 Ram Assembly 

* 4.1.3.4.1 Inspect Ram 1b - - - - - 

4.1.3.4.2 Install Ram - - - - - - 

4.1.3.4.3 Remove Ram - - - - - - 


* 4.1.4.1 Inspect 2b - - - - - 

* 4.1.4.2 Operate 2b - - - - - 


* 4.1.5.1 Inspect 1b - - - - - 

* 4.1.5.2 Load / Unload 1b - - - - - 


4.1.6 MHU-196/M Trailer 

* 4.1.6.1 Inspect 2b - - - - - 

* 4.1.6.2 Operate 2b - - - - - 

* 4.1.6.3 Mate / Demate 2b - - - - - 


TR: 36A11-18-3-1, 36A11-18-3-4 

4.1.7.1 Inspect - - - - - - 

4.1.7.2 Maintain - - - - - - 

4.1.8 Split Deck Maintenance 

Platform 

* 4.1.8.1 Inspect 3b - - - - - 

* 4.1.8.2 Operate 3b - - - - - 

4.1.9 Launcher Loader Adapter 

* 4.1.9.1 Inspect 2b - - - - - 

* 4.1.9.2 Operate 2b - - - - - 

4.1.9.3 Maintain - - - - - - 

4.1.10 Launcher / Module Handling 

Adapter 

* 4.1.10.1 Inspect 1b - - - - - 

* 4.1.10.2 Operate 1b - - - - - 

4.1.11 MHU-83 Munitions 

Handling/Loading Lift Truck 

* 4.1.11.1 Inspect 3b - - - - - 

* 4.1.11.2 Operate 3b - - - - - 

* 4.1.11.3 Drive 3b - - - - - 

4.1.12 TR-1 Floodlight Set 

4.1.12.1 Inspect - - - - - - 

47 1 January 2012



Tasks 




C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


4.1.12.2 Operate - - - - - - 


4.1.13.1 Inspect - - - - - - 

4.1.13.2 Operate - - - - - - 

4.1.14 T-Bar Adapter 

4.1.14.1 Inspect - - - - - - 

4.1.14.2 Operate - - - - - - 

4.1.15 EPU-5/E 

4.1.15.1 Inspect - - - - - - 

4.1.15.2 Operate - - - - - - 

4.1.16 EPU-6/E 

4.1.16.1 Inspect - - - - - - 

4.1.16.2 Operate - - - - - - 

4.1.17 Overhead Hoist 

4.1.17.1 Inspect - - - - - - 

4.1.17.2 Operate - - - - - - 

4.1.18 Sling Consolidated Group II 

4.1.18.1 Inspect - - - - - - 

4.1.18.2 Maintain - - - - - - 

4.1.18.3 Sling CBM - - - - - - 

4.1.18.4 Sling MPRL - - - - - - 

4.1.19 MXU-690/E Cooling Control 

Unit 

4.1.19.1 Maintain - - - - - - 

4.1.19.2 Calibrate - - - - - - 

4.1.20 Air Flow Cooling Monitor 

4.1.20.1 Maintain - - - - - - 

4.1.20.2 Calibrate - - - - - - 


TR: TOs 1B-1B-2-05GS-00-1, 1B-1B- 

2-05JG-20-1, 1B-1B-2-46JG-30-1, 

1B-1B-2-94GS-00-Series, 1B-1B-2- 

95JG-00-1, 1B-1B-2-94JG-10-1 



* 4.2.3 Stores Management System A - - - - - 

* 4.2.4 Hardness Critical Procedures 

(HCP) 

A - - - - - 

* 4.2.5 CITS A - - - - - 



F 1b - - - - - 

4.2.7 Remove / Apply Aircraft 

Power / Cooling Air (Non- 

CASS) 

- - - - - - 

4.2.8 Remove / Apply Aircraft 

Power / Cooling Air (CASS) 

- - - - - - 


TR: TOs 1B-1B-2-94JG-30-Series, 

1B-1B-33-2-1, 11B29-3-55-1, 11B29- 

3-56-11, 11B29-3-65-2, 11B29-3-73- 

1, 11N-L5002-Series, 11N-H5083-1, 

11N-H5086-2 

* 4.3.1 Description A - - - - - 

48 1 January 2012



Tasks 




C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 




4.3.4 Sniper Pylon 

TR: TO 1-1b-2-94JG-30-11, 16-W6- 

30-3 

4.3.4.1 Remove - - - - - - 

4.3.4.2 Inspect - - - - - - 

4.3.4.3 Repair - - - - - - 

4.3.4.4 Install - - - - - - 

4.3.5 Conventional Rotary Launcher 

(LAU-144/A -180 Inch) 

* 4.3.5.1 Remove from Aircraft 1b - - - - - 

* 4.3.5.2 Disassemble 1b - - - - - 

* 4.3.5.3 Inspect 1b - - - - - 

4.3.5.4 Repair - - - - - - 

* 4.3.5.5 Assemble 1b - - - - - 

* 4.3.5.6 Install on Aircraft 1b - - - - - 

* 4.3.5.7 Perform Functional Check 

with 750 Test Set 

1b - - - - - 

* 4.3.5.8 Perform End of Firing Day 

Inspection 

3b - - - - - 

* 4.3.5.9 Perform Rotary Launcher 

Weapons/Bay Status Check 

1b - - - - - 

4.3.5.10 Perform 60-Day Flush - - - - - - 

4.3.5.11 Hoist with Consolidated Sling 

Assembly 

- - - - - - 

4.3.6 Conventional Bomb Module 

* 4.3.6.1 Remove from Aircraft 1b - - - - - 

* 4.3.6.2 Disassemble 1b - - - - - 

* 4.3.6.3 Inspect 1b - - - - - 

4.3.6.4 Repair - - - - - - 

* 4.3.6.5 Assemble 1b - - - - - 

* 4.3.6.6 Install on Aircraft 1b - - - - - 

* 4.3.6.7 Perform Functional Check 

with 750 Test Set 

1b - - - - - 

* 4.3.6.8 Perform End of Firing Day 

Inspection 

3b - - - - - 

* 4.3.6.9 Perform Bomb Module 

Weapons/Bay Status Check 

1b - - - - - 

4.3.6.10 Perform 60 Day Flush - - - - - - 

4.3.6.11 Hoist with Consolidated Sling 

Assembly 

- - - - - - 

4.3.7 MAU-12 

4.3.7.1 Remove - - - - - - 

4.3.7.2 Disassemble - - - - - - 

4.3.7.3 Inspect - - - - - - 

4.3.7.4 Repair - - - - - - 

4.3.7.5 Assemble - - - - - - 

4.3.7.6 Install - - - - - - 


MAU-12/40/50 

- - - - - - 

49 1 January 2012



Tasks 




C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 




1b - - - - - 

4.3.8 14 Inch Ejector Rack 

* 4.3.8.1 Remove 2b - - - - - 


* 4.3.8.3 Inspect B 1b - - - - - 

4.3.8.4 Repair - - - - - - 

* 4.3.8.5 Assemble B 1b - - - - - 

* 4.3.8.6 Install 2b - - - - - 

* 4.3.8.7 Perform Functional Check 1b - - - - - 

4.3.9 30 Inch Ejector Rack 

* 4.3.9.1 Remove 2b - - - - - 

4.3.9.2 Disassemble B - - - - - - 

* 4.3.9.3 Inspect B 1b - - - - - 

4.3.9.4 Repair - - - - - - 

4.3.9.5 Assemble B - - - - - - 

* 4.3.9.6 Install 2b - - - - - 


4.3.10 BRU-61 

4.3.10.1 Remove - - - - - - 

4.3.10.2 Disassemble - - - - - - 

4.3.10.3 Inspect - - - - - - 

4.3.10.4 Repair - - - - - - 

4.3.10.5 Assemble - - - - - - 

4.3.10.6 Install - - - - - - 


AN/GYQ-79 Test Set 

- - - - - - 

4.3.10.8 Perform Basic Post Flight 

Inspection 

- - - - - - 

4.4 Stores Management System 

Components 

TR: TOs 1B-1B-33-2-1, 1B-1B-2- 

34JG-60-2, 1B-1B-2-40JG-00-1, 1B- 

1B-2-40JG-94-1, 1B-1B-2-94JG-10-1 

* 4.4.1 Component Functions A - - - - - 

* 4.4.2 Perform Fault Isolation 

Procedures 

1b - - - - - 

4.4.3 Pilot Stores Panel 

* 4.4.3.1 Remove a - - - - - 

* 4.4.3.2 Install a - - - - - 

* 4.4.3.3 Perform Weapons System 

Ground Readiness Check 

1b - - - - - 

4.4.4 Pilot Stores Jettison Panel 

* 4.4.4.1 Remove a - - - - - 

* 4.4.4.2 Install a - - - - - 



1b - - - - - 

4.4.5 Stores Management System 

Panel 

* 4.4.5.1 Remove a - - - - - 

* 4.4.5.2 Install a - - - - - 

50 1 January 2012



Tasks 




C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 




1b - - - - - 

4.4.6 ACU 

4.4.6.1 Load ACU from PCMCIA - - - - - - 

4.4.6.2 Load ACU from DTU - - - - - - 

* 4.4.6.3 Load ACU from MSD 1b - - - - - 

4.5 Weapons Bay 

* 4.5.1 Perform Operational Mode 

Checkout 

1 - - - - - 

* 4.5.2 Perform Fault Isolation 1b - - - - - 

4.6 Weapons Bay Components 

TR: TOs 1B-1B-2-94JG-90-Series 

* 4.6.1 Component Characteristics A - - - - - 

4.6.2 Perform Fault Isolation - - - - - - 

4.6.3 Proximity Switch 

4.6.3.1 Remove - - - - - - 

4.6.3.2 Install - - - - - - 

4.6.3.3 Perform Operational Checkout - - - - - - 

4.6.4 Proximity Switch Electrical 

Package 

4.6.4.1 Remove - - - - - - 

4.6.4.2 Install - - - - - - 


4.6.5 Launcher Drive Electrical 

Controller Assembly 

4.6.5.1 Remove - - - - - - 

4.6.5.2 Install - - - - - - 


4.6.6 Launcher Drive 

* 4.6.6.1 Perform Operational Checkout 1b - - - - - 

4.6.7 Armament Ground Control 

Panel 

4.6.7.1 Remove - - - - - - 

4.6.7.2 Install - - - - - - 


4.7 Weapons Bay Door 

TR: TOs 1B-1B-2-94JG-90 Series 

* 4.7.1 Perform Operational Checkout 1b - - - - - 

* 4.7.2 Operate Manually 2b - - - - - 

* 4.7.3 Operate Electrically 2b - - - - - 

4.8 Chaff / Flare Dispensers 

4.8.1 Maintain Modules - - - - - - 

4.8.2 Perform Functional Check 

with Diode Test Set 

- - - - - - 

4.8.3 Inspect Diode Matrix Unit Test 

Set 

- - - - - - 

4.8.4 Maintain Diode Matrix Unit 

Test Set 

- - - - - - 


TR: TOs 1B-1B-2-94JG-90-Series, 1- 

1M-33, 33D5-53-1-111, 33D5-53-13- 

1, 33D5-53-15-1, 33D7-33-192-1 

4.9.1 Description - - - - - - 

51 1 January 2012



Tasks 




C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 



* 4.9.2.1 Conventional Bomb Module 

A - - - - - 

* 4.9.2.2 

Tester (750A Test Set) 

Junction Box Ejector Rack 

Test Set (JBERTS) 

A - - - - - 

4.9.2.3 RLDS Test Set - - - - - - 

4.9.2.4 Proximity Switch Test Set - - - - - - 

4.9.2.5 Weapons Bay Door / Spoiler 

Test Set 

- - - - - - 

4.9.2.6 AN/GYQ-79 (CMBRE) - - - - - - 


4.9.2.8 MAU-12/40/50 Tester - - - - - - 

4.9.3 Inspect 

* 4.9.3.1 Conventional Bomb Module 


1a - - - - - 

* 4.9.3.2 Junction Box Ejector Rack 


1a - - - - - 

4.9.3.3 RLDS Test Set - - - - - - 

4.9.3.4 Proximity Switch Test Set - - - - - - 

4.9.3.5 Weapons Bay Door / Spoiler 

Test Set 

- - - - - - 

4.9.3.6 AN/GYQ-79 (CMBRE) - - - - - - 


4.9.3.8 MAU-12/40/50 Tester - - - - - - 


4.9.4.1 Conventional Bomb Module 


- - - - - - 

4.9.4.2 Junction Box Ejector Rack 


- - - - - - 

4.9.4.3 AN/GYQ-79 (CMBRE) - - - - - - 


4.9.4.5 MAU-12/40/50 Tester - - - - - - 

4.9.5 Repair 

4.9.5.1 Conventional Bomb Module 


- - - - - - 

4.9.5.2 Junction Box Ejector Rack 


- - - - - - 

4.9.5.3 AN/GYQ-79 (CMBRE) - - - - - - 


4.9.5.5 MAU-12/40/50 Tester - - - - - - 


TR: TOs 1-1M-33, 1B-1B-33-2-1, 1B- 

1B-33-2-1CL-Series 


4.10.2 Conventional Rotary Launcher 

(LAU-144/A) 

* 4.10.2.1 Load F 1b - - - - - 

* 4.10.2.2 Unload F 1b - - - - - 

4.10.3 Conventional Bomb Module 

* 4.10.3.1 Load F 1b - - - - - 

* 4.10.3.2 Unload F 1b - - - - - 

4.10.4 Chaff / Flare Module 

52 1 January 2012



Tasks 




C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


* 4.10.4.1 Load 1b - - - - - 

* 4.10.4.2 Unload 1b - - - - - 

53 1 January 2012



54 1 January 2012

B-2A Aircraft 

1. Tasks 2. Core 

Tasks 

3. Certification for OJT 4. Proficiency Codes Used To Indicate 


Knowledge and Technical References A B A B C D E A 

B 

C 


5 

Level 7 Tng Start Tng Done 

Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) (2) CDC 

Crse 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

5 B-2 AIRCRAFT 


TR: 11A-1-38, 11N-B1004-1, 34Y1- 

87-11, 35C2-3-372-1, 35D3-2-25-1, 

35D3-2-27-1, 35D5-3-8-31, 35E9-90- 

41, 35F5-5-11-1, 35F5-5-15-1, 35E-10- 

34-1, 34E-10-33-1 

5.1.1 Description - - - B - - 



TR: TO 35D3-2-26-1, 35D3-2-27-1, 

35D3-2-27-11, 35D3-2-27-21, 35D3-2- 

27-6WC-1, 11-1-38, 11N-B1004-1 

* 5.1.3.1 Inspect 1b - - - - - 

* 5.1.3.2 Load / Unload 1b - - - - - 


5.1.4 MJ-40 Bomb Lift Truck 

TR: TO 35D3-9-21-1 

5.1.4.1 Inspect - - - - - - 

5.1.4.2 Operate - - - - - - 

5.1.4.3 Drive - - - - - - 

5.1.4.4 Ram Assembly 

5.1.4.4.1 Inspect Ram - - - - - - 

5.1.4.4.2 Install Ram - - - - - - 

5.1.4.4.3 Remove Ram - - - - - - 



TR: TO 35D5-3-8-31 

* 5.1.5.1 Inspect 3b - - - - - 

* 5.1.5.2 Operate 3b - - - - - 

* 5.1.5.3 Drive 3b - - - - - 

5.1.6 MHU-204/M Trailer 

TR: 11N-H5083-1, 11N-H5083-1CL-1 

5.1.6.1 Inspect - - - - - - 

5.1.6.2 Operate - - - - - - 

5.1.6.3 Perform Mate / Demate 

Procedures 

- - - - - - 


TR: 36A11-18-3-1, 36A11-18-3-4 

5.1.7.1 Inspect - - - - - - 

5.1.7.2 Maintain - - - - - - 

5.1.8 Launcher Loader Adapter 

TR: 11N-H5084-2 

* 5.1.8.1 Inspect 2b - - - - - 

* 5.1.8.2 Operate 2b - - - - - 

5.1.8.3 Maintain - - - - - - 


TR: TOs 35C2-3-372-1, 35C2-3-372- 

11, 35C2-3-372-14 

5.1.9.1 Inspect - - - - - - 

5.1.9.2 Operate - - - - - - 


TR: TOs 35C2-3-469-2, 35C2-3-469- 

11, 35C2-3-469-12, 35C2-3-469-14 

* 5.1.10.1 Inspect 3b - - - - - 

55 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) (2) CDC 

Crse 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 5.1.10.2 Operate 3b - - - - - 


5.1.11.1 Inspect - - - - - - 

5.1.11.2 Operate - - - - - - 


TR: TOs 1B-2A-16, 1B-2A-33-2-1, 1B- 

2A-2-01JG-Series, 1B-2A-2-05JG- 

Series, 1B-2A-2-94GS-00-1 

5.2.1 Access Doors and Panels - - - - - - 

5.2.2 Ground Handling and Safety - - - - - - 

5.2.3 Stores Management System - - - - - - 

5.2.4 Nuclear Enable System - - - - - - 

5.2.5 Perform Aircraft Safe for 


F - - - - - - 

5.2.6 Electrically Operate Weapons 

Bay Doors 

- - - - - - 

5.2.7 Remove / Apply Aircraft Power 

/ Cooling Air (Non-CASS) 

- - - - - - 

5.2.8 Remove / Apply Aircraft Power 

/ Cooling Air (CASS) 

- - - - - - 

5.2.9 Perform MMS Command 

Disable System Recode 

Procedures 

- - - - - - 

5.2.10 Install / Remove Maintenance 

Write Cartridge 

- - - - - - 

5.2.11 Interpret On-Board Test Set 

Ground Printer Expanded Data 

- - - - - - 

5.2.12 Operational Flight Program 

(OFP) Reload 

- - - - - - 


TR: TO 1B-2A-6, 1B-2A-16, 1B-2A- 

33-2-1, 1B-2A-2-94JG-30-1, 1B-2A-2- 

94JG-30-2, 11B29-3-70-1, 11B29-3-66- 

1, 11N-L5006-1, 11N-L5006-2, 33D5- 

53-13-1, 11NH5006-1, 11N5006-2, 

11N-H5079-2 

5.3.1 BRU-44 


5.3.1.2 Remove from Rotary Launcher 

Adapter (RLA) 

- - - - - - 

5.3.1.3 Disassemble B - - - - - - 

5.3.1.4 Clean - - - - - - 

5.3.1.5 Inspect 

5.3.1.5.1 After Fire B - - - - - - 

5.3.1.5.2 30 Day / 5 Fire - - - - - - 

5.3.1.5.3 24 Month - - - - - - 

5.3.1.5.4 50 Fire - - - - - - 

5.3.1.6 Repair - - - - - - 

5.3.1.7 Assemble B - - - - - - 

5.3.1.8 Install / Remove SMU-105 and 

Junction Box 

- - - - - - 

5.3.1.9 Install / Remove Adapter 

Fitting 

- - - - - - 

5.3.1.10 Install on RLA - - - - - - 

56 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) (2) CDC 

Crse 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

5.3.1.11 Weight Check with Proofload 

Tester 

- - - - - - 

5.3.1.12 Leak Check - - - - - - 

5.3.1.13 Hook Torque Check - - - - - - 


MAU-12 / 40 / 50 Test Set 

- - - - - - 


Common Organizational Level 

Tester (COLT) 

- - - - - - 

5.3.1.16 Perform on Aircraft Functional 

Check 

- - - - - - 

5.3.3 Smart Bomb Rack Assembly 

(SBRA) 

5.3.3.1 Remove from Aircraft - - - - - - 

5.3.3.2 Disassemble - - - - - - 

5.3.3.3 Inspect - - - - - - 

5.3.3.4 Repair - - - - - - 

5.3.3.5 Assemble - - - - - - 

5.3.3.6 Off Equipment Reconfiguration - - - - - - 

5.3.3.7 On Equipment Reconfiguration - - - - - - 

5.3.3.8 Install on Aircraft - - - - - - 


with COLT 

- - - - - - 

5.3.3.10 Perform Functional Check - - - - - - 

5.3.3.11 Use Storage and Transport 

Pallet 

- - - - - - 

5.3.3.12 Bomb Release Controller 

5.3.3.12.1 Perform Operational Check - - - - - - 

5.3.3.12.2 Remove from SBRA - - - - - - 

5.3.3.12.3 Install on SBRA - - - - - - 

5.3.4 Rotary Launcher Adapter 

(RLA) 

5.3.4.1 Install / Remove from Aircraft 

using MHU-204 Trailer 

- - - - - - 

5.3.4.2 Install / Remove from Aircraft 

using I & R Adapter with Lift 

Truck 

- - - - - - 

5.3.4.3 Install / Remove to / from 

Suspended Loading and 

Checkout Frame using MHU- 

204 Trailer 

- - - - - - 

5.3.4.4 Reconfigure - - - - - - 

5.3.4.5 Inspect - - - - - - 

5.3.4.6 Perform Postload Functional 

Checks 

- - - - - - 


with COLT 

- - - - - - 

5.3.4.8 Perform Manual RLA Rotation - - - - - - 

5.3.4.9 Perform Manual RLA Rotation 

in Frame 

- - - - - - 

5.3.4.10 Rack Configurations - - - - - - 

57 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) (2) CDC 

Crse 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

5.3.4.11 Install / Remove Nuclear 

Weapons Interface Unit/Control 

- - - - - - 

5.3.4.12 

Unit 

Install / Remove Missile Status 

Relay Assembly 

- - - - - - 

5.3.4.13 Install / Remove Transformer 

Rectifier Unit 

- - - - - - 

5.3.4.14 Install / Remove Bomb Status 

Relay Assembly 

- - - - - - 

5.3.4.15 Install / Remove Ejector Relay - - - - - - 

5.4 Install / Remove Stores 

Management System 

Components 

TR: TO 1B-2A-2-94JG-10-1, 11N- 

C5062-2 

5.4.1 Stores Management Processor - - - - - - 

5.4.2 Ground Control Panel - - - - - - 

5.4.3 Consent / Arm Panel - - - - - - 

5.4.4 Jettison Enable Panel - - - - - - 

5.4.5 Manual Weapons Release Panel - - - - - - 

5.4.6 Weapons Door Safe Lock 

Control 

- - - - - - 

5.5 Weapons Suspension System 

TR: TOs 11LA14-4-2, 0-4-6-2, 1B-2A- 

2-94JG Series 

5.5.1 System Operational Checkout - - - - - - 

5.5.2 Hydraulic Switching Valve 

5.5.2.1 Remove - - - - - - 

5.5.2.2 Install - - - - - - 

5.5.3 Forward Clip-In Fitting 

5.5.3.1 Remove - - - - - - 

5.5.3.2 Install - - - - - - 

5.5.3.3 PDU Manual Drive / Flex Shaft 

5.5.3.3.1 Remove - - - - - - 

5.5.3.3.2 Install - - - - - - 

5.5.3.3.3 Inspect / Lubricate - - - - - - 

5.5.4 Aft Clip-In Fitting 

5.5.4.1 Remove - - - - - - 

5.5.4.2 Install - - - - - - 

5.5.4.3 Adjust - - - - - - 

5.5.5 Forward RLA Torque Limiters 

5.5.5.1 Remove - - - - - - 

5.5.5.2 Install - - - - - - 

5.5.6 Aft RLA Torque Limiters 

5.5.6.1 Remove - - - - - - 

5.5.6.2 Install - - - - - - 

5.6 Ground Control Panel 

TR: TO 1B-2A-2-94JG-10-1, 11N- 

C5062-2 

5.6.1 Disassemble - - - - - - 

5.6.2 Inspect - - - - - - 

5.6.3 Repair - - - - - - 

5.6.4 Assemble - - - - - - 

58 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) (2) CDC 

Crse 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

5.6.5 Perform Prefunctional 

Continuity and Isolation Check 

- - - - - - 

5.6.6 Perform Functional Check - - - - - - 


TR: TOs 11B29-3-70-8-1, 11B29-3-72- 

8-1, 11N-L-5008-1, 31S5-4-3682-1, 

33A39-71-1, 33D5-12-243-1, 33D7-77- 

83-1, 33K6-4-433-1, 35D5-53-13-1 

5.7.1 Description - - - - - - 



5.7.2.2 Bonding Meter T477W - - - - - - 

5.7.2.3 Stores Management System 

Test Set 

- - - - - - 

5.7.2.4 MAU-12 / 40 / 50 Test Set - - - - - - 

5.7.2.5 Tension Resistance Meter - - - - - - 

5.7.2.6 Common Organizational Level 

Tester (COLT) 

- - - - - - 

5.7.2.7 TTU-584/E (COLT) Accessory 

Kit 

- - - - - - 

5.7.2.8 B-2 Test Programmable Set 

(TPS) 

- - - - - - 

5.7.3 Inspect 



5.7.3.3 and 4 


Test Set 

- - - - - - 

5.7.3.6 MAU-12 / 40 / 50 Test Set - - - - - - 



Tester (COLT) 

- - - - - - 


Kit 

- - - - - - 


(TPS) 

- - - - - - 





Test Set 

- - - - - - 

5.7.4.4 MAU-12 / 40 / 50 Test Set - - - - - - 



Tester (COLT) 

- - - - - - 


Kit 

- - - - - - 


(TPS) 

- - - - - - 

5.7.5 Repair 



59 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) (2) CDC 

Crse 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 


Test Set 

- - - - - - 

5.7.5.4 MAU-12 / 40 / 50 Test Set - - - - - - 



Tester (COLT) 

- - - - - - 


Kit 

- - - - - - 


(TPS) 

- - - - - - 

5.8 Support Equipment 

TR: TOs 11B29-3-66-1, 11N-C5062- 2, 

35D-2-2, AFOSH STD 91-46 

5.8.1 Inspect 

5.8.1.1 Bomb Rack Stanchion / 

Transverse Beam / Interface 

Unit Sling 

- - - - - - 

5.8.1.2 Bomb Rack Assembly Aircraft 

Maintenance Sling 

- - - - - - 

5.8.1.3 Bomb Rack Assembly 

Maintenance Stand 

- - - - - - 

5.8.1.4 Empty Bomb Rack Storage and 

Transport Pallet 

- - - - - - 

5.8.1.5 Power Supply - - - - - - 

5.8.1.6 Adapter Cable Breakout Box - - - - - - 

5.8.1.7 Trestle Hoist - - - - - - 

5.8.1.8 I & R Adapter - - - - - - 

5.8.2 Use 

5.8.2.1 Bomb Rack Stanchion / 

Transverse Beam / Interface 

Unit Sling 

- - - - - - 

5.8.2.2 Bomb Rack Assembly Aircraft 

Maintenance Sling 

- - - - - - 

5.8.2.3 Bomb Rack Assembly 

Maintenance Stand 

- - - - - - 

5.8.2.4 Empty Bomb Rack Storage and 

Transport Pallet 

- - - - - - 

5.8.2.5 Power Supply - - - - - - 

5.8.2.6 Adapter Cable Breakout Box - - - - - - 

5.8.2.7 Trestle Hoist - - - - - - 

5.8.2.8 I & R Adapter - - - - - - 


TR: TOs 1-1M-33, 1B-2A-16, 1B-2A- 

16CL-1, 1B-2A-16CL-2, 1B-2A-33-2- 

1, 1B-2A-33-2-1CL-1, 1B-2A-33-2- 

1CL-2 


5.9.2 Nonnuclear 

5.9.2.1 Load F - - - - - - 

5.9.2.2 Unload F - - - - - - 

5.9.3 Nuclear 

5.9.3.1 Load - - - - - - 

5.9.3.2 Unload - - - - - - 

60 1 January 2012


61 1 January 2012

B-52H Aircraft 

1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate 


Knowledge and Technical References A B A B 

5 Level 7 Level Tng Start Tng Done 

C 

Trainee 

D 

Trainer 

E A B C 


Certifier (1) (2) (1) (2) (1) (2) 


6 B-52H AIRCRAFT 

6.1 Aerospace Ground 

Equipment 

TR: TO 11N-B1004-1, 11-1-38, 

35D3-2-25-1, 35D3-11-36WC-2, 

35D5-3-8-31, 35D3-2-27-1, 35D3- 

2-27-11, 35D3-2-27-21, 35D3-2- 

27-6WC-1, 35D3-2-27-6WC-2, 

11N-H5015A-2, 11N-H5083-2, 

11N-H5083-2-1, 11N-H5083-1CL- 

1, 35C2-3-372-1, 35C2-3-372-11, 

35C2-3-372-14, 35C2-3-469-2, 

35C2-3-469-11, 35C2-3-469-12, 

35C2-3-469-14, 35E9-11-71, 

35F5-5-11-31, 35F5-5-16-1, 1B- 

52H-2-38JG-1, 1B-52H-16, 

35D12-2-14-1 



6.1.3 MJ-1 Aerial Stores Lift 

Truck 

* 6.1.3.1 Inspect 1b - - - - - 

* 6.1.3.2 Operate 1b - - - - - 

* 6.1.3.3 Drive 1b - - - - - 

6.1.4 MHU-83 Munitions 

Handling / Loading Lift 

Truck 

* 6.1.4.1 Inspect 3b - - - - - 

* 6.1.4.2 Operate 3b - - - - - 

* 6.1.4.3 Drive 3b - - - - - 


* 6.1.5.1 Inspect 1b - - - - - 

* 6.1.5.2 Load / Unload 1b - - - - - 


6.1.6 MHU-196/204 Trailer 

* 6.1.6.1 Inspect 2b - - - - - 

* 6.1.6.2 Operate 2b - - - - - 

* 6.1.6.3 Mate / Demate 2b - - - - - 


TR: 36A11-18-3-1, 36A11-18-3-4 

6.1.7.1 Inspect - - - - - - 

6.1.7.2 Maintain - - - - - - 

6.1.8 Launcher Loading Adapter 

TR: 11N-H5084-2 

* 6.1.8.1 Inspect 2b - - - - - 

* 6.1.8.2 Operate 2b - - - - - 


6.1.9.1 Inspect - - - - - - 

6.1.9.2 Operate - - - - - - 


* 6.1.10.1 Inspect 3b - - - - - 

* 6.1.10.2 Operate 3b - - - - - 


6.1.11.1 Inspect - - - - - - 

6.1.11.2 Operate - - - - - - 

62 1 January 2012






C 

Trainee 

D 

Trainer 

E A B C 


Certifier (1) (2) (1) (2) (1) (2) 



6.1.12.1 Inspect - - - - - - 

6.1.12.2 Operate - - - - - - 

6.1.13 MA-3(D) Air Conditioning 

Unit 

* 6.1.13.1 Inspect 1b - - - - - 

* 6.1.13.2 Operate 1b - - - - - 

6.1.14 Nitrogen Servicing Cart 

6.1.14.1 Inspect - - - - - - 

6.1.14.2 Operate - - - - - - 

6.1.15 A/M32A-95 Gas Turbine 

Compressor 

* 6.1.15.1 Inspect 3b - - - - - 

* 6.1.15.2 Operate 3b - - - - - 


TR: TOs 1B-52H-16, 1B-52H-33-2- 

1, 1B-52H-2-31GA-1, 1B-52H-2- 

38GA-1, 1B-52H-2-38JG Series, 

1B-52H-2-2JG-(), 1B-52H-6, 

11B29-3-22-2, 11B29-3-25-2 





A - - - - - 



F 3b - - - - - 

* 6.2.5 Apply / Remove Main 

External Electrical Power 

3b - - - - - 

* 6.2.6 Open / Close Bomb Bay 

Doors 

1b - - - - - 

6.2.7 Perform Basic Post-Flight 

Inspections 

* 6.2.7.1 MAU-12 Bomb Rack 3b - - - - - 

* 6.2.7.2 Cluster Bomb Rack 1b - - - - - 

6.3 Stores Suspension 

Equipment 

* 6.3.1 Description A - - - - - 



6.3.4 ICSMS Pylon Assembly 

TR: TOs 1B-52H-2-31JG-Series, 

16W6-47-2 

* 6.3.4.1 Remove 2b - - - - - 

6.3.4.2 Disassemble - - - - - - 

* 6.3.4.3 Inspect 1b - - - - - 

6.3.4.4 Repair - - - - - - 

6.3.4.5 Assemble - - - - - - 

* 6.3.4.6 Install 2b - - - - - 

6.3.5 Heavy Stores Adapter Beam 


11B29-3-52-2, 16W6-47-2 

6.3.5.1 Remove - - - - - - 

6.3.5.2 Disassemble - - - - - - 

6.3.5.3 Inspect - - - - - - 

63 1 January 2012






C 

Trainee 

D 

Trainer 

E A B C 


Certifier (1) (2) (1) (2) (1) (2) 


6.3.5.4 Repair - - - - - - 

6.3.5.5 Assemble - - - - - - 

6.3.5.6 Install - - - - - - 

6.3.6 Cluster Bomb Rack 

TR: TOs 1B-52H-2-31JG Series, 

11B29-3-21-2, 11B38-2-5-1 

* 6.3.6.1 Remove 2b - - - - - 

* 6.3.6.2 Inspect 2b - - - - - 

* 6.3.6.3 Install 2b - - - - - 

6.3.7 A-6 Bomb Release Unit 

TR: TOs 11B29-3-21-2, 11B38-2- 

5-1 

* 6.3.7.1 Remove 3b - - - - - 

* 6.3.7.2 Inspect 3b - - - - - 

* 6.3.7.3 Install 3b - - - - - 

6.3.8 B-11 Bomb Shackle 

TR: TO 11B40-2-4-3 

* 6.3.8.1 Disassemble 2b - - - - - 

* 6.3.8.2 Inspect 2b - - - - - 

* 6.3.8.3 Assemble 2b - - - - - 

6.3.9 CSRL Yokes 


11B29-3-52-2 

* 6.3.9.1 Remove 2b - - - - - 

6.3.9.2 Disassemble - - - - - - 

* 6.3.9.3 Inspect 1b - - - - - 

6.3.9.4 Repair - - - - - - 

6.3.9.5 Assemble - - - - - - 

* 6.3.9.6 Install 2b - - - - - 

6.3.9.7 Hydraulic Power Supply 

TR: 33D2-5-81-1 

6.3.9.7.1 Inspect - - - - - - 

6.3.9.7.2 Operate - - - - - - 

6.3.9.7.3 Maintain - - - - - - 

6.3.9.8 PDU to/from Yoke 

Assembly 

TR: 11B29-3-52-2 

6.3.9.8.1 Remove - - - - - - 

6.3.9.8.2 Inspect - - - - - - 

6.3.9.8.3 Install - - - - - - 

6.3.10 CSRL (Empty) 


1B-52H-16, 11B29-3-25-2 

* 6.3.10.1 Remove 1b - - - - - 

6.3.10.2 Inspect - - - - - 

* 6.3.10.3 Install 1b - - - - - 

6.3.11 MAU-12 


11B29-3-25-2, 16W6-47-2, 35D5- 

53-13-1 

* 6.3.11.1 Remove from Heavy Stores 

Adapter Beam 

2b - - - - - 


* 6.3.11.3 Inspect B 2b - - - - - 

64 1 January 2012






C 

Trainee 

D 

Trainer 

E A B C 


Certifier (1) (2) (1) (2) (1) (2) 


6.3.11.4 Repair - - - - - - 

* 6.3.11.5 Assemble B 2b - - - - - 

* 6.3.11.6 Install on Heavy Stores 

Adapter Beam 

2b - - - - - 



2b - - - - - 



2b - - - - - 

* 6.4 Pylon Wing Adapter 

(PWA) 

TR: TOs 1B-52H-2-31-GA-1, 1B- 

52H-2-31JG-Series 

1b - - - - - 

6.4.1 Perform Operational Check 

TR: 

6.5 Maintain System Explosive 

Devices 

TR: TOs 1B-52H-2-31JG-Series 

6.5.1 Pressure-Actuated Explosive 

Devices (PAED) 

6.5.1.1 Install - - - - - - 

6.5.1.2 Remove - - - - - - 

6.5.2 Electro-Explosive Devices 

(EED) 

6.5.2.1 Install - - - - - - 

6.5.2.2 Remove - - - - - - 

6.5.3 Shielded-Mild Detonating 

Cord (SMDC) 

6.5.3.1 Install - - - - - - 

6.5.3.2 Remove - - - - - - 

6.5.4 Gas Grain Generators 

(GGG) 

6.5.4.1 Install - - - - - - 

6.5.4.2 Remove - - - - - - 


Components 


1B-52H-2-38JG-Series 

6.6.1 Component Functions - - - - - - 

6.6.2 Digital Bomb Release 

Interval Control (D-BRIC) 

TR: 33D7-50-1913-1 

* 6.6.2.1 Remove 1b - - - - - 

6.6.2.2 Inspect - - - - - - 

* 6.6.2.3 Install 1b - - - - - 

6.6.2.4 Perform Operational Check - - - - - - 

6.6.2.5 Operate - - - - - - 

6.6.3 Weapons Control Panel 

6.6.3.1 Remove - - - - - - 

6.6.3.2 Install - - - - - - 

6.6.4 Missile Consent Panel 

6.6.4.1 Remove - - - - - - 

6.6.4.2 Install - - - - - - 

65 1 January 2012






C 

Trainee 

D 

Trainer 

E A B C 


Certifier (1) (2) (1) (2) (1) (2) 


6.6.5 Conventional Weapons 

Control Panel 

6.6.5.1 Remove - - - - - - 

6.6.5.2 Install - - - - - - 

6.6.6 Jettison Time Delay Relay 

Panel 

6.6.6.1 Remove - - - - - - 

6.6.6.2 Install - - - - - - 

6.6.7 Conventional Weapons 

Relay Panel 

6.6.7.1 Remove - - - - - - 

6.6.7.2 Inspect - - - - - - 

6.6.7.3 Repair - - - - - - 

6.6.7.4 Install - - - - - - 


6.6.7.6 Operate - - - - - - 

* 6.7 Coded Switch System 

TR: TO 11N-T5059-2, 1B-52H-2- 

31GA-1 

B - - - - - 

6.8 Perform Weapons System 

Operational Checks 

TR: TOs 1B-52H-2-31GA-1, 1B- 

52H-2-31JG-Series, 1B-52H-2- 

38JG-Series, 1B-52H-16CL-Series, 

16W6-47-2 

* 6.8.1 Ground Maintenance 

Computer Program 

1b - - - - - 

6.8.2 Pylon Jettison Relay Check - - - - - - 

* 6.8.3 MIT GO/NO-GO 1b - - - - - 

6.8.4 System Interface Test - - - - - - 

6.8.5 Conventional 

* 6.8.5.1 Internal Nonnuclear Release 

System Check 

1b - - - - - 

* 6.8.5.2 External Nonnuclear 

Release Check 

1b - - - - - 

* 6.8.5.3 ICSMS at Wing Disconnect 1b - - - - - 

* 6.8.5.4 ICSMS Pylon Functional 

Check 

1b - - - - - 

6.8.6 Nuclear 

6.8.6.1 Internal - - - - - - 

* 6.8.6.2 External 1b - - - - - 

6.9 Troubleshooting Procedures 

TR: TOs 1B-52H-2-31GA-1, 1B- 

52H-2-38-GA-1 

- 

* 6.9.1 Principles of 

Troubleshooting 

A - - - - - 

* 6.9.2 Use Troubleshooting Tables 1a - - - - - 

66 1 January 2012






C 

Trainee 

D 

Trainer 

E A B C 


Certifier (1) (2) (1) (2) (1) (2) 


* 6.9.3 Isolate Fault 1a - - - - - 


TR: TOs 11N-T5149-2-1, 11N- 

T5149-4, 11N-T5149-8, 33D5-30- 

6-1, 33D7-38-127-1, 33D7-38-127- 

4, 33D2-5-81-1, 35D5-30-9-1, 

35D5-30-9-4 

6.10.1 Description - - - - - - 


* 6.10.2.1 Multi Use Systems Tester – 

Armament Next Generation 

A - - - - - 

(MUSTANG) 


* 6.10.2.3 MAU-12/40/50 A - - - - - 

6.10.3 Inspect 

* 6.10.3.1 MUSTANG 1a - - - - - 


* 6.10.3.3 MAU-12/40/50 1a - - - - - 


6.10.4.1 MUSTANG - - - - - - 


6.10.4.3 MAU-12/40/50 - - - - - - 

6.10.5 Repair 

6.10.5.1 MUSTANG - - - - - - 


6.10.5.3 MAU-12/40/50 - - - - - - 


6.11.1 T-128 Power Supply 

TR: 11N-T-5189-2 

6.11.1.1 Inspect - - - - - - 

6.11.1.2 Maintain - - - - - - 

6.11.2 K4000 Power Supply 

TR: 35C2-2-32-41 

6.11.2.1 Inspect - - - - - - 

6.11.2.2 Maintain - - - - - - 

6.11.3 Pylon Lift Beam 

TR: 11B29-3-52-2 

6.11.3.1 Inspect - - - - - - 

6.11.3.2 Maintain - - - - - - 


TR: TOs 1-1M-33, 1B-52H-16, 1B- 

52H-16CL-Series, 1B-52H-33-2-1, 

1B-52H-33-2-2, 1B-52H-33-2- 

1CL-Series, 1B-52H-33-2-2CL- 

Series 



* 6.12.2.1 Load F 1b - - - - - 

67 1 January 2012






C 

Trainee 

D 

Trainer 

E A B C 


Certifier (1) (2) (1) (2) (1) (2) 


* 6.12.2.2 Unload F 1b - - - - - 

6.12.3 Nuclear 

* 6.12.3.1 Load 1b - - - - - 

* 6.12.3.2 Unload 1b - - - - - 

68 1 January 2012

THIS PAGE INTENTIOANLLY LEFT BLANK 


69 1 January 2012

F-15 Aircraft 


Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


7 F-15 AIRCRAFT 


TR: TOs 1-1A-15, 11-1-38, 11N- 

B1004-1, 34Y1-87-11, 35C2-3-372-1, 

35D3-2-25-1, 35D3-2-27-1, 35D3-9- 

23-1, 35D5-3-8-31, 35DA3-6-37-1, 

35E9-90-41 



* 7.1.2.1 Inspect 3b - - - - - 

* 7.1.2.2 Operate 3b - - - - - 

* 7.1.2.3 Drive 3b - - - - - 



* 7.1.3.1 Inspect 1b - - - - - 

* 7.1.3.2 Operate 1b - - - - - 

* 7.1.3.3 Drive 1b - - - - - 


* 7.1.4.1 Inspect 2b - - - - - 

* 7.1.4.2 Operate 2b - - - - - 


7.1.5.1 Inspect - - - - - - 

7.1.5.2 Operate - - - - - - 


7.1.6.1 Inspect - - - - - - 

7.1.6.2 Operate - - - - - - 

7.1.7 A/M32C-10 Air Conditioner 

* 7.1.7.1 Inspect 2b - - - - - 

* 7.1.7.2 Operate 2b - - - - - 


* 7.1.8.1 Inspect 1b - - B - - 

* 7.1.8.2 Load / Unload 1b - - - - - 



TR: 36A11-18-3-1, 36A11-18-3-4 

7.1.9.1 Inspect - - - - - - 

7.1.9.2 Maintain - - - - - - 


7.1.10.1 Inspect - - - - - - 

7.1.10.2 Operate - - - - - - 


7.1.11.1 Inspect - - - - - - 

7.1.11.2 Operate - - - - - - 



* 7.1.12.1 Inspect 1b - - - - - 

7.1.12.2 Maintain - - - - - - 

* 7.1.12.3 Operate 1b - - - - - 


TR: TOs 1F-15()-2-00GV-00-1, 1F- 

15()-2-05JG-00-1, 1F-15()-2-05JG-10- 

1, 1F-15()-2-94GS-00-1, 1F-15()-33-1- 

2, 1F-15E-16 

70 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 




B - - - - - 





F 3b - - - - - 

* 7.2.5 Apply / Remove Aircraft 


2b - - - - - 


TR: TOs 1F-15()-2-94JG-50-Series, 

1F-15()-2-94JG-73-1, 1F-15()-33-1-2, 

11W1-7-15-2, 11W1-7-17-2, 11W1-7- 

17-4, 11W1-12-4-32, 33D5-3-46-1, 

33D5-3-50-1, 33D5-12-209-1, 33D5- 

12-231-1, 33D5-16-72-1, 35C2-3-372- 

11, 35E9-90-11 

* 7.3.1 Nomenclature B - - - - - 

* 7.3.2 Function of Parts B - - - - - 

* 7.3.3 Theory of Operation B - - - - - 

* 7.3.4 Perform Safing and Clearing 

Procedures 

F 3b - - - - - 

* 7.3.5 Malfunctions / Jams * A - - - - - 

* 7.3.6 Perform Functional Check with 

A/E24T-171 / 199 Test Set 

2b - - - - - 

* 7.3.7 Perform Operational Check 

with A/E24T-169 / 198 Tester 

2b - - - - - 

7.3.8 Boresight - - - - - - 

7.3.9 M61A1 Gun 



* 7.3.9.3 Cycle of Operation B - - - - - 

* 7.3.9.4 Remove 2b - - - - - 

* 7.3.9.5 Disassemble 2b - - - - - 

* 7.3.9.6 Inspect 1b - - - - - 

7.3.9.7 Repair - - - - - - 

* 7.3.9.8 Assemble 2b - - - - - 

* 7.3.9.9 Install 2b - - - - - 

* 7.3.9.10 Perform Performance In-Shop 

Check 

2b - - - - - 

7.3.10 Gun Handling Adapter 

* 7.3.10.1 Inspect 1b - - - - - 

* 7.3.10.2 Use 1b - - - - - 

7.3.10.3 Maintain - - - - - - 

7.3.11 Drum Assembly 

* 7.3.11.1 Remove 2b - - - - - 

7.3.11.2 Disassemble - - - - - - 

7.3.11.3 Inspect - - - - - - 

7.3.11.4 Repair - - - - - - 

7.3.11.5 Assemble - - - - - - 

* 7.3.11.6 Install 2b - - - - - 

7.3.12 Container Assembly 

* 7.3.12.1 Remove 2b - - - - - 

7.3.12.2 Disassemble - - - - - - 

71 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


7.3.12.3 Inspect - - - - - - 

7.3.12.4 Repair - - - - - - 

7.3.12.5 Assemble - - - - - - 

* 7.3.12.6 Install 2b - - - - - 

7.3.13 Conveyor Assembly 

* 7.3.13.1 Remove 2b - - - - - 

7.3.13.2 Disassemble - - - - - - 

7.3.13.3 Inspect - - - - - - 

7.3.13.4 Repair - - - - - - 

7.3.13.5 Assemble - - - - - - 

* 7.3.13.6 Install 2b - - - - - 

7.3.14 Ammunition Drum / Container 

Support Equipment 

* 7.3.14.1 Inspect 1b - - - - - 

* 7.3.14.2 Use 1b - - - - - 

7.3.14.3 Maintain - - - - - - 

7.3.15 Flow Regulator 

7.3.15.1 Remove - - - - - - 

7.3.15.2 Install - - - - - - 

7.3.16 Gear Box Assembly 

7.3.16.1 Remove - - - - - - 

7.3.16.2 Inspect - - - - - - 

7.3.16.3 Install - - - - - - 

7.3.17 Hydraulic Drive Motor 

7.3.17.1 Remove - - - - - - 

7.3.17.2 Inspect - - - - - - 

7.3.17.3 Install - - - - - - 

7.3.18 Rounds Limiter and Totalizer 

7.3.18.1 Remove - - - - - - 

7.3.18.2 Install - - - - - - 

7.3.19 Main Drive Assembly 

7.3.19.1 Remove - - - - - - 

7.3.19.2 Inspect - - - - - - 

7.3.19.3 Install - - - - - - 

7.3.20 Unload Drive Gearbox 

7.3.20.1 Remove - - - - - - 

7.3.20.2 Inspect - - - - - - 

7.3.20.3 Install - - - - - - 

7.3.21 Drive Shaft Assembly 

7.3.21.1 Remove - - - - - - 

7.3.21.2 Inspect - - - - - - 

7.3.21.3 Install - - - - - - 


Fixture 

7.3.22.1 Inspect - - - - - - 

7.3.22.2 Operate - - - - - - 

7.3.23 Transfer Unit Checking Fixture 

7.3.23.1 Inspect - - - - - - 

7.3.23.2 Operate - - - - - - 

7.3.24 Entrance / Exit Unit Checking 

Fixture 

72 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


7.3.24.1 Inspect - - - - - - 

7.3.24.2 Operate - - - - - - 

7.3.25 Handoff Unit Checking Fixture 

(F-15A-D) 

7.3.25.1 Inspect - - - - - - 

7.3.25.2 Operate - - - - - - 

7.3.26 Handoff Unit Checking Fixture 

(F-15E) 

7.3.26.1 Inspect - - - - - - 

7.3.26.2 Operate - - - - - - 

7.3.27 Feed Unit Checking Fixture 

7.3.27.1 Inspect - - - - - - 

7.3.27.2 Operate - - - - - - 

7.3.28 Unload Unit Checking Fixture 

7.3.28.1 Inspect - - - - - - 

7.3.28.2 Operate - - - - - - 

7.4 Ammunition Loading Systems 

TR: TOs 35D30-4-11-1, 35D30-4-15- 

1, 35D30-4-15-4, 35D30-4-16-1, 

35D2-19-1 



* 7.4.3 Use UALS / LALS 2b - - - - - 

7.4.4 Universal Ammunition 

Loading System (UALS) 

7.4.4.1 Drum 

7.4.4.1.1 Remove - - - - - - 

7.4.4.1.2 Disassemble - - - - - - 

7.4.4.1.3 Inspect - - - - - - 

7.4.4.1.4 Repair - - - - - - 

7.4.4.1.5 Assemble - - - - - - 

7.4.4.1.6 Install - - - - - - 

7.4.4.2 Conveyor / Assembly 

7.4.4.2.1 Remove - - - - - - 

7.4.4.2.2 Disassemble - - - - - - 

7.4.4.2.3 Inspect - - - - - - 

7.4.4.2.4 Repair - - - - - - 

7.4.4.2.5 Assemble - - - - - - 

7.4.4.2.6 Install - - - - - - 

7.4.4.3 Interface Unit 

7.4.4.3.1 Remove - - - - - - 

7.4.4.3.2 Disassemble - - - - - - 

7.4.4.3.3 Inspect - - - - - - 

7.4.4.3.4 Repair - - - - - - 

7.4.4.3.5 Assemble - - - - - - 

7.4.4.3.6 Install - - - - - - 

7.4.4.4 UALS Interface Unit Checking 

Fixture 

7.4.4.4.1 Inspect - - - - - - 

7.4.4.4.2 Operate - - - - - - 

7.4.4.5 UALS Entrance / Exit Unit 


73 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


7.4.4.5.1 Inspect - - - - - - 

7.4.4.5.2 Operate - - - - - - 

7.4.4.6 Conveyor Element Checking 

Fixture 

7.4.4.6.1 Inspect - - - - - - 

7.4.4.6.2 Operate - - - - - - 

7.4.5 Linkless Ammunition Loading 

System (LALS) 

7.4.5.1 Storage Container 

7.4.5.1.1 Remove - - - - - - 

7.4.5.1.2 Disassemble - - - - - - 

7.4.5.1.3 Inspect - - - - - - 

7.4.5.1.4 Repair - - - - - - 

7.4.5.1.5 Assemble - - - - - - 

7.4.5.1.6 Install - - - - - - 


7.4.5.2.1 Remove - - - - - - 

7.4.5.2.2 Disassemble - - - - - - 

7.4.5.2.3 Inspect - - - - - - 

7.4.5.2.4 Repair - - - - - - 

7.4.5.2.5 Assemble - - - - - - 

7.4.5.2.6 Install - - - - - - 

7.4.5.3 Universal Aircraft Interface 

Unit 

7.4.5.3.1 Remove - - - - - - 

7.4.5.3.2 Disassemble - - - - - - 

7.4.5.3.3 Inspect - - - - - - 

7.4.5.3.4 Repair - - - - - - 

7.4.5.3.5 Assemble - - - - - - 

7.4.5.3.6 Install - - - - - - 


Fixture 

7.4.5.4.1 Inspect - - - - - - 

7.4.5.4.2 Operate - - - - - - 

7.4.5.5 Ammunitions Delinker Loader 

7.4.5.5.1 Nomenclature - - - - - - 

7.4.5.5.2 Theory Of Operation - - - - - - 

7.4.5.5.3 Disassemble - - - - - - 

7.4.5.5.4 Inspect - - - - - - 

7.4.5.5.5 Repair - - - - - - 

7.4.5.5.6 Assemble - - - - - - 

7.4.5.5.7 Use - - - - - - 

7.4.6 Ammunition Loading System 

Replenisher 

7.4.6.1 Nomenclature - - - - - - 

7.4.6.2 Theory Of Operation - - - - - - 

7.4.6.3 Disassemble - - - - - - 

7.4.6.4 Inspect - - - - - - 

7.4.6.5 Repair - - - - - - 

7.4.6.6 Assemble - - - - - - 

7.4.6.7 Use - - - - - - 

74 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 



TR: TOs 1F-15()-2-94JG-31-Series, 

1F-15()-2-94JG-32-Series, 1F-15()-6, 

1F-15()-33-1-2, 6J14-5-11-8-1, 11B29- 

3-25-2, 11B29-3-28-1, 11B29-3-60-2, 

11B29-3-61-2, 11B29-3-73-1, 11L1-3- 

28-2, 11L1-3-29-2, 11LA8-7-3, 11L1- 

2-24-2, 11L1-3-29-2, 16W6-25-2, 

16W6-25-12, 33D5-12-208-1, 33D5- 

53-13-1, 33D5-53-1-111, 33D9-14-69- 

1, 33D9-45-34-1, 33D5-30-4-1, 33D5- 

3-46-1 

* 7.5.1 Description A - - - - 



7.5.4 SUU-59 Pylon 

* 7.5.4.1 Remove 3b - - - - - 

7.5.4.2 Disassemble - - - - - - 

7.5.4.3 Inspect - - - - - - 

7.5.4.4 Repair - - - - - - 

7.5.4.5 Assemble - - - - - - 

* 7.5.4.6 Install 3b - - - - - 


A/E24T-171/199 Test Set 

1b - - - - - 



1b - - - - - 

* 7.5.4.9 Perform Operational Check 

with A/E24T-169/198 

1b - - - - - 

7.5.4.10 Perform Nuclear Weapons 

Release System Checkout 

(CAT D) with A/E24T-198 

- - - - - - 

7.5.5 SUU-60 Pylon 

7.5.5.1 Remove - - - - - - 

7.5.5.2 Disassemble - - - - - - 

7.5.5.3 Inspect - - - - - - 

7.5.5.4 Repair - - - - - - 

7.5.5.5 Assemble - - - - - - 

7.5.5.6 Install - - - - - - 



- - - - - - 



- - - - - - 

7.5.5.9 Perform Operational Check 

with A/E24T-169/198 

- - - - - - 

7.5.6 SUU-73A Pylon 

7.5.6.1 Remove - - - - - - 

7.5.6.2 Disassemble - - - - - - 

7.5.6.3 Inspect - - - - - - 

7.5.6.4 Repair - - - - - - 

7.5.6.5 Assemble - - - - - - 

7.5.6.6 Install - - - - - - 


A/E24T-199 Test Set 

- - - - - - 

75 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 




- - - - - - 


with A/E24T-198 Test Set 

- - - - - - 




- - - - - - 

7.5.6.11 SUU-73 B/A Pylon 

7.5.6.11.1 Remove - - - - - - 

7.5.6.11.2 Disassemble - - - - - - 

7.5.6.11.3 Inspect - - - - - - 

7.5.6.11.4 Repair - - - - - - 

7.5.6.11.5 Assemble - - - - - - 

7.5.6.11.6 Install - - - - - - 

7.5.6.11.7 Perform Functional Check with 


- - - - - - 

7.5.6.11.8 Perform Bench Check with 


- - - - - - 

7.5.6.11.9 Perform Operational Check 


- - - - - - 

7.5.7 MAU-12 

* 7.5.7.1 Remove 2b - - - - - 

7.5.7.2 Disassemble B - - - - - - 

7.5.7.3 Inspect B - - - - - - 

7.5.7.4 Repair - - - - - - 

7.5.7.5 Assemble B - - - - - - 

* 7.5.7.6 Install 2b - - - - - 



2b - - - - - 


MAU-12/40/50, A/E24T-170 

or A/E24T-197 Test Set 

2b - - - - - 


with A/E24T-169/198 Test Set 

1b - - - - - 



- - - - - - 

7.5.8 BRU-46 

* 7.5.8.1 Remove 2b - - - - - 

* 7.5.8.2 Disassemble 2b - - - - - 

* 7.5.8.3 Inspect 2b - - - - - 

7.5.8.4 Repair - - - - - - 

* 7.5.8.5 Assemble 2b - - - - - 

* 7.5.8.6 Install 2b - - - - - 



b - - - - - 



2b - - - - - 



2b - - - - - 


Proofload Test Set 

2b - - - - - 

7.5.9 BRU-47 

76 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


7.5.9.1 Remove - - - - - - 

7.5.9.2 Disassemble B - - - - - - 

7.5.9.3 Inspect B - - - - - - 

7.5.9.4 Repair - - - - - - 

7.5.9.5 Assemble B - - - - - - 

7.5.9.6 Install - - - - - - 



- - - - - - 



- - - - - - 



- - - - - - 


Proofload Test Set 

- - - - - - 




- - - - - - 

7.5.10 BRU-61 

* 7.5.10.1 Remove 2b - - - - - 

* 7.5.10.2 Disassemble - - - - - - 

* 7.5.10.3 Inspect - - - - - - 

7.5.10.4 Repair - - - - - - 

* 7.5.10.5 Assemble - - - - - - 

* 7.5.10.6 Install 2b - - - - - 

* 7.5.10.7 Perform Operational (BIT) 

Check 

2b - - - - - 



2b - - - - - 

7.5.11 LAU-106 Launcher 

* 7.5.11.1 Remove 2b - - - - - 

* 7.5.11.2 Disassemble 1b - - - - - 

* 7.5.11.3 Inspect 1b - - - - - 

7.5.11.4 Repair - - - - - - 

* 7.5.11.5 Assemble 1b - - - - - 

* 7.5.11.6 Install 2b - - - - - 



2b - - - - - 

7.5.11.8 Breech Assembly 

Reconfiguration 

- - - - - - 

* 7.5.11.9 Bench Check with A/E24T- 

170/197 Test Set 

2b - - - - - 



1b - - - - - 

7.5.12 ADU-552 Launcher Adapter 

* 7.5.12.1 Remove 2b - - - - - 

7.5.12.2 Disassemble - - - - - - 

7.5.12.3 Inspect - - - - - - 

7.5.12.4 Repair - - - - - - 

7.5.12.5 Assemble - - - - - - 

* 7.5.12.6 Install 2b - - - - - 

7.5.12.7 Bench Check with A/E24T- 

170/197 Test Set 

- - - - - - 

77 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 



* 7.5.13.1 Remove 2b - - - - - 


* 7.5.13.3 Inspect B 2b - - - - - 

7.5.13.4 Repair - - - - - - 

* 7.5.13.5 Assemble B 2b - - - - - 

* 7.5.13.6 Install 2b - - - - - 



2b - - - - - 



2b - - - - - 



2b - - - - - 

* 7.5.13.10 

7.5.14 

7.5.15 

Perform Detent Test 2b - - - - - 

7.5.16 SUU-20 

7.5.16.1 Remove - - - - - - 

7.5.16.2 Disassemble - - - - - - 

7.5.16.3 Inspect - - - - - - 

7.5.16.4 Repair - - - - - - 

7.5.16.5 Assemble - - - - - - 

7.5.16.6 Install - - - - - - 



- - - - - - 



- - - - - - 

7.5.17 Handling Adapters 

7.5.17.1 Pylon Handling Adapter 

* 7.5.17.1.1 Inspect - - - - - - 

7.5.17.1.2 Maintain - - - - - - 

* 7.5.17.1.3 Use - - - - - - 

7.5.17.2 Universal Pylon Loading 

Adapter 

7.5.17.2.1 Inspect 1b - - - - - 

7.5.17.2.2 Maintain - - - - - - 

7.5.17.2.3 Use 1b - - - - - 

7.5.17.3 Pylon Installation Adapter 

7.5.17.3.1 Inspect - - - - - - 

7.5.17.3.2 Maintain - - - - - - 

7.5.17.3.3 Use - - - - - - 

7.5.18 Conformal Fuel Tank (CFT) 

7.5.18.1 Perform Fault Isolation with 


- - - - - - 


with A/E24T-198 

- - - - - - 

7.5.19 CFT Transport Dolly 

7.5.19.1 Inspect - - - - - - 

7.5.19.2 Use - - - - - - 

7.5.20 Residual Fuel CFT Handling - - - - - - 

78 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


7.5.21 BRU-46 / 47 Fairing Assembly 

(CFT) 

7.5.21.1 Remove - - - - - - 

7.5.21.2 Inspect - - - - - - 

7.5.21.3 Install - - - - - - 


Inspections 

7.6.1 F-15A-D Model 

TR: 1F-15A-6, 1F-15A-2-94JG-31-1, 

1F-15A-2-94JG-32-1, 1F-15A-2-94JG- 

50-3 

7.6.1.1 M61 Gun - - - - - - 

7.6.1.2 LAU-106 Launcher - - - - - - 

7.6.1.3 LAU-128 Launcher - - - - - - 

7.6.1.4 MAU-12 Bomb Rack - - - - - - 

7.6.1.5 SUU-59 Pylon - - - - - - 

7.6.1.6 SUU-60 Pylon - - - - - - 

7.6.2 F-15E 

TR: TOs 1F-15E-6, 1F-15E-2-94JG- 

50-3, 1F-15E-2-94JG-31-1, 1F-15E-2- 

94JG-32-1 

7.6.2.1 BRU-61 - - - - - - 

7.6.2.2 M61 Gun - - - - - - 

7.6.2.3 LAU-106 Launcher - - - - - - 

7.6.2.4 LAU-128 Launcher - - - - - - 

7.6.2.5 SUU-20 Dispenser - - - - - - 

7.6.2.6 SUU-59 Pylon - - - - - - 

7.6.2.7 SUU-73 Pylon - - - - - - 


Components 

TR: TOs 1F-15E-2-27JG-10-3, 1F- 

15E-2-31JG-12-1, 1F-15E-2-94JG-32- 

1, 1F-15E-33-1-2, 1F-15E-2-94GS- 

Series, 1F-15()-2-94JG-10-1, 1F-15A- 

2-94JG-31-3, 1F-15A-2-94JG-31-4, 

1F-15A-2-94JG-31-6, 1F-15()-33-1-2, 

16W6-25-8-1 


7.7.2 Converter Programmer 

* 7.7.2.1 Remove 1b - - - - - 

* 7.7.2.2 Install 1b - - - - - 


(PACS BIT Check) 

2b - - - - - 

7.7.3 Armament Control Panel 

7.7.3.1 Remove - - - - - - 

7.7.3.2 Install - - - - - - 



- - - - - - 

7.7.4 Multipurpose Color Display 

7.7.4.1 Remove - - - - - - 

7.7.4.2 Install - - - - - - 


(MPCD/PACS BIT Check) 

- - - - - - 

79 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


7.7.5 Master Armament Bus Control 

Contactor 

7.7.5.1 Remove - - - - - - 

7.7.5.2 Install - - - - - - 



- - - - - - 

7.7.6 Armament 1553 Mux Bus 

Coupling Transformer 

7.7.6.1 Remove - - - - - - 

7.7.6.2 Install - - - - - - 



- - - - - - 

7.7.7 Armament Bus Control 

Contactor 

7.7.7.1 Remove - - - - - - 

7.7.7.2 Install - - - - - - 



- - - - - - 

7.7.8 Emergency Jett Switch 

7.7.8.1 Remove - - - - - - 

7.7.8.2 Install - - - - - - 

7.7.8.3 Perform PACS BIT Check - - - - - - 

7.7.9 Missile Launcher Auxiliary 

Relay Panel 

7.7.9.1 Remove - - - - - - 

7.7.9.2 Install - - - - - - 



- - - - - - 

7.7.10 PACS Termination Resistor 

Assembly (Left and Right) 

7.7.10.1 Remove - - - - - - 

7.7.10.2 Install - - - - - - 


with A/E24T-169 / 198 Test 

Set 

- - - - - - 

7.7.11 Flight Control Stick Grip 

7.7.11.1 Remove - - - - - - 

7.7.11.2 Install - - - - - - 


7.7.12 Armament Safety Switch 

7.7.12.1 Remove - - - - - - 

7.7.12.2 Install - - - - - - 

7.7.12.3 Perform PACS BIT Check - - - - - - 

7.7.13 Left / Right Hand Controller 

7.7.13.1 Remove - - - - - - 

7.7.13.2 Install - - - - - - 


7.7.14 Nuclear Consent Panel 

7.7.14.1 Remove - - - - - - 

7.7.14.2 Install - - - - - - 

80 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 



Release Check (CAT D) with 

- - - - - - 

7.7.15 


Encoder / Decoder 

7.7.15.1 Remove - - - - - - 

7.7.15.2 Install - - - - - - 

7.7.15.3 Perform Encoder / Decoder 

Bench Check with A/E-24T- 

197 Test Set 

- - - - - - 




- - - - - - 

7.7.16 Power Supply 

7.7.16.1 Remove - - - - - - 

7.7.16.2 Install - - - - - - 

7.7.16.3 Perform Power Supply Bench 

Check with A/E-24T-197 Test 

Set 

- - - - - - 




- - - - - - 

7.7.17 Electronic Sequencing Unit 

(ESU) 

7.7.17.1 Remove - - - - - - 

7.7.17.2 Install - - - - - - 



- - - - - - 



- - - - - - 


TR: TOs 31R4-2PSN11-1, 33D5-3-46- 

1, 33D5-3-46-4, 33D5-3-50-1, 33D5- 

3-50-4, 33D5-12-231-1, 33D5-12-231- 

4, 33D5-16-72-1, 33D5-16-72-4, 

33D5-30-4-1, 33D5-30-4-4, 33D5-53- 

13-1, 33D5-63-5-1, 33D5-63-5-4, 

33D9-54-7-42 

7.8.1 Description - - - - - - 


7.8.2.1 A/E24T-169 - - - - - - 

7.8.2.2 A/E24T-170 - - - - - - 

7.8.2.3 A/E24T-171 - - - - - - 

* 7.8.2.4 A/E24T-197 A - - - - - 

* 7.8.2.5 A/E24T-198 A - - - - - 

* 7.8.2.6 A/E24T-199 A - - - - - 


* 7.8.2.8 Detent Tester A - - - - - 

* 7.8.2.9 AN/GYQ-79 (CMBRE) A - - - - - 

7.8.3 Inspect 

7.8.3.1 A/E24T-169 - - - - - - 

7.8.3.2 A/E24T-170 - - - - - - 

7.8.3.3 A/E24T-171 - - - - - - 

* 7.8.3.4 A/E24T-197 1a - - - - - 

81 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


* 7.8.3.5 A/E24T-198 1a - - - - - 

* 7.8.3.6 A/E24T-199 1a - - - - - 


* 7.8.3.8 Detent Tester 1a - - - - - 

* 7.8.3.9 AN/GYQ-79 (CMBRE) 1a - - - - - 


7.8.4.1 A/E24T-169 - - - - - - 

7.8.4.2 A/E24T-170 - - - - - - 

7.8.4.3 A/E24T-171 - - - - - - 

7.8.4.4 A/E24T-197 - - - - - - 

7.8.4.5 A/E24T-198 - - - - - - 

7.8.4.6 A/E24T-199 - - - - - - 


7.8.4.8 Detent Tester - - - - - - 

7.8.4.9 AN/GYQ-79 (CMBRE) - - - - - - 

7.8.5 Repair 

7.8.5.1 A/E24T-169 - - - - - - 

7.8.5.2 A/E24T-170 - - - - - - 

7.8.5.3 A/E24T-171 - - - - - - 

7.8.5.4 A/E24T-197 - - - - - - 

7.8.5.5 A/E24T-198 - - - - - - 

7.8.5.6 A/E24T-199 - - - - - - 


7.8.5.8 Detent Tester - - - - - - 

7.8.5.9 AN/GYQ-79 (CMBRE) - - - - - - 

7.8.6 Use Special Programming 

Equipment 

7.8.6.1 Cryptovariable Keyer (KYK- 

- - - - - - 

7.8.6.2 

13) 

Precision Lightweight GPS 

Receiver (AN/PSN-11) 

- - - - - - 

7.8.6.3 AN/CYZ-10 Data Transfer 

Device 

- - - - - - 


TR: TOs 1F-15A-2-00FR-WA-1, 1F- 

15()-2-05JG-00-1, 1F-15()-2-94FI-00- 

1, 1F-15()-2-94JG-10-1, 1F-15()-2- 

94JG-31-Series, 1F-15()-2-94JG-32- 

Series, 1F-15()-2-94JG-50-Series, 1F- 

15()-2-94SD-00-1, 1F-15()-2-94WD- 

00-1, 1F-15()-6, 1F-15()-33-1-2, 

11B29-3-25-2, 11L1-2-24-2, 11L1-3- 

29-2, 11LA8-10-2, 16W6-25-2, 16W6- 

25-12 



Order 

1a - - - - - 

* 7.9.3 Use Schematic/Wiring 

Diagrams 

1a - - - - - 



TR: TOs 1-1M-33, 1F-15()-33-1-2 



82 1 January 2012



Tasks 




B 

C 

5 

Level 




Trainer 

Initials 

Certifier 

Initials 

(1) (2) (1) (2) (1) (2) 


* 7.10.2.1 Load F 1b - - - - - 

* 7.10.2.2 Unload F 1b - - - - - 


7.10.3.1 Load - - - - - - 

7.10.3.2 Unload - - - - - - 

83 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



TR: TOs 1-1A-15, 11-1-38, 11LA8-13- 

3, 11N-B1004-1, 34Y1-87-11, 35C2-3- 

372-11, 35D3-2-25-1, 35D3-9-23-1, 

35DA3-6-37-1, 35D5-3-8-31, 35E9-90- 

11, 35F5-5-11-31, 35F5-5-16-1 

TR: ????? 



* 8.1.2.1 Inspect 3b - - - - - 

* 8.1.2.2 Operate 3b - - - - - 

* 8.1.2.3 Drive 3b - - - - - 



* 8.1.3.1 Inspect 1b - - - - - 

* 8.1.3.2 Operate 1b - - - - - 

* 8.1.3.3 Drive 1b - - - - - 


* 8.1.4.1 Inspect 2b - - - - - 

* 8.1.4.2 Operate 2b - - - - - 


8.1.5.1 Inspect - - - - - - 

8.1.5.2 Operate - - - - - - 

8.1.6 A/M32C-10 Air Conditioner - - - - - - 

* 8.1.6.1 Inspect 2b - - - - - 

* 8.1.6.2 Operate 2b - - - - - 


* 8.1.7.1 Inspect 1b - - - - - 

* 8.1.7.2 Load / Unload 1b - - - - - 



TR: 36A11-18-3-1, 36A11-18-3-4 

8.1.8.1 Inspect - - - - - - 

8.1.8.2 Maintain - - - - - - 


8.1.9.1 Inspect - - - - - - 

8.1.9.2 Operate - - - - - - 


8.1.10.1 Inspect - - - - - - 

8.1.10.2 Operate - - - - - - 



* 8.1.11.1 Inspect 1b - - - - - 

8.1.11.2 Maintain - - - - - - 

* 8.1.11.3 Operate 1b - - - - - 


TR: TOs 1F-16()-16, 1F-16()-2-94GS- 

00-1, 1F-16()-2-10JG-00-1, 1F-16C-33- 

1-2 

* 8.2.1 Aircraft Switches, Controls, and 

Indicators 

B - - - - - 



84 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



F 3b - - - - - 



2b - - - - - 


TR: TOs 1F-16()-2-94JG-50-Series, 1F- 

16C-2-94FI-00-1, 1F-16C-33-1-2, 

11W1-7-16-2, 11W1-12-4-32 





Procedures 

F 3b - - - - - 

* 8.3.5 Malfunctions / Jams * A - - - - - 

* 8.3.6 Perform Functional Check with 

16U75060 Test Set 

1b - - - - - 

* 8.3.7 Perform Operational Check 

with 16U75060 Test Set 

1b - - - - - 

8.3.8 Perform Operational Check 

with Stores System Tester 

(SST) O-Level Test Set 

(16U75A47002G001) 

- - - - - - 

8.3.9 M61A1 Gun 




* 8.3.9.4 Remove 2b - - - - - 

* 8.3.9.5 Disassemble 2b - - - - - 

* 8.3.9.6 Inspect 1b - - - - - 

8.3.9.7 Repair - - - - - - 

* 8.3.9.8 Assemble 2b - - - - - 

* 8.3.9.9 Install 2b - - - - - 

8.3.9.10 Boresight - - - - - - 

* 8.3.9.11 Perform Performance Check In- 

Shop 

2b - - - - - 

8.3.10 Gun Aft Mount Assembly 

8.3.10.1 Remove - - - - - - 

8.3.10.2 Install - - - - - - 

8.3.11 Hydraulic Drive Assembly 

8.3.11.1 Remove - - - - - - 

8.3.11.2 Install - - - - - - 

8.3.11 Ammunition Handling Set 

* 8.3.12.1 Remove 2b - - - - - 

8.3.12.2 Inspect - - - - - - 

* 8.3.12.3 Install 2b - - - - - 

* 8.3.12.4 Adjust Slack b - - - - - 

8.3.12.5 Ammunition Drum Assembly 

8.3.12.5.1 Remove - - - - - - 

8.3.12.5.2 Disassemble - - - - - - 

8.3.12.5.3 Inspect - - - - - - 

8.3.12.5.4 Repair - - - - - - 

8.3.12.5.5 Assemble - - - - - - 

85 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

8.3.12.5.6 Install - - - - - - 

8.3.12.6 Entrance Unit 

8.3.12.6.1 Remove - - - - - - 

8.3.12.6.2 Disassemble - - - - - - 

8.3.12.6.3 Inspect - - - - - - 

8.3.12.6.4 Repair - - - - - - 

8.3.12.6.5 Assemble - - - - - - 

8.3.12.6.6 Install - - - - - - 

8.3.12.7 Exit Unit 

8.3.12.7.1 Remove - - - - - - 

8.3.12.7.2 Disassemble - - - - - - 

8.3.12.7.3 Inspect - - - - - - 

8.3.12.7.4 Repair - - - - - - 

8.3.12.7.5 Assemble - - - - - - 

8.3.12.7.6 Install - - - - - - 

8.3.12.8 Transfer Unit 

8.3.12.8.1 Remove - - - - - - 

8.3.12.8.2 Disassemble - - - - - - 

8.3.12.8.3 Inspect - - - - - - 

8.3.12.8.4 Repair - - - - - - 

8.3.12.8.5 Assemble - - - - - - 

8.3.12.8.6 Install - - - - - - 

8.3.12.9 Access Unit 

8.3.12.9.1 Remove - - - - - - 

8.3.12.9.2 Disassemble - - - - - - 

8.3.12.9.3 Inspect - - - - - - 

8.3.12.9.4 Repair - - - - - - 

8.3.12.9.5 Assemble - - - - - - 

8.3.12.9.6 Install - - - - - - 

8.3.12.10 Conveyor Assembly 

8.3.12.10.1 Remove - - - - - - 

8.3.12.10.2 Disassemble - - - - - - 

8.3.12.10.3 Inspect - - - - - - 

8.3.12.10.4 Repair - - - - - - 

8.3.12.10.5 Assemble - - - - - - 

8.3.12.10.6 Install - - - - - - 

8.3.12.11 Main Gun Drive Assembly 

8.3.12.11.1 Remove - - - - - - 

8.3.12.11.2 Disassemble - - - - - - 

8.3.12.11.3 Inspect - - - - - - 

8.3.12.11.4 Repair - - - - - - 

8.3.12.11.5 Assemble - - - - - - 

8.3.12.11.6 Install - - - - - - 

8.3.13 Transfer Unit Checking Fixture 

8.3.13.1 Inspect - - - - - - 

8.3.13.2 Operate - - - - - - 

8.3.14 Entrance / Exit Checking 

Fixture 

8.3.14.1 Inspect - - - - - - 

8.3.14.2 Operate - - - - - - 

86 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 


Fixture 

8.3.15.1 Inspect - - - - - - 

8.3.15.2 Operate - - - - - - 


TR: TOs 35D2-19-1, 35D30-4-11-1, 

35D-30-4-15-1, 1F-16C-33-1-2 



* 8.4.3 Use UALS / LALS 2b - - - - - 

8.4.4 Universal Ammunition Loading 

System (UALS) 

8.4.4.1 Drum 

8.4.4.1.1 Remove - - - - - - 

8.4.4.1.2 Disassemble - - - - - - 

8.4.4.1.3 Inspect - - - - - - 

8.4.4.1.4 Repair - - - - - - 

8.4.4.1.5 Assemble - - - - - - 

8.4.4.1.6 Install - - - - - - 


8.4.4.2.1 Remove - - - - - - 

8.4.4.2.2 Disassemble - - - - - - 

8.4.4.2.3 Inspect - - - - - - 

8.4.4.2.4 Repair - - - - - - 

8.4.4.2.5 Assemble - - - - - - 

8.4.4.2.6 Install - - - - - - 


8.4.4.3.1 Remove - - - - - - 

8.4.4.3.2 Disassemble - - - - - - 

8.4.4.3.3 Inspect - - - - - - 

8.4.4.3.4 Repair - - - - - - 

8.4.4.3.5 Assemble - - - - - - 

8.4.4.3.6 Install - - - - - - 


Fixture 

8.4.4.4.1 Inspect - - - - - - 

8.4.4.4.2 Operate - - - - - - 


Fixture 

8.4.4.5.1 Inspect - - - - - - 

8.4.4.5.2 Operate - - - - - - 



8.4.4.6.1 Inspect - - - - - - 

8.4.4.6.2 Operate - - - - - - 

8.4.5 Linkless Ammunition Loading 

System (LALS) 

8.4.5.1 Storage Container 

8.4.5.1.1 Remove - - - - - - 

8.4.5.1.2 Disassemble - - - - - - 

8.4.5.1.3 Inspect - - - - - - 

8.4.5.1.4 Repair - - - - - - 

87 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

8.4.5.1.5 Assemble - - - - - - 

8.4.5.1.6 Install - - - - - - 


8.4.5.2.1 Remove - - - - - - 

8.4.5.2.2 Disassemble - - - - - - 

8.4.5.2.3 Inspect - - - - - - 

8.4.5.2.4 Repair - - - - - - 

8.4.5.2.5 Assemble - - - - - - 

8.4.5.2.6 Install - - - - - - 


8.4.5.3.1 Remove - - - - - - 

8.4.5.3.2 Disassemble - - - - - - 

8.4.5.3.3 Inspect - - - - - - 

8.4.5.3.4 Repair - - - - - - 

8.4.5.3.5 Assemble - - - - - - 

8.4.5.3.6 Install - - - - - - 

8.4.5.4 Transfer Unit 

8.4.5.4.1 Remove - - - - - - 

8.4.5.4.2 Disassemble - - - - - - 

8.4.5.4.3 Inspect - - - - - - 

8.4.5.4.4 Repair - - - - - - 

8.4.5.4.5 Assemble - - - - - - 

8.4.5.4.6 Install - - - - - - 

8.4.6 Universal Delinker Loader - - - - - - 

8.4.6.1 Nomenclature - - - - - - 


8.4.6.3 Disassemble - - - - - - 

8.4.6.4 Inspect - - - - - - 

8.4.6.5 Repair - - - - - - 

8.4.6.6 Assemble - - - - - - 

8.4.6.7 Use - - - - - - 


Replenisher 

8.4.7.1 Nomenclature - - - - - - 


8.4.7.3 Disassemble - - - - - - 

8.4.7.4 Inspect - - - - - - 

8.4.7.5 Repair - - - - - - 

8.4.7.6 Assemble - - - - - - 

8.4.7.7 Use - - - - - - 



16C-33-1-2, 1F-16()-2-94GS-00-1, 1F- 

16()-6, 1F-16()-6-11, 11B29-3-25-2, 

11B29-3-25-7-1, 11B29-3-28-1, 11B29- 

3-28-7-1, 11B29-3-35-2, 11B29-3-71-1, 

11L1-2-10-1, 11L1-2-10-7-1, 11L1-2- 

15-1, 11L1-2-16-2, 11L1-2-20-1, 11L1- 

2-24-2, 11L1-2-30-1, 11L1-3-27-1, 

11LA8-9-2, 16W6-40-2, 16W6-42-2, 

16W6-51-2, 16W6-52-2, 16W6-53-2, 

33D5-53-13-1, 33D5-63-2-1, 33D9-57- 

1 

* 8.5.1 Description A - - - - - 

88 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



8.5.4 Wing Weapons Pylon 

* 8.5.4.1 Remove 2b - - - - - 

8.5.4.2 Disassemble - - - - - - 

8.5.4.3 Inspect - - - - - - 

8.5.4.4 Repair - - - - - - 

8.5.4.5 Assemble - - - - - - 

* 8.5.4.6 Install 2b - - - - - 


with 16U75501 / SST O-Level 

Test Set 

- - - - - - 


16U75500 / SST I-Level Test 

Set 

- - - - - - 


with RNRIU Installed 

- - - - - - 



1b - - - - - 

8.5.5 16S1501 Pylon / Launcher 

8.5.5.1 Remove - - - - - - 

8.5.5.2 Disassemble - - - - - - 

8.5.5.3 Inspect - - - - - - 

8.5.5.4 Repair - - - - - - 

8.5.5.5 Assemble - - - - - - 

8.5.5.6 Install - - - - - - 


Pylon / Launcher Test Set 

- - - - - - 

8.5.6 ALE-50 Pylon 

8.5.6.1 Remove - - - - - - 

8.5.6.2 Disassemble - - - - - - 

8.5.6.3 Inspect - - - - - - 

8.5.6.4 Repair - - - - - - 

8.5.6.5 Assemble - - - - - - 

8.5.6.6 Install - - - - - - 


G132973-1 Fault Isolation 

System Tester (FIST) 

- - - - - - 

8.5.7 Centerline Pylon 

* 8.5.7.1 Remove 1b - - - - - 

8.5.7.2 Disassemble - - - - - - 

8.5.7.3 Inspect - - - - - - 

8.5.7.4 Repair - - - - - - 

8.5.7.5 Assemble - - - - - - 

* 8.5.7.6 Install 1b - - - - - 



- - - - - - 



Set 

- - - - - - 

89 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



- - - - - - 

8.5.7.10 

Test Set 

Perform Operational Check 

with RNRIU Installed 

- - - - - - 

8.5.8 MAU-12 

* 8.5.8.1 Remove 2b - - - - - 


* 8.5.8.3 Inspect B 2b - - - - - 

8.5.8.4 Repair - - - - - - 

* 8.5.8.5 Assemble B 2b - - - - - 

* 8.5.8.6 Install 2b - - - - - 



- - - - - - 



Set 

2b - - - - - 



2b - - - - - 

8.5.9 BRU-46 

8.5.9.1 Remove - - - - - - 

8.5.9.2 Disassemble - - - - - - 

8.5.9.3 Inspect - - - - - - 

8.5.9.4 Repair - - - - - - 

8.5.9.5 Assemble - - - - - - 

8.5.9.6 Install - - - - - - 



Set 

- - - - - - 



- - - - - - 

8.5.10 BRU-57 

* 8.5.10.1 Remove 1b - - - - - 

8.5.10.2 Disassemble - - - - - - 

8.5.10.3 Inspect - - - - - - 

8.5.10.4 Repair - - - - - - 

8.5.10.5 Assemble - - - - - - 

* 8.5.10.6 Install 1b - - - - - 


- - - - - - 




Set 

- - - - - - 

8.5.11 BRU-61 

8.5.11.1 Remove 2b - - - - - 

8.5.11.2 Disassemble - - - - - - 

8.5.11.3 Inspect - - - - - - 

8.5.11.4 Repair - - - - - - 

8.5.11.5 Assemble - - - - - - 

8.5.11.6 Install 2b - - - - - 

90 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



2b - - - - - 

8.5.12 AIM-9 Launcher 

8.5.12.1 Remove - - - - - - 

8.5.12.2 Disassemble - - - - - - 

8.5.12.3 Inspect - - - - - - 

8.5.12.4 Repair - - - - - - 

8.5.12.5 Assemble - - - - - - 

8.5.12.6 Install - - - - - - 



- - - - - - 



Test Set 

- - - - - - 



Set 

- - - - - - 

8.5.12.10 Perform Detent Test - - - - - - 


* 8.5.13.1 Remove 2b - - - - - 


* 8.5.13.3 Inspect B 2b - - - - - 

8.5.13.4 Repair - - - - - - 

* 8.5.13.5 Assemble B 2b - - - - - 

* 8.5.13.6 Install 2b - - - - - 



2b - - - - - 



Test Set 

- - - - - - 



Set 

2b - - - - - 

* 8.5.13.10 Perform Detent Test 2b - - - - - 

8.5.14 Launcher Adapter 

* 8.5.14.1 Remove 2b - - - - - 

8.5.14.2 Disassemble - - - - - - 

8.5.14.3 Inspect - - - - - - 

8.5.14.4 Repair - - - - - - 

8.5.14.5 Assemble - - - - - - 

* 8.5.14.6 Install 2b - - - - - 

8.5.15 LAU-117 

* 8.5.15.1 Remove 1b - - - - - 

8.5.15.2 Disassemble - - - - - - 

8.5.15.3 Inspect - - - - - - 

8.5.15.4 Repair - - - - - - 

8.5.15.5 Assemble - - - - - - 

* 8.5.15.6 Install 1b - - - - - 



Set 

- - - - - - 

8.5.16 LAU-118 

91 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 8.5.16.1 Remove 1b - - - - - 

8.5.16.2 Disassemble - - - - - - 

8.5.16.3 Inspect - - - - - - 

8.5.16.4 Repair - - - - - - 

8.5.16.5 Assemble - - - - - - 

* 8.5.16.6 Install 1b - - - - - 


16U75060 Test set 

- - - - - - 


TTU-416 Test Set 

- - - - - - 


AN/GSM-369 Test Set 

- - - - - - 

8.5.16.10 Program using Enhanced 

Diagnostic Aid (EDNA) 

- - - - - - 

8.5.17 LAU-131 Rocket Launcher 

8.5.17.1 Remove - - - - - - 

8.5.17.2 Disassemble - - - - - - 

8.5.17.3 Inspect - - - - - - 

8.5.17.4 Repair - - - - - - 

8.5.17.5 Assemble - - - - - - 

8.5.17.6 Install - - - - - - 



- - - - - - 


MK-III / MK-IV Tester 

- - - - - - 

8.5.18 SUU-20 

* 8.5.18.1 Remove 1b - - - - - 

8.5.18.2 Disassemble - - - - - - 

8.5.18.3 Inspect - - - - - - 

8.5.18.4 Repair - - - - - - 

8.5.18.5 Assemble - - - - - - 

* 8.5.18.6 Install 1b - - - - - 



- - - - - - 



Set 

- - - - - - 

8.5.19 TER-9A 

* 8.5.19.1 Remove 2b - - - - - 

* 8.5.19.2 Disassemble 1b - - - - - 

* 8.5.19.3 Inspect 1b - - - - - 

8.5.19.4 Repair - - - - - - 

* 8.5.19.5 Assemble 1b - - - - - 

* 8.5.19.6 Install 2b - - - - - 



1b - - - - - 



Set 

- - - - - - 



- - - - - - 

92 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 


Inspections 

TR: TOs 1F-16()-6, 1F-16()-6-11, 1F- 

16()-2-94JG-30-Series, 1F-16()-2-94JG- 

50-1 

* 8.6.1 TER-9A 3b - - - - - 

8.6.2 Gun - - - - - - 

* 8.6.3 MAU-12 Bomb Rack 3b - - - - - 

8.6.4 AIM-9 Missile Launcher - - - - - - 

8.6.5 LAU-117 Launcher - - - - - - 

8.6.6 LAU-118 Launcher - - - - - - 

8.6.7 LAU-129 Launcher - - - - - - 

8.6.8 SUU-20 Dispenser - - - - - - 

8.6.9 LAU-131 Rocket Launcher - - - - - - 

8.6.10 ALE-50 Launcher Controller - - - - - - 

8.6.11 BRU-57 - - - - - - 

8.6.12 BRU-61 - - - - - - 

8.7 Armament Systems 

Components 


16()-2-94JG-30-Series, 1F-16()-2-94JG- 

50-2, 1F-16()-2-94JG-70-3, 11L1-2-16- 

2, 11L1-2-30-1, 12P3-2ALE50-2 


8.7.2 Conventional RIU / ACRIU 

8.7.2.1 Remove - - - - - - 

8.7.2.2 Install - - - - - - 

8.7.3 Missile RIU / AMRIU 

* 8.7.3.1 Remove 1b - - - - - 

* 8.7.3.2 Install 1b - - - - - 

8.7.4 Ruggedized Nuclear RIU 

8.7.4.1 Remove - - - - - - 

8.7.4.2 Install - - - - - - 

8.7.5 Jettison / Release RIU 

8.7.5.1 Remove - - - - - - 

8.7.5.2 Install - - - - - - 

8.7.6 Stores Control Panel / MFD 

8.7.6.1 Remove - - - - - - 

8.7.6.2 Install - - - - - - 

8.7.7 Central Interface Unit / ACIU / 

CCIU 

8.7.7.1 Remove - - - - - - 

8.7.7.2 Install - - - - - - 

8.7.7.3 Viper - - - - - - 

8.7.8 Master Arm and Release Matrix 

8.7.8.1 Remove - - - - - - 

8.7.8.2 Install - - - - - - 

8.7.9 SMS Power Matrix 

8.7.9.1 Remove - - - - - - 

8.7.9.2 Install - - - - - - 

8.7.10 Wing Stores Matrix 

8.7.10.1 Remove - - - - - - 

8.7.10.2 Install - - - - - - 

93 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

8.7.11 STA #5 Stores Matrix 

8.7.11.1 Remove - - - - - - 

8.7.11.2 Install - - - - - - 

8.7.12 Gun Control Unit 

8.7.12.1 Remove - - - - - - 

8.7.12.2 Install - - - - - - 

8.7.13 ALE-50 Launcher Controller 

8.7.13.1 Remove - - - - - - 

8.7.13.2 Install - - - - - - 

8.7.13.3 Viper - - - - - - 

8.7.14 Perform Stores Management 

System Confidence Check 

- - - - - - 


TR: TOs 11B29-3-25-2, 11B29-3-39-2, 

11L1-3-27-1, 33D5-3-47-1, 33D5-53-1- 

11, 33D5-53-13-1, 33D5-63-2-1, 33D5- 

63-2-21, 33D5-63-3-1, 33D7-13-231-1, 

33D9-54-7-42, 33D7-75-34-1, 33D9- 

45-42-1 

8.8.1 Description - - - - - - 


* 8.8.2.1 16U75060 Test Set A - - - - - 

8.8.2.2 16U75501 Test Set - - - - - - 

* 8.8.2.3 16U75500 Test Set - - - - - - 

* 8.8.2.4 Stores System Tester (SST) 

Instrument Unit 

(16U75A46002G001) 

A - - - - - 

8.8.2.5 SST Organizational Level 

Adapter Set 

(16U75A47002G001) 

- - - - - - 

* 8.8.2.6 SST Intermediate Level 

Adapter Set 

(16U75A48002G001) 

A - - - - - 

8.8.2.7 MAU-12/40/50/ Tester - - - - - - 

* 8.8.2.8 Detent Tester A - - - - - 


8.8.2.10 MK-III / MK-IV Tester - - - - - - 

8.8.2.11 Viper - - - - - - 

8.8.2.12 G132973-1 Fault Isolation 


- - - - - - 

8.8.2.13 Multiplex Bus Fault Isolator - - - - - - 

8.8.2.14 AN/GSM-396 (GM LTS) - - - - - - 

8.8.2.15 AN/GYQ-79 (CMBRE) A - - - - - 

8.8.3 Inspect 

* 8.8.3.1 16U75060 Test Set 1a - - - - - 

8.8.3.2 16U75501 Test Set - - - - - - 

* 8.8.3.3 16U75500 Test Set - - - - - - 

* 8.8.3.4 SST Instrument Unit 1a - - - - - 

8.8.3.5 SST O-Level Adapter Set - - - - - - 

* 8.8.3.6 SST I-Level Adapter Set 1a - - - - - 

8.8.3.7 MAU-12/40/50 Tester - - - - - - 

* 8.8.3.8 Detent Tester 1a - - - - - 


94 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 


8.8.3.11 Viper - - - - - - 



- - - - - - 


8.8.3.14 AN/GSM-396 (GM LTS) - - - - - - 

8.8.3.15 AN/GYQ-79 (CMBRE) - - - - - - 


8.8.4.1 16U75060 Test Set - - - - - - 

8.8.4.2 16U75501 Test Set - - - - - - 

8.8.4.3 16U75500 Test Set - - - - - - 

8.8.4.4 SST Instrument Unit - - - - - - 


8.8.4.6 SST I-Level Adapter Set - - - - - - 

8.8.4.7 MAU-12/40/50 Tester - - - - - - 

8.8.4.8 Detent Tester - - - - - - 



8.8.4.11 Viper - - - - - - 



- - - - - - 


8.8.4.14 AN/GSM-396 (GM LTS) - - - - - - 

8.8.4.15 AN/GYQ-79 (CMBRE) - - - - - - 

8.8.5 Repair 

8.8.5.1 16U75060 Test Set - - - - - - 

8.8.5.2 16U75501 Test Set - - - - - - 

8.8.5.3 16U75500 Test Set - - - - - - 

8.8.5.4 SST Instrument Unit - - - - - - 


8.8.5.6 SST I-Level Adapter Set - - - - - - 

8.8.5.7 MAU-12/40/50 Tester - - - - - - 

8.8.5.8 Detent Tester - - - - - - 




8.8.5.12 AN/GSM-396 (GM LTS) - - - - - - 

8.8.5.13 AN/GYQ-79 (CMBRE) - - - - - - 


TR: TOs 1F-16()-2-94FI-00-1, 1F-16()- 

2-94JG-00-1, 1F-16()-2-94WD-00-1-5 

* 8.9.1 Principles of Troubleshooting A 


Orders 

1a - - - - - 


Diagrams 

1a - - - - - 


8.10 Cockpit Armament Controls 


16()-2-94JG-Series 

8.10.1 Armament Panels 

8.10.1.1 Remove - - - - - - 

95 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

8.10.1.2 Install - - - - - - 

8.10.2 Armament Switches 

8.10.2.1 Remove - - - - - - 

8.10.2.2 Install - - - - - - 


TR: TOs 1-1M-33, 1F-16()-16, 1F-16C- 

33-1-2 



* 8.11.2.1 Load F 1b - - - - - 

* 8.11.2.2 Unload F 1b - - - - - 


8.11.3.1 Load - - - - - - 

8.11.3.2 Unload - - - - - - 

96 1 January 2012



97 1 January 2012



Tasks 



Knowledge and Technical References A B A B C D E A B C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



TR: TOs 11-1-38, 34Y1-87-11, 35C2- 

3-372-1, 35D3-2-25-1, 35D3-2-27-1, 

35D5-3-8-31, 35E9-90-41 



* 9.1.2.1 Inspect 3b - - - - - 

* 9.1.2.2 Operate 3b - - - - - 

* 9.1.2.3 Drive 3b - - - - - 


9.1.3.1 Inspect - - - - - - 

9.1.3.2 Operate - - - - - - 


* 9.1.4.1 Inspect 2b - - - - - 

* 9.1.4.2 Operate 2b - - - - - 

9.1.5 MC-2A Air Compressor 

9.1.5.1 Inspect - - - - - - 

9.1.5.2 Operate - - - - - - 

9.1.6 Polyalphaolefin (PAO) 

Cooling System 

* 9.1.6.1 Inspect 1b - - - - - 

* 9.1.6.2 Operate 1b - - - - - 

9.1.7 A/M27T-12 Hydraulic Test 

Stand (Mule) 

9.1.7.1 Inspect - - - - - - 

9.1.7.2 Operate - - - - - - 


* 9.1.8.1 Inspect 1b - - - - - 

* 9.1.8.2 Load / Unload 1b - - - - - 



TR: 36A11-18-3-1, 36A11-18-3-4 

9.1.9.1 Inspect - - - - - - 

9.1.9.2 Maintain - - - - - - 


9.1.10.1 Inspect - - - - - - 

9.1.10.2 Operate - - - - - - 


9.1.11.1 Inspect - - - - - - 

9.1.11.2 Operate - - - - - - 

9.1.12 MHU-194/E Lift Truck 

9.1.12.1 Inspect - - - - - - 

9.1.12.2 Operate - - - - - - 

9.1.13 East/West Crane 

* 9.1.13.1 Inspect 2b - - - - - 

* 9.1.13.2 Operate 2b - - - - - 



* 9.1.14.1 Inspect 1b - - - - - 

9.1.14.2 Maintain - - - - - - 

* 9.1.14.3 Operate 1b - - - - - 

98 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

9.1.15 Nitrogen Cart 

* 9.1.15.1 Inspect 1b - - - - - 

* 9.1.15.2 Operate 1b - - - - - 


TR: TOs 1-1A-1, IMIS 





B - - - - - 



F 1b - - - - - 

* 9.2.5 Remove / Install Panels 1b - - - - - 

9.2.5.1 Open/Close Canopy 1b - - - - - 



1b - - - - - 

* 9.2.7 Depressurize Aircraft 

Hydraulic System 

1b - - - - - 

9.2.8 Integrated Maintenance 

Information System (IMIS) 

* 9.2.8.1 Overview A - - - - - 

* 9.2.8.2 Components A - - - - - 

* 9.2.8.3 Operation 3b - - - - - 

9.2.8.4 Portable Maintenance Aid 

(PMA) 

* 9.2.8.4.1 Overview A - - - - - 

* 9.2.8.4.2 Components A - - - - - 

* 9.2.8.4.3 Operation 3b - - - - - 

9.2.8.4.4 Parts Ordering - - - - - - 

* 9.2.8.4.5 Connect / Disconnect to / from 

Ground 

3b - - - - - 

9.2.8.4.6 Connect / Disconnect to / from 

Pilot Station 

- - - - - - 

* 9.2.8.4.7 Upload / Download 

Information to / from PMA 

3b - - - - - 

9.3 Auxiliary Power Generation 

System 

TR: IMIS 

* 9.3.1 Overview A - - - - - 

* 9.3.2 Safety Hazards A - - - - - 

* 9.3.3 PMA Operation 2b - - - - - 

9.4 Aircraft Actuated Doors 

TR: IMIS 

9.4.1 Main Weapons Bay Doors 

* 9.4.1.1 PMA Operation 2b - - - - - 

* 9.4.1.2 Manual Operation 2b - - - - - 

* 9.4.1.3 Operational Check 2b - - - - - 

9.4.1.4 Remove - - - - - - 

9.4.1.5 Install - - - - - - 

9.4.1.6 Rigging - - - - - - 

9.4.2 Side Weapons Bay Doors 

9.4.2.1 PMA Operation - - - - - - 

9.4.2.2 Manual Operation - - - - - - 

99 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

9.4.2.3 Operational Check - - - - - - 

9.4.2.4 Remove - - - - - - 

9.4.2.5 Install - - - - - - 

9.4.2.6 Rigging - - - - - - 

9.4.3 Infrared Countermeasures 

(IRCM) Door 

* 9.4.3.1 PMA Operation 2b - - - - - 


9.4.4 Weapons Doors Components 

TR: IMIS 

9.4.4.1 AIM-120 Guides and 

Restraints 

9.4.4.1.1 Remove - - - - - - 

9.4.4.1.2 Install - - - - - - 

9.4.4.2 Side Weapons Bay Door Close 

Inhibit Switch 

9.4.4.2.1 Remove - - - - - - 

9.4.4.2.2 Install - - - - - - 

9.4.4.2.3 Adjust - - - - - - 

9.4.4.3 Power Drive Unit 

9.4.4.3.1 Main Weapons Bay 

9.4.4.3.1.1 Remove - - - - - - 

* 9.4.4.3.1.2 Inspect 2b - - - - - 

9.4.4.3.1.3 Install - - - - - - 

* 9.4.4.3.1.4 Service 2b - - - - - 

9.4.4.3.2 Side Weapons Bay 

9.4.4.3.2.1 Remove - - - - - - 

9.4.4.3.2.2 Inspect - - - - - - 

9.4.4.3.2.3 Install - - - - - - 

9.4.4.3.2.4 Service - - - - - - 

9.4.4.4 Open Sensor 

9.4.4.4.1 Remove - - - - - - 

9.4.4.4.2 Install - - - - - - 

9.4.4.4.3 Adjust - - - - - - 

9.4.4.5 Close Sensor 

9.4.4.5.1 Remove - - - - - - 

9.4.4.5.2 Install - - - - - - 

9.4.4.5.3 Adjust - - - - - - 

9.4.4.6 Weapons Bay Torque Tubes 

9.4.4.6.1 Remove - - - - - - 

9.4.4.6.2 Install - - - - - - 

9.4.4.7 Weapons Bay Strut 

9.4.4.7.1 Remove - - - - - - 

9.4.4.7.2 Install - - - - - - 


(SMS) 

TR: IMIS 

* 9.5.1 Overview B - - - - - 

* 9.5.2 System Safety Hazards B - - - - - 

9.5.3 Line Replaceable Modules 

9.5.3.1 Remove 1b - - - - - 

9.5.3.2 Install 1b - - - - - 

100 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

9.5.4 SMS Station Test 

9.5.4.1 Master Arm Switch 

- - - - - - 

9.5.4.2 

Operational Check 

Jettison Switch Operational 

Check 

- - - - - - 

9.5.4.3 Select Jettison Switch 

Operational Check 

- - - - - - 

9.5.4.4 SMS I-BIT Checks - - - - - - 

9.5.4.5 Stick Grip Switches 

Operational Checks 

- - - - - - 

9.5.4.6 Throttle Switches Operational 

Checks 

- - - - - - 


TR: IMIS, TO 11W1-12-15-2 




* 9.6.4 Safety Hazards B - - - - - 


Procedures 

F 3b - - - - - 

* 9.6.6 Malfunctions or Jams * A - - - - - 

9.6.7 Gun Safing Door 

9.6.7.1 Open - - - - - - 

9.6.7.2 Close - - - - - - 

9.6.7.3 Remove - - - - - - 

9.6.7.4 Install - - - - - - 

9.6.8 Gun Purge Door 

9.6.8.1 Remove - - - - - - 

9.6.8.2 Install - - - - - - 

9.6.8.3 Operate Gun Purge Door 2b - - - - - 

9.6.8.4 Gun Purge Door Actuator 

9.6.8.4.1 Remove - - - - - - 

9.6.8.4.2 Install - - - - - - 

9.6.8.4.3 Adjust - - - - - - 

9.6.9 M61A2 Gun 




* 9.6.9.4 Remove 2b - - - - - 

* 9.6.9.5 Disassemble 2b - - - - - 

* 9.6.9.6 Inspect 1b - - - - - 

9.6.9.7 Repair - - - - - - 

* 9.6.9.8 Assemble 2b - - - - - 

* 9.6.9.9 Install 2b - - - - - 

* 9.6.9.10 Perform In-Shop Performance 

Check 

2b - - - - - 

9.6.10 Ammunition Container 

* 9.6.10.1 Remove 2b - - - - - 

9.6.10.2 Disassemble - - - - - - 

9.6.10.3 Inspect - - - - - - 

9.6.10.4 Repair - - - - - - 

101 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

9.6.10.5 Assemble - - - - - - 

* 9.6.10.6 Install 2b - - - - - 

9.6.10.7 Adjust Recoil Track - - - - - - 

9.6.11 Ammunition Container Drive 

Shaft 

* 9.6.11.1 Remove 2b - - - - - 

9.6.11.2 Inspect - - - - - - 

* 9.6.11.3 Install 2b - - - - - 

9.6.12 Ballastic Chute Cover 

9.6.12.1 Remove - - - - - - 

9.6.12.2 Inspect - - - - - - 

9.6.12.3 Install - - - - - - 

9.6.13 Transfer Unit 

* 9.6.13.1 Remove 2b - - - - - 

9.6.13.2 Disassemble - - - - - - 

9.6.13.3 Inspect - - - - - - 

9.6.13.4 Repair - - - - - - 

9.6.13.5 Assemble - - - - - - 

* 9.6.13.6 Install 2b - - - - - 

9.6.14 Rounds Limit Switch 

9.6.14.1 Remove - - - - - - 

9.6.14.2 Install - - - - - - 

9.6.15 Last Round Switch 

9.6.15.1 Remove - - - - - - 

9.6.15.2 Install - - - - - - 

9.6.16 Gun Drive Shaft 

* 9.6.16.1 Remove 2b - - - - - 

9.6.16.2 Inspect - - - - - - 

* 9.6.16.3 Install 2b - - - - - 

9.6.17 Hydraulic Drive - - - - - - 

9.6.17.1 Remove - - - - - - 

9.6.17.2 Inspect - - - - - - 

9.6.17.3 Install - - - - - - 

9.6.18 Hydraulic Drive Unit Handle 

9.6.18.1 Remove - - - - - - 

9.6.18.2 Install - - - - - - 

9.6.19 Gun Safe Actuator 

9.6.19.1 Remove - - - - - - 

* 9.6.19.2 Inspect 2b - - - - - 

9.6.19.3 Install - - - - - - 

9.6.19.4 Adjust - - - - - - 

9.6.20 Gun Handling Adapter 

* 9.6.20.1 Inspect 2b - - - - - 

* 9.6.20.2 Use 2b - - - - - 

9.6.21 Ammunition Container 

Handling Adapter 

* 9.6.21.1 Inspect 2b - - - - - 

* 9.6.21.2 Use 2b - - - - - 


TR: TOs 35D30-4-10-1, 35D30-4-11- 

1, 35D30-4-15-1 

102 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



* 9.7.3 Use UALS 2b - - - - - 

9.7.4 Universal Ammunition 

Loading Systems (UALS) 

9.7.4.1 Drum 

9.7.4.1.1 Remove - - - - - - 

9.7.4.1.2 Disassemble - - - - - - 

9.7.4.1.3 Inspect - - - - - - 

9.7.4.1.4 Repair - - - - - - 

9.7.4.1.5 Assemble - - - - - - 

9.7.4.1.6 Install - - - - - - 

9.7.4.2 Conveyor Assembly 

9.7.4.2.1 Remove - - - - - - 

9.7.4.2.2 Disassemble - - - - - - 

9.7.4.2.3 Inspect - - - - - - 

9.7.4.2.4 Repair - - - - - - 

9.7.4.2.5 Assemble - - - - - - 

9.7.4.2.6 Install - - - - - - 


9.7.4.3.1 Remove - - - - - - 

9.7.4.3.2 Disassemble - - - - - - 

9.7.4.3.3 Inspect - - - - - - 

9.7.4.3.4 Repair - - - - - - 

9.7.4.3.5 Assemble - - - - - - 

9.7.4.3.6 Install - - - - - - 


Fixture 

9.7.4.4.1 Inspect - - - - - - 

9.7.4.4.2 Use - - - - - - 


Fixture 

9.7.4.5.1 Inspect - - - - - - 

9.7.4.5.2 Use - - - - - - 



9.7.4.6.1 Inspect - - - - - - 

9.7.4.6.2 Use - - - - - - 


Replenisher 

9.7.5.1 Nomenclature - - - - - - 


9.7.5.3 Disassemble - - - - - - 

9.7.5.4 Inspect - - - - - - 

9.7.5.5 Repair - - - - - - 

9.7.5.6 Assemble - - - - - - 

9.7.5.7 Use - - - - - - 


TR: IMIS, TOs 11B29-3-60-2, 11B29- 

3-61-2, 11L1-2-24-2, 16W6-56-2 

* 9.8.1 Description A - - - - - 


103 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 


9.8.4 Pylon 

* 9.8.4.1 Remove 2b - - - - - 

9.8.4.2 Disassemble - - - - - - 

9.8.4.3 Inspect - - - - - - 

9.8.4.4 Repair - - - - - - 

9.8.4.5 Assemble - - - - - - 

* 9.8.4.6 Install 2b - - - - - 

9.8.4.7 Perform Bench Check using 

TTU-584/E 

- - - - - - 

9.8.5 Pyrotechnic Arming Unit 

9.8.5.1 Remove - - - - - - 

9.8.5.2 Inspect - - - - - - 

9.8.5.3 Install - - - - - - 

9.8.6 LAU-141 (CRL) Launcher 

* 9.8.6.1 Remove 2b - - - - - 

9.8.6.2 Disassemble - - - - - - 

9.8.6.3 Inspect - - - - - - 

9.8.6.4 Repair - - - - - - 

9.8.6.5 Assemble - - - - - - 

* 9.8.6.6 Install 2b - - - - - 

* 9.8.6.7 Extend / Retract 2b - - - - - 

9.8.7 Trapeze Actuator 

* 9.8.7.1 Remove 2b - - - - - 

* 9.8.7.2 Install 2b - - - - - 

9.8.7.3 Inspect - - - - - - 

9.8.8 Forward / Aft Trapeze Arm 

* 9.8.8.1 Remove 2b - - - - - 

* 9.8.8.2 Install 2b - - - - - 

9.8.8.3 Inspect - - - - - - 

9.8.9 LAU-142 (AVEL) Launcher 

* 9.8.9.1 Remove 2b - - - - - 

9.8.9.2 Inspect - - - - - - 

* 9.8.9.3 Install 2b - - - - - 

* 9.8.9.4 Extend / Retract 2b - - - - - 

* 9.8.9.5 Service Accumulator 2b - - - - - 

9.8.10 BRU-46 Bomb Rack 

* 9.8.10.1 Remove 2b - - - - - 


* 9.8.10.3 Inspect B 2b - - - - - 

9.8.10.4 Repair - - - - - - 

* 9.8.10.5 Assemble B 2b - - - - - 

* 9.8.10.6 Install 2b - - - - - 

* 9.8.10.7 Perform Proofload Test 2b - - - - - 

* 9.8.10.8 Perform Bench Check using 

TTU-584/E or A/E24T-197 

Test Set 

2b - - - - - 

9.8.11 BRU-47 Bomb Rack 

9.8.11.1 Remove - - - - - - 

9.8.11.2 Disassemble - - - - - - 

9.8.11.3 Inspect - - - - - - 

104 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

9.8.11.4 Repair - - - - - - 

9.8.11.5 Assemble - - - - - - 

9.8.11.6 Install - - - - - - 

9.8.11.7 Perform Proofload Test - - - - - - 


TTU-584/E or A/E24T-197 

Test Set 

- - - - - - 

9.8.12 BRU-61 

9.8.12.1 Remove - - - - - - 

9.8.12.2 Disassemble - - - - - - 

9.8.12.3 Inspect - - - - - - 

9.8.12.4 Repair - - - - - - 

9.8.12.5 Assemble - - - - - - 

9.8.12.6 Install - - - - - - 


- - - - - - 



Inspections 

TR: IMIS 

9.9.1 Pylon - - - - - - 

9.9.2 LAU-141 - - - - - - 

9.9.3 LAU-142 - - - - - - 

9.9.4 BRU-46 - - - - - - 

9.9.5 BRU-47 - - - - - - 

9.9.6 BRU-61 - - - - - - 

9.9.7 Gun System - - - - - - 


TR: TOs 33D5-3-46-1, 33D5-3-50- 

1,33D5-3-50-4, 33D5-12-231-1,33D5- 

12-231-4, 33D5-16-72-1, 33D5-30-4- 

1, 33D5-53-13-1, 33D5-63-5-1, 33D5- 

63-5-4, 33D9-54-7-42 

9.10.1 Description - - - - - - 


9.10.2.1 Detent Tester - - - - - - 


* 9.10.2.3 TTU-584/E (COLT) A - - - - - 

* 9.10.2.4 TTU-584/E (COLT) 

Accessory Kit 

A - - - - - 

* 9.10.2.5 F-22 Test Programmable Set 

A - - - - - 

(TPS) 

* 9.10.2.6 A/E24T-197 Test Set A - - - - - 

9.10.2.7 AN/GYQ-79 (CMBRE) - - - - - - 


9.10.3.1 Detent Tester - - - - - - 


* 9.10.3.3 TTU-584/E (COLT) 1a - - - - - 

* 9.10.3.4 TTU-584/E (COLT) 

Accessory Kit 

1a - - - - - 

* 9.10.3.5 F-22 Test Programmable Set 

(TPS) 

1a - - - - - 

* 9.10.3.6 A/E24T-197 Test Set 1a - - - - - 

105 1 January 2012



Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

9.10.3.7 AN/GYQ-79 (CMBRE) - - - - - - 

9.10.4 Maintain - - - - - - 

9.10.4.1 Detent Tester - - - - - - 


9.10.4.3 TTU-584/E (COLT) - - - - - - 

9.10.4.4 TTU-584/E (COLT) 

Accessory Kit 

- - - - - - 

9.10.4.5 F-22 Test Programmable Set 

(TPS) 

- - - - - - 

9.10.4.6 A/E24T-197 Test Set - - - - - - 

9.10.4.7 AN/GYQ-79 (CMBRE) - - - - - - 

9.10.5 Repair 

9.10.5.1 Detent Tester - - - - - - 


9.10.5.3 TTU-584/E (COLT) - - - - - - 

9.10.5.4 TTU-584/E (COLT) 

Accessory Kit 

- - - - - - 

9.10.5.5 F-22 Test Programmable Set 

(TPS) 

- - - - - - 

9.10.5.6 A/E24T-197 Test Set - - - - - - 

9.10.5.7 AN/GYQ-79 (CMBRE) - - - - - - 


TR: IMIS, TOs 11L1-2-24-2, 11B29- 

3-60-2, 11B29-3-61-2 



Data 

1a - - - - - 

* 9.11.3 Use Schematic / Wiring 

Diagrams 

1a - - - - - 

9.11.4 Troubleshoot Circuits - - - - - - 

9.11.5 Retrieve Faults from Global 

Manager 

- - - - - - 

9.12 Aircraft Functional Checks 

with TTU-584/E 

TR: IMIS 

9.12.1 Pylon 2b - - - - - 

* 9.12.2 LAU-141 2b - - - - - 

* 9.12.3 LAU-142 2b - - - - - 

* 9.12.4 BRU-46 2b - - - - - 

* 9.12.5 Gun System - - - - - - 


TR: TOs 1-1M-33, 144000 



* 9.13.2.1 Load F 1b - - - - - 

* 9.13.2.2 Unload F 1b - - - - - 

106 1 January 2012



107 1 January 2012



Tasks 



Knowledge and Technical References A B A B C D E A B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 



10.1.1 Description - - - - - - 


TR: 35D3-2-25-1 

10.1.2.1 Inspect - - - - - - 

10.1.2.2 Operate - - - - - - 

10.1.2.3 Drive - - - - - - 


TR: 11-1-38 

10.1.3.1 Inspect - - - - - - 

10.1.3.2 Load / Unload - - - - - - 


10.1.4 Utility Trailers 

TR: 36-A11-18-3-1, 36-A11-18-3-4 

10.1.4.1 Inspect - - - - - - 

10.1.4.2 Maintain - - - - - - 

10.1.5 ADU-537A/E Missile 


TR: 35DA3-6-37-1 

10.1.5.1 Inspect - - - - - - 

10.1.5.2 Maintain - - - - - - 

10.1.5.3 Operate - - - - - - 


10.2.1 Aircraft Switches, Controls, 

- - - - - - 

10.2.2 


Aircraft Safety Devices - - - - - - 

10.2.3 Aircraft Danger Areas - - - - - - 



F - - - - - - 

10.2.5 Apply / Remove Aircraft 


- - - - - - 

10.2.6 Autonomic Logistics 

Information System (ALIS) 

10.2.6.1 Overview - - - - - - 

10.2.6.2 Components - - - - - - 

10.2.6.3 Operation - - - - - - 

10.2.6.4 Portable Maintenance Aid 

(PMA) 

10.2.6.4.1 Overview - - - - - - 

10.2.6.4.2 Connect / Disconnect - - - - - - 

10.2.6.4.3 Operate - - - - - - 


10.3.1 Nomenclature - - - - - - 

10.3.2 Function of Parts - - - - - - 

10.3.3 Theory of Operation - - - - - - 

10.3.4 Perform Safing and Clearing 

Procedures 

- - - - - - 

10.3.5 Malfunctions / Jams - - - - - - 

10.3.6 25mm Gun 

10.3.6.1 Nomenclature - - - - - - 

10.3.6.2 Function of Parts - - - - - - 

108 1 January 2012



Tasks 




C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

10.3.6.3 Cycle of Operation - - - - - - 

10.3.6.4 Remove - - - - - - 

10.3.6.5 Disassemble - - - - - - 

10.3.6.6 Inspect - - - - - - 

10.3.6.7 Repair - - - - - - 

10.3.6.8 Assemble - - - - - - 

10.3.6.9 Install - - - - - - 

10.3.6.10 Perform In-Shop Performance 

Check 

- - - - - - 


10.3.7.1 Remove - - - - - - 

10.3.7.2 Inspect - - - - - - 

10.3.7.3 Install - - - - - - 

10.3.8 Gun Assembly 

10.3.8.1 Remove - - - - - - 

10.3.8.2 Inspect - - - - - - 

10.3.8.3 Repair - - - - - - 

10.3.8.4 Lubricate - - - - - - 

10.3.8.5 Install - - - - - - 

10.3.9 Muzzle Clamp 

10.3.9.1 Remove - - - - - - 

10.3.9.2 Inspect - - - - - - 

10.3.9.3 Install - - - - - - 

10.3.10 Clevis Bolts 

10.3.10.1 Remove - - - - - - 

10.3.10.2 Inspect - - - - - - 

10.3.10.3 Install - - - - - - 

10.3.11 Arming Solenoid 

10.3.11.1 Remove - - - - - - 

10.3.11.2 Inspect - - - - - - 

10.3.11.3 Install - - - - - - 

10.3.12 Breech Bolt Assembly 

10.3.12.1 Remove - - - - - - 

10.3.12.2 Inspect - - - - - - 

10.3.12.3 Lubricate - - - - - - 

10.3.12.4 Install - - - - - - 

10.3.13 Safing / Firing Cam Assembly 

10.3.13.1 Remove - - - - - - 

10.3.13.2 Inspect - - - - - - 

10.3.13.3 Lubricate - - - - - - 

10.3.13.4 Install - - - - - - 

10.3.14 Container Assembly 

10.3.14.1 Remove - - - - - - 

10.3.14.2 Inspect - - - - - - 

10.3.14.3 Install - - - - - - 

10.3.15 Container Drive Shaft 

10.3.15.1 Remove - - - - - - 

10.3.15.2 Inspect - - - - - - 

10.3.15.3 Install - - - - - - 

10.3.16 Gun Drive Shaft 

10.3.16.1 Remove - - - - - - 

109 1 January 2012



Tasks 




C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

10.3.16.2 Inspect - - - - - - 

10.3.16.3 Install - - - - - - 

10.3.17 Muzzle Sleeve 

10.3.17.1 Remove - - - - - - 

10.3.17.2 Inspect - - - - - - 

10.3.17.3 Lubricate - - - - - - 

10.3.17.4 Install - - - - - - 

10.3.18 Transfer Unit 

10.3.18.1 Remove - - - - - - 

10.3.18.2 Inspect - - - - - - 

10.3.18.3 Repair - - - - - - 

10.3.18.4 Install - - - - - - 

10.3.19 Safing Solenoid 

10.3.19.1 Remove - - - - - - 

10.3.19.2 Inspect - - - - - - 

10.3.19.3 Install - - - - - - 

10.3.20 Lock/Unlock CAM 

10.3.20.1 Remove - - - - - - 

10.3.20.2 Inspect - - - - - - 

10.3.20.3 Install - - - - - - 

10.3.21 Upload/Download Interface 

10.3.21.1 Remove - - - - - - 

10.3.21.2 Inspect - - - - - - 

10.3.21.3 Install - - - - - - 

10.3.22 Sensor, Auto Safe 

10.3.22.1 Remove - - - - - - 

10.3.22.2 Inspect - - - - - - 

10.3.22.3 Install - - - - - - 

10.3.23 Hydraulic Drive Motor/ 

Gearbox Assembly 

10.3.23.1 Remove - - - - - - 

10.3.23.2 Inspect - - - - - - 

10.3.23.3 Install - - - - - - 

10.3.24 Inspect Gun Motion Sensor #1 - - - - - - 

10.3.25 Inspect Gun Motion Sensor #2 - - - - - - 

10.3.26 Actuator, Gun Gas Purge Door 

10.3.26.1 Remove - - - - - - 

10.3.26.2 Install - - - - - - 

10.3.27 Inspect Actuator Gun-Port 

Door 

- - - - - - 


10.3.28.1 Nomenclature - - - - - - 


10.3.28.3 25 mm Bulk Loader - - - - - - 

10.4 Power Thermal Management 

System (PTMS) 

- - - - - - 

10.5 Aircraft Actuated Doors 

10.5.1 Left Hand / Right Hand 

Weapons Bay Doors 

10.5.1.1 Manual Open / Close - - - - - - 

10.5.1.2 Hydraulic Open / Close - - - - - - 

110 1 January 2012



Tasks 




C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

10.5.2 Countermeasure Doors 

10.5.2.1 Open / Close Infrared 

Countermeasures Doors 

- - - - - - 

10.5.2.2 

(IRCM) 

Open / Close RFCM Doors - - - - - - 


(SMS) 

- - - - - - 


10.7.1 Description - - - - - - 

10.7.2 Theory of Operation - - - - - - 

10.7.3 Function of Parts - - - - - - 

10.7.4 Air-to-Ground Pylon 

10.7.4.1 Remove - - - - - - 

10.7.4.3 Inspect - - - - - - 

10.7.4.6 Install - - - - - - 

10.7.5 Air-to-Air Pylon 

10.7.5.1 Remove - - - - - - 

10.7.5.3 Inspect - - - - - - 

10.7.5.6 Install - - - - - - 

10.7.6 LAU-147 

10.7.6.1 Remove - - - - - - 

10.7.6.3 Inspect - - - - - - 

10.7.6.6 Install - - - - - - 

10.7.7 LAU-148 (Advanced Rail 

Launcher) 

10.7.7.1 Remove - - - - - - 

10.7.7.3 Inspect - - - - - - 

10.7.7.6 Install - - - - - - 

10.7.8 Alternate Advanced Rail 

Launcher 

10.7.8.1 Remove - - - - - - 

10.7.8.3 Inspect - - - - - - 

10.7.8.6 Install - - - - - - 

10.7.9 BRU-68 

10.7.9.1 Remove - - - - - - 

10.7.9.2 Inspect - - - - - - 

10.7.9.3 Install - - - - - - 

10.7.9.4 Reconfigure 

10.7.9.4.1 High in the Bay (HIB) - - - - - - 

10.7.9.4.2 Low in the Bay (LIB) - - - - - - 

10.7.9.4.3 SDB-1 - - - - - - 

10.7.9.4.4 B-61 - - - - - - 

10.7.10 Ordnance Quick Latches 

10.7.10.1 Remove - - - - - - 

10.7.10.2 Inspect - - - - - - 

10.7.10.3 Install - - - - - - 


10.7.11 Fuselage Remote Interface 

Unit (FRIU) 

10.7.11.1 Remove - - - - - - 

10.7.11.2 Install - - - - - - 

111 1 January 2012



Tasks 




C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

10.7.12 Missile Remote Interface Unit 

(MRIU) 

10.7.12.1 Remove - - - - - - 

10.7.12.2 Install - - - - - - 

10.7.13 Pneumatic Power System 

(PPS) 

10.7.13.1 Weapons Bay PPS 

10.7.13.1.1 Remove / Install Filter / 

- - - - - - 

Manifold 

10.7.13.1.2 Remove / Install PAO Cooling 

Plate 

- - - - - - 

10.7.13.1.3 Remove / Install Motor 

Compressor 

- - - - - - 

10.7.13.2 Air-to-Ground Pylon PPS 

10.7.13.2.1 Remove / Install ECU - - - - - - 

10.7.13.2.2 Remove / Install Filter - - - - - - 

10.7.13.2.3 Remove / Install Compressor - - - - - - 


10.8.1 Description - - - - - - 


10.8.2.1 Stray Voltage Tester - - - - - - 

10.8.2.2 Detent Tester - - - - - - 

10.8.2.3 Wrap Around Connectors Test 

Set 

- - - - - - 



10.8.3.2 Detent Tester - - - - - - 


Set 

- - - - - - 



10.8.4.2 Detent Tester - - - - - - 


Set 

- - - - - - 


10.9.1 Principles of Troubleshooting - - - - - - 

10.9.2 Use Fault Isolation Technical 

Data 

- - - - - - 

10.9.3 Use Schematic / Wiring 

Diagrams 

- - - - - - 


10.10 Airmunitions (see Matrix) 

10.10.1 Characteristics - - - - - - 


10.10.2.1 Load F - - - - - - 

10.10.2.2 Unload F - - - - - - 

112 1 January 2012



113 1 January 2012

AC-130H Aircraft 


Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier (1) Crse (2) 

Initials 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

11 AC-130H AIRCRAFT 


TR: TOs 11-1-38, 35C2-3-473-1, 

35C2-3-372-1, 35C2-3-469-2, 35C2-3- 

469-11, 35C2-3-469-12, 

35C2-3-469-14, 35D3-2-25-1, 35D5- 

3-8-31, 35F5-5-16-1 




* 11.1.2.1 Inspect 1b - - - - - 

* 11.1.2.2 Operate 1b - - - - - 

* 11.1.2.3 Drive 1b - - - - - 


TR: 36A11-18-3-1, 36A11-18-3-4 

11.1.3.1 Inspect - - - - - - 

11.1.3.2 Maintain - - - - - - 


* 11.1.4.1 Inspect 2b - - - - - 

* 11.1.4.2 Operate 2b - - - - - 


11.1.5.1 Inspect - - - - - - 

11.1.5.2 Operate - - - - - - 


11.1.6.1 Inspect - - - - - - 

11.1.6.2 Operate - - - - - - 

11.2 General Aircraft 


TR: TOs 1C-130(A)H-2-1, 1C- 

130(A)H-2-2, 11A-1-33 



- - - - - - 

* 11.2.2 Aircraft Safety Devices - - - - - - 

* 11.2.3 Aircraft Danger Areas - - - - - - 



F - - - - - - 



- - - - - - 


TR: TOs 1C-130(A)A-6, 1C-130(A)H- 

2-1, 1C-130(A)H-2-2, 1C-130(A)H-2- 

3, 1C-130(A)H-2-7, 1C-130(A)H-2- 

13, 1C-130(A)H-2-14, , 1C-130(A)- 

2-94JG-50-2-1, 11W1-15-15-2, 

11W1-25-2, 11W1-33-1-112, 11W1- 

33-1-122, 11W1-33-7-2, 11W1-33-8- 

2, 11W2-5-2-62, 11W2-5-2-64, 1-1- 

691, 1C-130(A)H-2- 94JG series 

11.3.1 40mm Gun System 

11.3.1.1 Nomenclature - - - - - - 


11.3.1.3 Gun 

* 11.3.1.3.1 Nomenclature A - - - - - 

* 11.3.1.3.2 Theory of Operation A - - - - - 

11.3.1.3.3 Perform Safing / Clearing F - - - - - - 

114 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 


Initials 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

11.3.1.3.4 Perform Pre-Flight Inspection - - - - - - 

11.3.1.3.5 Perform Post-Flight Inspection - - - - - - 

11.3.1.3.6 Remove B - - - - - - 

11.3.1.3.7 Disassemble B - - - - - - 

11.3.1.3.8 Clean / Inspect / Repair / 

Lubricate 

- - - - - - 

11.3.1.3.9 Assemble B - - - - - - 

11.3.1.3.10 Install B - - - - - - 

11.3.1.3.11 Perform Functional Check - - - - - - 

11.3.1.3.12 Barrel Erosion Inspection 

11.3.1.3.13 Barrel 

- - - - - - 

* 11.3.1.3.13.1 Remove 1b - - - - - 

* 11.3.1.3.13.2 Install 

11.3.1.3.14 Breech Ring 

1b - - - - - 

* 11.3.1.3.14.1 Remove 1b - - - - - 

* 11.3.1.3.14.2 Install 

11.3.1.3.15 Shroud 

1b - - - - - 

11.3.1.3.15.1 Remove - - - - - - 

11.3.1.3.15.2 Install 

11.3.1.3.16 Loader 

- - - - - - 

11.3.1.3.16.1 Nomenclature - - - - - - 

11.3.1.3.16.2 Theory of Operation - - - - - - 

* 11.3.1.3.16.3 Remove 1b - - - - - 

11.3.1.3.16.4 Disassemble - - - - - - 

11.3.1.3.16.5 Clean / Inspect / Repair / 

Lubricate 

- - - - - - 

11.3.1.3.16.6 Assemble - - - - - - 

* 11.3.1.3.16.7 Install 

11.3.1.3.17 Recoil Cylinder 

1b - - - - - 

11.3.1.3.17.1 Nomenclature - - - - - - 


* 11.3.1.3.17.3 Remove 1b - - - - - 

11.3.1.3.17.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

11.3.1.3.17.6 Assemble - - - - - - 

* 11.3.1.3.17.7 Install 

11.3.1.3.18 Firing Solenoid Assembly 

1b - - - - - 

11.3.1.3.18.1 Remove - - - - - - 

11.3.1.3.18.2 Install - - - - - - 

11.3.1.4 Trainable Gun Mount 

11.3.1.4.1 Nomenclature - - - - - - 

11.3.1.4.2 Theory of Operation - - - - - - 

11.3.1.4.3 Remove F - - - - - - 

11.3.1.4.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

11.3.1.4.6 Assemble - - - - - - 

11.3.1.4.7 Install F - - - - - - 


11.3.1.4.9 Perform Boresight - - - - - - 

115 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 


Initials 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

11.3.1.4.10 Elevation Synchronizer 

11.3.1.4.10.1 Remove - - - - - - 

11.3.1.4.10.2 Install - - - - - - 

11.3.1.4.11 Elevation Resolver 

11.3.1.4.11.1 Remove - - - - - - 

11.3.1.4.11.2 Install - - - - - - 

11.3.1.4.12 Azimuth Synchronizer 

11.3.1.4.12.1 Remove - - - - - - 

11.3.1.4.12.2 Install - - - - - - 

11.3.1.4.13 Azimuth Resolver 

11.3.1.4.13.1 Remove - - - - - - 

11.3.1.4.13.2 Install - - - - - - 

11.3.1.5 Pallet Assembly 

11.3.1.5.1 Remove - - - - - - 

11.3.1.5.2 Install - - - - - - 

11.3.1.6 Hydraulic Manifold Assembly 

11.3.1.6.1 Nomenclature - - - - - - 


11.3.1.6.3 Remove - - - - - - 

11.3.1.6.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

11.3.1.6.6 Assemble - - - - - - 

11.3.1.6.7 Install - - - - - - 

11.3.1.7 Shutoff Valve Assembly 

11.3.1.7.1 Remove - - - - - - 

11.3.1.7.2 Install - - - - - - 

11.3.1.8 Elevation Actuator 

11.3.1.8.1 Remove - - - - - - 

11.3.1.8.2 Install - - - - - - 

11.3.1.9 Azimuth Actuator 

11.3.1.9.1 Remove - - - - - - 

11.3.1.9.2 Install - - - - - - 

11.3.1.10 Aft Ammunition Rack 

11.3.1.10.1 Nomenclature - - - - - - 


11.3.1.10.3 Remove - - - - - - 

11.3.1.10.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

11.3.1.10.6 Assemble - - - - - - 

11.3.1.10.7 Install - - - - - - 

11.3.1.11 Interface Plate 

11.3.1.11.1 Remove - - - - - - 

11.3.1.11.2 Install - - - - - - 



11.3.2.2 Gun 




116 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 


Initials 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

11.3.2.2.3a Clear Malfunctions/Jams - - - - - - 



11.3.2.2.6 Remove B - - - - - - 

11.3.2.2.7 Disassemble B - - - - - - 


Lubricate 

- - - - - - 

11.3.2.2.9 Assemble B - - - - - - 

11.3.2.2.10 Install B - - - - - - 

11.3.2.2.11 Perform Bore/Video Scope 

Inspection 

- - - - - - 

11.3.2.2.12 Perform Gun Functional 

Check 

- - - - - - 

11.3.2.3 Hand Pump Assembly 

11.3.2.3.1 Nomenclature - - - - - - 


11.3.2.3.3 Remove - - - - - - 

11.3.2.3.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

11.3.2.3.6 Assemble - - - - - - 

11.3.2.3.7 Install - - - - - - 

11.3.2.4 Recoil Mechanism Assembly 

11.3.2.4.1 Remove - - - - - - 

11.3.2.4.2 Install - - - - - - 

11.3.2.4.3 Barrel Assembly 

11.3.2.4.3.1 Remove - - - - - - 

11.3.2.4.3.2 Install - - - - - - 


11.3.2.4.4.1 Remove - - - - - - 

11.3.2.4.4.2 Install - - - - - - 

11.3.2.4.5 Service Nitrogen - - - - - - 

11.3.2.4.6 Service Hydraulics - - - - - - 

11.3.2.5 Azimuth Servoactuator 

11.3.2.5.1 Remove - - - - - - 

11.3.2.5.2 Install - - - - - - 


11.3.2.6.1 Remove - - - - - - 

11.3.2.6.2 Install - - - - - - 

11.3.2.7 Firing Solenoid 

11.3.2.7.1 Remove - - - - - - 

11.3.2.7.2 Install - - - - - - 

11.3.2.8 Out-of-Battery Pump 

11.3.2.8.1 Remove - - - - - - 

11.3.2.8.2 Install - - - - - - 

11.3.2.9 Tube Retractor 

11.3.2.9.1 Remove - - - - - - 

11.3.2.9.2 Install - - - - - - 


11.3.2.10.1 Nomenclature - - - - - - 


117 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 


Initials 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

11.3.2.10.3 Remove F - - - - - - 

11.3.2.10.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

11.3.2.10.6 Assemble - - - - - - 

11.3.2.10.7 Install F - - - - - - 

11.3.2.10.8 Perform Trainable Gun Mount 

Functional Check 

- - - - - - 


11.3.2.11 Adapter Pallet (Skid Plate) 

11.3.2.11.1 Remove - - - - - - 

11.3.2.11.2 Install - - - - - - 

11.3.2.12 Elevation Resolver 

11.3.2.12.1 Remove - - - - - - 

11.3.2.12.2 Install - - - - - - 

11.3.2.13 Elevation Synchronizer 

11.3.2.13.1 Remove - - - - - - 

11.3.2.13.2 Install - - - - - - 

11.3.2.14 Azimuth Resolver 

11.3.2.14.1 Remove - - - - - - 

11.3.2.14.2 Install - - - - - - 

11.3.2.15 Azimuth Synchronizer 

11.3.2.15.1 Remove - - - - - - 

11.3.2.15.2 Install - - - - - - 


11.3.2.16.1 Remove - - - - - - 

11.3.2.16.2 Inspect - - - - - - 

11.3.2.16.3 Repair - - - - - - 

11.3.2.16.4 Install - - - - - - 

11.3.2.17 Shutoff Valve Assembly 

11.3.2.17.1 Remove - - - - - - 

11.3.2.17.2 Install - - - - - - 

11.3.2.18 Directional Control Valve 

Assembly 

11.3.2.18.1 Remove - - - - - - 

11.3.2.18.2 Install - - - - - - 

11.3.2.19 Ammunition Rack 

11.3.2.19.1 Nomenclature - - - - - - 


11.3.2.19.3 Remove - - - - - - 

11.3.2.19.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

11.3.2.19.6 Assemble - - - - - - 

11.3.2.19.7 Install - - - - - - 


Components 

11.4.1 Starrett Gauges 

11.4.1.1 Remove - - - - - - 

11.4.1.2 Inspect - - - - - - 

11.4.1.3 Install - - - - - - 

118 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 


Initials 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

11.4.1.4 Adjust - - - - - - 

11.4.2 Loaders Weapons Control 

Panel 

11.4.2.1 Remove - - - - - - 

11.4.2.2 Install - - - - - - 


11.4.3.1 Remove - - - - - - 

11.4.3.2 Install - - - - - - 

11.4.4 Fire Control Override Switch 

11.4.4.1 Remove - - - - - - 

11.4.4.2 Install - - - - - - 

11.4.5 Master Arm switch 

11.4.5.1 Remove - - - - - - 

11.4.5.2 Install - - - - - - 

11.4.6 Pilot’s Fire Control Switch 

11.4.6.1 Remove - - - - - - 

11.4.6.2 Install - - - - - - 


TR: TOs 11W1-15-13-2-1, , 33-1-19, 

36-1-58, 33A1-12-1198-1, 33A1-12- 

1300-1 

11.5.1 Description - - - - - - 



11.5.2.2 Nitrogen Servicing Gauge - - - - - - 

11.5.2.4 Optical Borescope - - - - - - 

11.5.2.6 TS-4485/ALM 288 Tester - - - - - - 





11.5.3.6 TS-4485/ALM 288 Tester - - - - - - 

11.5.4 Operate 




11.5.4.6 TS-4485/ALM 288 Tester - - - - - - 


TR: 1C-130(A)H-2-94FI series, 

1-1A-14 



Orders 

- - - - - - 

11.6.3 Use Schematics / Wiring 

Diagrams 

- - - - - - 


11.7 Special Tools 

TR: 35D-2-2, 1-1A-15, 11W1-15-13- 

2-1, 32-1-101, 36C-5-15-1 


11.7.1.1 Transfer Rail System - - - - - - 

11.7.1.2 Fork Adapter / Tines - - - - - - 

11.7.1.3 Crane Adapter - - - - - - 

119 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 


Initials 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

11.7.1.4 Maintenance Stands - - - - - - 

11.7.1.5 Crane Boom Extension 

Assembly 

- - - - - - 




11.7.2.3 Crane Adapter - - - - - - 

11.7.2.4 Maintenance Stands - - - - - - 

11.7.2.5 Crane Boom Extension 

Assembly 

- - - - - - 

11.8 Perform Phase Inspection - - - - - - 

11.9 Inspect / Operate 7.5 Ton 

Overhead Rail Crane 

- - - - - - 

11.10 Inspect / Use Cleaning Vat - - - - - - 


TR:TOs 1-1M-33, 1C-130E-33-1-2 


11.11.2 Chaff / Flare 

11.11.2.1 Inspect - - - - - - 

11.11.2.2 Load - - - - - - 

11.11.2.3 Unload - - - - - - 

11.11.3 Perform Hot Gun Response 

Procedures 

- - - - - - 

120 1 January 2012


121 1 January 2012

AC-130U Aircraft 


Tasks 




5 7 Level Tng Start Tng Done 

Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 

Initials Crse CDC Crse CDC Crse CDC 

12 AC-130U AIRCRAFT 


TR: TOs 11-1-38, 35C2-3-473-1, 

35C2-3-372-1, 35C2-3-469-2, 35C2- 

3-469-11, 35C2-3-469-12, 35C2-3- 

469-14, 35D3-2-25-1, 35D5-3-8-31, 

35F5-11-31, 35F5-5-16-1, 35F5-11-22 



* 12.1.2.1 Inspect 3b - - - - - 

* 12.1.2.2 Operate 3b - - - - - 

* 12.1.2.3 Drive 3b - - - - - 

12.1.3 MHU-83 Munitions Handling 

/ Loading Lift Truck 

* 12.1.3.1 Inspect 1b - - - - - 

* 12.1.3.2 Operate 1b - - - - - 

* 12.1.3.3 Drive 1b - - - - - 


TR: 36A11-18-3-1, 36A11-18-3-4 

12.1.4.1 Inspect - - - - - - 

12.1.4.2 Maintain - - - - - - 


* 12.1.5.1 Inspect 2b - - - - - 

* 12.1.5.2 Operate 2b - - - - - 


12.1.6.1 Inspect - - - - - - 

12.1.6.2 Operate - - - - - - 


12.1.7.1 Inspect - - - - - - 

12.1.7.2 Operate - - - - - - 



TR: TOs 1C-130(A)U-1-3, 1C- 

130(A)U-2-1, 1C-130(A)U-2-2, 1C- 

130(A)H-2- 94JG series, 1C- 

130(A)U-4-2 



- - - - - - 





F - - - - - - 



- - - - - - 


TR: TOs 1C-130(A)U-2-3, 1C- 

130(A)U-2-6, 1C-130(A)U-2-7, 1C- 

130(A)U-2-10-, 1C-130(A)U-2-13, 

1C-130(A)H-2- 94JG series , 1C- 

130(A)U-94FI-50-1, 1C-130(A)U- 

94GS-50-1, 1C-130(A)U-94SD-50-1, 

1C-130(A)U-94WD-50-1, 8C3-14- 

35-2, 11A1-33, 11W1-12-12-2, 

11W1-12-13-2, 11W1-15-13-2-1, 

11W1-15-13-2-1, 11W1-15-13-4, 

11W1-15-14-2, 11W1-15-14-4, 

11W1-15-15-2, 11W1-15-15-3, 

122 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


11W1-15-15-4, 11W1-15-16-2, 

11W1-15-16-3, 11W1-15-16-4, 

11W1-25-1, 11W1-33-6-2, 11W2-5- 

2-62, 11W2-5-2-64, 33D5-53-13-1, 

35D-30-4-17-1, 35D30-4-19-1, 36C3- 

5-15-1, TM9-4933-200-35, LCL 



12.3.1.2 Gun 



12.3.1.2.3 Perform Safing / Clearing - - - - - - 

12.3.1.2.4 Clear Malfunctions/Jams - - - - - - 



12.3.1.2.7 Remove - - - - - - 

12.3.1.2.8 Disassemble - - - - - - 

12.3.1.2.9 Clean / Inspect / Repair 

- - - - - - 

/Lubricate 

12.3.1.2.10 Assemble - - - - - - 

12.3.1.2.11 Install 

12.3.1.2.12 Firing Solenoid 

- - - - - - 

12.3.1.2.12.1 Remove - - - - - - 

12.3.1.2.12.2 Install - - - - - - 

12.3.1.2.13 Perform Barrel Erosion 

- - - - - - 

Inspection 

12.3.1.2.14 Performance Check In-Shop - - - - - - 

12.3.1.3 Ammunition Storage and 

Handling System 

12.3.1.3.1 Nomenclature - - - - - - 


12.3.1.3.3 Conveyor Assembly 

12.3.1.3.3.1 Nomenclature - - - - - - 


12.3.1.3.3.3 Remove - - - - - - 

12.3.1.3.3.4 Disassemble - - - - - - 


- - - - - - 

Lubricate 

12.3.1.3.3.6 Assemble - - - - - - 

12.3.1.3.3.7 Install - - - - - - 

12.3.1.3.3.8 Performance Check In-Shop - - - - - - 

12.3.1.3.4 Magazine 

12.3.1.3.4.1 Nomenclature - - - - - - 


12.3.1.3.4.3 Remove - - - - - - 

12.3.1.3.4.4 Disassemble - - - - - - 

12.3.1.3.4.5 Clean / Inspect / Repair 

- - - - - - 

Lubricate 

12.3.1.3.4.6 Assemble - - - - - - 

12.3.1.3.4.7 Install - - - - - - 


12.3.1.3.5 Magazine Transfer Unit 

(MTU) 

123 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.3.1.3.5.1 Nomenclature - - - - - - 


12.3.1.3.5.3 Remove - - - - - - 

12.3.1.3.5.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.3.5.6 Assemble - - - - - - 

12.3.1.3.5.7 Install - - - - - - 


12.3.1.3.6 Ammunition Loader / 

Downloader 

12.3.1.3.6.1 Nomenclature - - - - - - 


12.3.1.3.6.3 Remove - - - - - - 

12.3.1.3.6.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.3.6.6 Assemble - - - - - - 

12.3.1.3.6.7 Install - - - - - - 


12.3.1.3.7 Equilibrator 

12.3.1.3.7.1 Nomenclature - - - - - - 


12.3.1.3.7.3 Remove - - - - - - 

12.3.1.3.7.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.3.7.6 Assemble - - - - - - 

12.3.1.3.7.7 Install - - - - - - 


12.3.1.3.8 Flexible Drive Shaft 

12.3.1.3.8.1 Remove - - - - - - 

12.3.1.3.8.2 Install - - - - - - 

12.3.1.3.9 Gun Drive Gear Box 

12.3.1.3.9.1 Nomenclature - - - - - - 


12.3.1.3.9.3 Remove - - - - - - 

12.3.1.3.9.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.3.9.6 Assemble - - - - - - 

12.3.1.3.9.7 Install - - - - - - 


12.3.1.4 Gun Transfer Unit (GTU) 

12.3.1.4.1 Nomenclature - - - - - - 


12.3.1.4.3 Remove - - - - - - 

12.3.1.4.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.4.6 Assemble - - - - - - 

124 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.3.1.4.7 Install - - - - - - 


12.3.1.5 Magazine Hydraulic Drive 

Unit 

12.3.1.5.1 Nomenclature - - - - - - 


12.3.1.5.3 Remove - - - - - - 

12.3.1.5.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.5.6 Assemble - - - - - - 

12.3.1.5.7 Install - - - - - - 



12.3.1.6.1 Nomenclature - - - - - - 


12.3.1.6.3 Remove - - - - - - 

12.3.1.6.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 


12.3.1.6.7 Assemble - - - - - - 

12.3.1.6.8 Install - - - - - - 


12.3.1.7 Manual Hydraulic Drive 

Assembly 

12.3.1.7.1 Nomenclature - - - - - - 


12.3.1.7.3 Remove - - - - - - 

12.3.1.7.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.7.6 Assemble - - - - - - 

12.3.1.7.7 Install - - - - - - 



12.3.1.8.1 Remove - - - - - - 

12.3.1.8.2 Install - - - - - - 


12.3.1.9.1 Remove - - - - - - 

12.3.1.9.2 Install - - - - - - 

12.3.1.10 Elevation Servoactuator 

12.3.1.10.1 Remove - - - - - - 

12.3.1.10.2 Install - - - - - - 

12.3.1.11 Remove Gun System - - - - - - 

12.3.1.12 Install Gun System - - - - - - 

12.3.1.13 Perform Operation Readiness 

Inspection 

- - - - - - 

12.3.1.14 Perform Ammunition Storage 

and Handling System 


- - - - - - 

125 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.3.1.15 Perform Trainable Gun Mount 


- - - - - - 

12.3.1.16 Perform Boresight - - - - - - 

12.3.1.17 Perform Loading Operations 

with Ammunition Loading 

Assembly 

- - - - - - 

12.3.1.18 Perform Manual Loading 

Operations 

- - - - - - 

12.3.1.19 Ammunition Loading System 

12.3.1.19.1 Loader / Gun Interface 

Assembly 

12.3.1.19.1.1 Nomenclature - - - - - - 


12.3.1.19.1.3 Remove - - - - - - 

12.3.1.19.1.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.19.1.6 Assemble - - - - - - 

12.3.1.19.1.7 Install - - - - - - 

12.3.1.19.1.8 Performance Check In-Shop 

12.3.1.19.2 Loader Cradle Assembly 

- - - - - - 

12.3.1.19.2.1 Nomenclature - - - - - - 


12.3.1.19.2.3 Remove - - - - - - 

12.3.1.19.2.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.19.2.6 Assemble - - - - - - 

12.3.1.19.2.7 Install - - - - - - 


12.3.1.19.3 Fixed Chute Assembly 

- - - - - - 

12.3.1.19.3.1 Nomenclature - - - - - - 


12.3.1.19.3.3 Remove - - - - - - 

12.3.1.19.3.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.19.3.6 Assemble - - - - - - 

12.3.1.19.3.7 Install - - - - - - 


12.3.1.19.4 Loader / Can Interface Unit 

Assembly 

- - - - - - 

12.3.1.19.4.1 Nomenclature - - - - - - 


12.3.1.19.4.3 Remove - - - - - - 

12.3.1.19.4.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.19.4.6 Assemble - - - - - - 

12.3.1.19.4.7 Install - - - - - - 


126 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.3.1.19.5 Equibulator Jack Assembly 

12.3.1.19.5.1 Nomenclature - - - - - - 


12.3.1.19.5.3 Remove - - - - - - 

12.3.1.19.5.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.1.19.5.6 Assemble - - - - - - 

12.3.1.19.5.7 Install - - - - - - 


12.3.1.19.6 25mm Dust Boot 

- - - - - - 

12.3.1.19.6.1 Remove - - - - - - 

12.3.1.19.6.2 Inspect - - - - - - 

12.3.1.19.6.3 Install - - - - - - 



12.3.2.2 Gun 







12.3.2.2.6 Remove B - - - - - - 

12.3.2.2.7 Disassemble B - - - - - - 


Lubricate 

- - - - - - 

12.3.2.2.9 Assemble B - - - - - - 

12.3.2.2.10 Install B - - - - - - 


12.3.2.2.12 Barrel Erosion Inspection 

12.3.2.2.13 Barrel 

- - - - - - 

* 12.3.2.2.13.1 Remove 1b - - - - - 

* 12.3.2.2.13.2 Install 


1b - - - - - 

* 12.3.2.2.14.1 Remove 1b - - - - - 

* 12.3.2.2.14.2 Install 

12.3.2.2.15 Shroud 

1b - - - - - 

12.3.2.2.15.1 Remove - - - - - - 

12.3.2.2.15.2 Install 

12.3.2.2.16 Loader 

- - - - - - 

12.3.2.2.16.1 Nomenclature - - - - - - 


* 12.3.2.2.16.3 Remove 1b - - - - - 

12.3.2.2.16.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.2.2.16.6 Assemble - - - - - - 

* 12.3.2.2.16.7 Install 

12.3.2.2.17 Recoil Cylinder 

1b - - - - - 

12.3.2.2.17.1 Nomenclature - - - - - - 

127 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 



* 12.3.2.2.17.3 Remove 1b - - - - - 

12.3.2.2.17.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.2.2.17.6 Assemble - - - - - - 

* 12.3.2.2.17.7 Install 1b - - - - - 


12.3.2.3.1 Nomenclature - - - - - - 


12.3.2.3.3 Remove F - - - - - - 

12.3.2.3.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.2.3.5a Perform Boresight - - - - - - 

12.3.2.3.6 Assemble - - - - - - 

12.3.2.3.7 Install F - - - - - - 



12.3.2.4.1 Nomenclature - - - - - - 


12.3.2.4.3 Remove - - - - - - 

12.3.2.4.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.2.4.6 Assemble - - - - - - 

12.3.2.4.7 Install - - - - - - 


Assembly 

12.3.2.5.1 Nomenclature - - - - - - 


12.3.2.5.3 Remove - - - - - - 

12.3.2.5.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.2.5.6 Assemble - - - - - - 

12.3.2.5.7 Install - - - - - - 


Handling System 

12.3.2.6.1 Remove - - - - - - 

12.3.2.6.2 Inspect / Repair / Clean - - - - - - 

12.3.2.6.3 Install - - - - - - 


12.3.2.7.1 Remove - - - - - - 

12.3.2.7.2 Install - - - - - - 

12.3.2.8 Perform Boresight Operations - - - - - - 


12.3.2.9.1 Remove - - - - - - 

12.3.2.9.2 Install - - - - - - 


12.3.2.10.1 Remove - - - - - - 

128 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.3.2.10.2 Install - - - - - - 


12.3.2.11.1 Remove - - - - - - 

12.3.2.11.2 Install - - - - - - 

12.3.2.12 Remove System - - - - - - 

12.3.2.13 Install System - - - - - - 



12.3.3.2 Gun 







12.3.3.2.6 Remove B - - - - - - 

12.3.3.2.7 Disassemble B - - - - - - 


Lubricate 

- - - - - - 

12.3.3.2.9 Assemble B - - - - - - 

12.3.3.2.10 Install B - - - - - - 

12.3.3.2.11 Perform Borescope Inspection - - - - - - 

12.3.3.2.12 Perform Gun Functional 

Check 

- - - - - - 


Assembly 

12.3.3.3.1 Nomenclature - - - - - - 


12.3.3.3.3 Remove - - - - - - 

12.3.3.3.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.3.3.6 Assemble - - - - - - 

12.3.3.3.7 Install - - - - - - 

12.3.3.4 Recoil Mechanism Assembly 

12.3.3.4.1 Service Hydraulics - - - - - - 

12.3.3.4.2 Service Nitrogen - - - - - - 


12.3.3.5.1 Remove - - - - - - 

12.3.3.5.2 Install - - - - - - 


12.3.3.6.1 Remove - - - - - - 

12.3.3.6.2 Install - - - - - - 


12.3.3.7.1 Remove - - - - - - 

12.3.3.7.2 Install - - - - - - 


12.3.3.8.1 Remove - - - - - - 

12.3.3.8.2 Install - - - - - - 

12.3.3.9 Out-of-Battery Pump 

12.3.3.9.1 Remove - - - - - - 

129 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.3.3.9.2 Install - - - - - - 

12.3.3.10 Tube Retractor 

12.3.3.10.1 Remove - - - - - - 

12.3.3.10.2 Install - - - - - - 


12.3.3.11.1 Nomenclature - - - - - - 


12.3.3.11.3 Remove F - - - - - - 

12.3.3.11.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.3.11.5a Boresight - - - - - - 

12.3.3.11.6 Assemble - - - - - - 

12.3.3.11.7 Install F - - - - - - 

12.3.3.12 Perform Trainable Gun Mount 


- - - - - - 

12.3.3.13 Elevation Resolver 

12.3.3.13.1 Remove - - - - - - 

12.3.3.13.2 Install - - - - - - 

12.3.3.14 Safety Cage 

12.3.3.14.1 Remove - - - - - - 

12.3.3.14.2 Install - - - - - - 

12.3.3.15 Elevation Synchronizer 

12.3.3.15.1 Remove - - - - - - 

12.3.3.15.2 Install - - - - - - 


12.3.3.16.1 Remove - - - - - - 

12.3.3.16.2 Inspect - - - - - - 

12.3.3.16.3 Repair - - - - - - 

12.3.3.16.4 Install - - - - - - 


Handling System (ASHS) 

12.3.3.17.1 Nomenclature - - - - - - 


12.3.3.17.3 Remove - - - - - - 

12.3.3.17.4 Disassemble - - - - - - 


Lubricate 

- - - - - - 

12.3.3.17.6 Assemble - - - - - - 

12.3.3.17.7 Install - - - - - - 

12.3.3.18 Perform Boresight Operations - - - - - - 


Components 

TR: TOs 1C-130(A)U-2-1, 11W1-15- 

16-2, 11W1-15-16-3, 11W1-15-16-4-, 

11W1-33-6-2 

12.4.1 Manual Readout Assembly 

12.4.1.1 Remove - - - - - - 

12.4.1.2 Inspect - - - - - - 

12.4.1.3 Install - - - - - - 

12.4.1.4 Adjust - - - - - - 

130 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.4.2 Loaders Weapons Control 

Panel 

12.4.2.1 Remove - - - - - - 

12.4.2.2 Install - - - - - - 

12.4.3 Electronic Control Unit 

12.4.3.1 Remove - - - - - - 

12.4.3.2 Install - - - - - - 

12.4.4 Fire Control Override Switch 

12.4.4.1 Remove - - - - - - 

12.4.4.2 Repair - - - - - - 

12.4.4.3 Install - - - - - - 

12.4.5 Master Arm Switch 

12.4.5.1 Remove - - - - - - 

12.4.5.2 Repair - - - - - - 

12.4.5.3 Install - - - - - - 

12.4.6 Pilot’s Fire Control Switch 

12.4.6.1 Remove - - - - - - 

12.4.6.2 Install - - - - - - 

12.4.7 Hydraulic Power Panel 

12.4.7.1 Remove - - - - - - 

12.4.7.2 Repair - - - - - - 

12.4.7.3 Install - - - - - - 

12.4.8 Gun Relay Unit 

12.4.8.1 Remove - - - - - - 

12.4.8.2 Install - - - - - - 

12.4.9 Weapons Station Caution 

Light Panel 

12.4.9.1 Remove - - - - - - 

12.4.9.2 Repair - - - - - - 

12.4.9.3 Install - - - - - - 

12.4.10 Fire Control Panel 

12.4.10.1 Remove - - - - - - 

12.4.10.2 Install - - - - - - 

12.4.11 Gyro 

12.4.11.1 Remove - - - - - - 

12.4.11.2 Install - - - - - - 

12.4.12 Resolver 

12.4.12.1 Remove - - - - - - 

12.4.12.2 Install - - - - - - 


TR: TOs 11W1-15-13-2-1, 11W1-15- 

14-4, 36-1-58, 33-1-19, 33A1-12- 

1300-1, 33A1-12-1198-1, 33D5-53-1- 

111 

12.5.1 Description - - - - - - 



12.5.2.2 Sextant - - - - - - 


12.5.2.4 Breakout Box - - - - - - 

12.5.2.5 TS-4485/ALM 288 Tester - - - - - - 

131 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.5.2.6 Advanced Boresight 

Equipment (ABE) 

- - - - - - 



12.5.3.2 Sextant - - - - - - 


12.5.3.4 Breakout Box - - - - - - 

12.5.3.5 TS-4485/ALM 288 Tester - - - - - - 



- - - - - - 



12.5.4.2 Sextant - - - - - - 


12.5.4.4 Breakout Box - - - - - - 

12.5.4.5 TS-4485/ALM 288 Tester - - - - - - 



- - - - - - 

12.6 Fault Isolation 

TR: TOs 1-1A-14, 1C-130(A)U-94FI- 

50-1, 1C-130(A)U-94GS-50-1, 1C- 

130(A)U-94SD-50-1, 1C-130(A)U- 

94WD-50-1 

- - - - - - 



Orders 

- - - - - - 

12.6.3 Use Schematics / Wiring 

Diagrams 

- - - - - - 



TR: TOs 1-1A-15, 11W1-15-13-2-1, 

11W1-15-14-4, 33D30-4-17-1, 32-1- 

101, 36C3-5-15-1, 35D-1-2 




12.7.1.3 Crane Adapter - - - - - - 

12.7.1.4 ASHS Lifting Fixture - - - - - - 

12.7.1.5 ASHS Dolly Set - - - - - - 

12.7.1.6 Arm Safe Tool - - - - - - 

12.7.1.7 GFU-23/E 25 MM Loader - - - - - - 




12.7.2.3 Crane Adapter - - - - - - 

12.7.2.4 ASHS Lifting Fixture - - - - - - 

12.7.2.5 ASHS Dolly Set - - - - - - 

12.7.2.6 Arm Safe Tool - - - - - - 

12.7.2.7 GFU-23/E 25 MM Loader - - - - - - 

12.7.3 Ground Pressurization 

Maintenance Check 

12.7.3.1 Gun Pressurization Closeout 

Panel 

132 1 January 2012



Tasks 





Level 

C 

Trainee 

Initials 

D 

Trainer 

Initials 

E A B 

C 


Certifier (1) (2) (1) (2) (1) (2) 


12.7.3.1.1 Install - - - - - - 

12.7.3.1.2 Remove - - - - - - 

12.8 Perform Phase Inspection 

TR: TOs 1C-130(A)-6WC, OIs, LCLs 

- - - - - - 

12.9 Inspect / Operate 7.5 Ton 

Overhead Rail Crane 

- - - - - - 

12.10 Inspect / Use Cleaning Vat - - - - - - 


TR: TOs 1-1M-33, 1C-130E-33-1-2, 

11A1-33, 11A13-11-7, 11A13-13-7, 

11A13-16-7, 11A16-39-7, 11A15-41- 

7, 11A16-45-7 



12.11.2.1 Inspect - - - - - - 

12.11.2.2 Load - - - - - - 

12.11.2.3 Unload - - - - - - 

12.11.3 25mm Ammunition 

12.11.3.1 Inspect - - - - - - 

12.11.3.2 Load - - - - - - 

12.11.3.3 Unload - - - - - - 

12.11.3.4 Perform Hot Gun Response 

Procedures 

133 1 January 2012

CV-22 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

13 CV-22 

13.1 Aerospace Ground 

Equipment 



* 13.1.2.1 Inspect 2b - - - - - 

* 13.1.2.2 Operate 2b - - - - - 


13.1.3.1 Inspect - - - - - - 

13.1.3.2 Operate - - - - - - 


13.1.4.1 Inspect - - - - - - 

13.1.4.2 Operate - - - - - - 


13.2.1 Aircraft Switches, Controls, 

- - - - - - 

13.2.2 


Aircraft Safety Devices - - - - - - 

13.2.3 Aircraft Danger Areas - - - - - - 



F - - - - - - 



- - - - - - 

13.3 Portable Electronic Data 

Device (PEDD) Laptop 

13.3.1 Overview - - - - - - 

13.3.2 Operate - - - - - - 

13.4 Gun Systems 

TR: TOs 11W1-13-3-132, 11W1- 

13-5-2, 11W1-15-18-1, 11W2-6-5- 

1, 11W2-6-5-2 

* 13.4.1 Description A - - - - - 

13.4.2 A/A49E-16 Ramp Gun 

Mount Assembly 

13.4.2.1 Nomenclature - - - - - - 

13.4.2.2 Left/Right Outboard 

Modified Ramp Floor Panel 

Removal 

- - - - - - 

13.4.2.3 Removal - - - - - - 

13.4.2.4 Disassemble - - - - - - 

13.4.2.5 Clean/Inspect/Repair/ 

Lubricate 

- - - - - - 

13.4.2.6 Assemble - - - - - - 

13.4.2.7 Install - - - - - - 

13.4.2.8 Left/Right Outboard 

Modified Ramp Floor Panel 

Installation 

- - - - - - 

13.4.2.9 M240D Machine Gun 


* 13.4.2.9.2 Function of Parts A - - - - - 

* 13.4.2.9.3 Cycle of Operation A - - - - - 

* 13.4.2.9.4 Perform Safing and Clearing 

Procedures 

F 2b - - - - - 

134 1 January 2012

CV-22 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 


13.4.2.9.6 Remove B - - - - - - 

* 13.4.2.9.7 Disassemble B 2b - - - - - 

13.4.2.9.8 Clean - - - - - - 

13.4.2.9.9 Inspect B - - - - - - 

13.4.2.9.10 Repair - - - - - - 

13.4.2.9.11 Lubricate - - - - - - 

* 13.4.2.9.12 Assemble B 2b - - - - - 

* 13.4.2.9.13 Perform In-Shop 

FunctionalCheck 

1b - - - - - 

13.4.2.9.14 Perform Gun 

Malfunction/Jam Inspection 

- - - - - - 

13.4.2.9.15 Install B - - - - - - 

13.4.2.9.16 Perform Field-of-Fire Check - - - - - - 

13.4.2.10 GAU-18 (.50 Caliber) 

Machine Gun 





Procedures 

F 2b - - - - - 



* 13.4.2.10.7 Clean a - - - - - 

* 13.4.2.10.8 Inspect B 1b - - - - - 

13.4.2.10.9 Repair - - - - - - 

13.4.2.10.10 Lubricate - - - - - - 

* 13.4.2.10.11 Assemble B 2b - - - - - 

* 13.4.2.10.12 Perform Manual 

CheckoutIn-Shop 

1b - - - - - 

13.4.2.10.13 Perform Head Space / 

Timing Check 

- - - - - - 

* 13.4.2.10.14 Adjust Head Spacing and 

Timing 

1b - - - - - 

* 13.4.2.10.15 Perform Barrel Erosion 

Check 

1b - - - - - 

13.4.2.10.15 Back Plate Assembly 

* 13.4.2.10.15.1 Remove 2b - - - - - 

13.4.2.10.15.2 Disassemble - - - - - - 

13.4.2.10.15.3 Clean / Inspect / Repair - - - - - - 

13.4.2.10.15.4 Assemble - - - - - - 

* 13.4.2.10.15.5 Install 2b - - - - - 

13.4.2.10.16 Flash Suppresser 

13.4.2.10.16.1 Remove - - - - - - 

13.4.2.10.16.2 Clean / Inspect / Lubricate - - - - - - 

13.4.2.10.16.3 Install - - - - - - 

13.4.2.10.17 Link Chute Assembly 

13.4.2.10.17.1 Remove - - - - - - 

13.4.2.10.17.2 Disassemble - - - - - - 


13.4.2.10.17.4 Assemble - - - - - - 

135 1 January 2012

CV-22 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

13.4.2.10.17.5 Install - - - - - - 

13.4.2.10.17.6 Test - - - - - - 

13.4.2.10.18 MK-94 Recoil Adapter 

13.4.2.10.18.1 Removal of Gun from 

Adapter 

- - - - - - 

13.4.2.10.18.2 Disassemble - - - - - - 

13.4.2.10.18.3 Inspect / Service / Lubricate - - - - - - 

13.4.2.10.18.4 Assemble - - - - - - 

13.4.2.10.18.5 Installation of Gun to 

- - - - - - 

Adapter 

13.4.2.10.19 Spent Brass Hopper 

Assemblies 

13.4.2.10.19.1 Remove - - - - - - 


13.4.2.10.19.3 Install - - - - - - 

13.4.3 GAU-2 (7.62mm) Gatling 

Gun 

* 13.4.3.1 Nomenclature A - - - - - 

* 13.4.3.2 Function of Parts A - - - - - 

* 13.4.3.3 Cycle of Operation A - - - - - 

* 13.4.3.4 Perform Safing and Clearing 

3b - - - - - 

Procedures 

13.4.2.5 Clear Malfunctions/Jams - - - - - - 

13.4.3.6 Remove - - - - - - 

* 13.4.3.7 Disassemble 2b - - - - - 

* 13.4.3.8 Clean a - - - - - 

* 13.4.3.9 Inspect 1b - - - - - 

13.4.3.10 Repair - - - - - - 

13.4.3.11 Lubricate - - - - - - 

* 13.4.3.12 Assemble 2b - - - - - 

13.4.3.13 Perform In-Shop 

FunctionalCheck 

- - - - - - 

* 13.4.3.14 Perform Manual Checkout 

In-Shop 

2b - - - - - 

13.4.3.15 Perform Gun 

- - - - - - 

Malfunction/Jam Inspection 

13.4.3.16 Install - - - - - - 

13.4.3.17 Perform Field-of-Fire Check - - - - - - 

13.4.3.18 Flash Suppresser 

* 13.4.3.18.1 Remove 2b - - - - - 

13.4.3.18.2 Clean / Inspect / Lubricate - - - - - - 

* 13.4.3.18.3 Install 2b - - - - - 

13.4.3.19 Gun Drive Assembly 

* 13.4.3.19.1 Remove 2b - - - - - 

13.4.3.19.2 Disassemble - - - - - - 


- - - - - - 

Lubricate 

13.4.3.19.4 Assemble - - - - - - 

* 13.4.3.19.5 Install 2b - - - - - 

13.4.3.20. Dillon Feeder 

* 13.4.3.20.1 Remove 2b - - - - - 

136 1 January 2012

CV-22 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

13.4.3.20.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

13.4.3.20.4 Assemble - - - - - - 

* 13.4.3.20.5 Install 2b - - - - - 

13.4.3.20.6 Test - - - - - - 


13.5.1 An/ALM 288 Test Set 


- - - - - - 


Inspect 

- - - - - - 


Maintain 

- - - - - - 


13.6.1 Principles of 


- - - - - - 

13.6.2 Use Fault Isolation 

Technical Orders 

- - - - - - 

13.6.3 Use Schematic / Wiring 

Diagrams 

- - - - - - 


13.6.5 Identify Mechanical 

Malfunctions 

- - - - - - 


Inspection 

TR: TO 11W1-13-5-2, 11W2-6-5-1 

13.7.1 M240D Gun System - - - - - - 

13.7.2 GAU-18 Gun System - - - - - - 

13.7.3 GAU-2 Gun System - - - - - - 

13.8 Armory Procedures 

TR: AFI 31-101, DoD 5100.76, 

5100.2-R, OIs, LCLs 

13.8.1 Open / Close - - - - - - 

13.8.2 Alarm Test - - - - - - 

13.8.3 Duress System - - - - - - 

13.8.4 Inventory Procedures - - - - - - 

13.8.5 Weapons Loading / Clearing 

Procedures 

- - - - - - 

13.9 Aircraft Weapons Security / 

Deployed Weapons Security 

TR: AFI 31-101, DoD 5100.76, 

DoD 4160-21, DoD 4160-21-M-1 , 

OIs, LCLs 

13.9.1 Risk Categories - - - - - - 

13.9.2 Protection - - - - - - 

13.9.3 Weapons Movement - - - - - - 

13.9.4 Storage Requirement - - - - - - 

13.10 Airmunitions 

13.10.1 Characteristics - - - B - - 


TR: 12P3-2ALE-102 

13.10.2.1 Inspect - - - - - - 

13.10.2.2 Install - - - - - - 

137 1 January 2012

CV-22 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

13.10.2.3 Remove - - - - - - 

13.10.2.4 Stray Voltage Check with 

AN/ALM 288 Test Set 

- - - - - - 

138 1 January 2012


CV-22 

139 1 January 2012

HH-60 Helicopter 


Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

14 HH-60 HELICOPTER - - - - - - 


TR: TOs 34Y1-87-71, 35C2-3-469-1, 

35C2-3-473-1, 35C2-3-469-2, 35F5- 

5-11-31, 35F5-11-61, 35F5-5-16-1, 

35F5-5-20-1, 35C1-4-146-1, 35C2-3- 

372-11 



TR: 36A11-18-3-1, 36A11-18-3-4 

14.1.2.1 Inspect - - - - - - 

14.1.2.2 Maintain - - - - - - 


14.1.3.1 Inspect - - - - - - 

14.1.3.2 Operate - - - - - - 

14.1.4 MEP-360A (AGPU) 

14.1.4.1 Inspect - - - - - - 

14.1.4.2 Operate - - - - - - 


* 14.1.5.1 Inspect 2b - - - - - 

* 14.1.5.2 Operate 2b - - - - - 


14.1.6.1 Inspect - - - - - - 

14.1.6.2 Operate - - - - - - 

14.1.7 EPU-6/E Frequency Converter 

14.1.7.1 Inspect - - - - - - 

14.1.7.2 Operate - - - - - - 

14.1.8 B809A-72W Generator 

14.1.8.1 Inspect - - - - - - 

14.1.8.2 Operate - - - - - - 



TR: TOs 1H-60(H)G-2-1, 1H- 

60(H)G-2-1CL-3, 1H-60(H)G-33-1-2, 

11A1-1-33 



- - - - - - 





F - - - - - - 



F - - - - - - 

14.3 Gun Systems 

TR: TOs 1H-60(H)G-2-1, 1H- 

60(H)G-2-9, 1H-60(H)G-33-1-2CL-2, 

1H-60(H)G-112, 11W1-1-10, 11W1- 

13-3-132, 11A-1-33, 11W1-13-5-2, 

11W1-33-9-2, 11W2-6-5-1, 11W2-6- 

5-2, OIs, LCLs 

* 14.3.1 Description A - - - - - 

14.3.2 Electronic Control Unit 

* 14.3.2.1 Remove - - - - - - 

14.3.2.2 Disassemble - - - - - - 

14.3.2.3 Clean / Inspect / Repair - - - - - - 

140 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

14.3.2.4 Assemble - - - - - - 

* 14.3.2.5 Install - - - - - - 

14.3.2.6 Perform In-Shop Functional 

Check 

- - - - - - 

14.3.3 Gun System Control Panel 

14.3.3.1 Remove - - - - - - 

14.3.3.2 Disassemble - - - - - - 

14.3.3.3 Clean / Inspect / Repair - - - - - - 

14.3.3.4 Assemble - - - - - - 

14.3.3.5 Install - - - - - - 

14.3.3.6 Perform In-Shop Functional 

Check 

- - - - - - 

14.3.4 Pintle Arm Assembly 

14.3.4.1 Remove - - - - - - 

14.3.4.2 Clean / Inspect / Repair / 

Lubricate 

- - - - - - 

14.3.4.3 Install - - - - - - 

14.3.5 GAU-2 (7.62mm) Gun System 



* 14.3.5.3 Theory of Operation A - - - - - 

* 14.3.5.4 Perform Functional Check on 


F - - - - - - 


14.3.5.6 Perform Mechanical / 

Electrical Troubleshooting 

- - - - - - 

14.3.5.7 Clear Malfunctions / Jams - - - - - - 

14.3.5.8 GAU-2 Gatling Gun 



Procedures 

F 3b - - - - - 

* 14.3.5.8.3 Remove B 2b - - - - - 

14.3.5.8.4 Remove with Rotors Turning - - - - - - 


* 14.3.5.8.6 Clean a - - - - - 

* 14.3.5.8.7 Inspect B 1b - - - - - 

14.3.5.8.8 Repair - - - - - - 

14.3.5.8.9 Lubricate - - - - - - 

14.3.5.8.10 Modify - - - - - - 

* 14.3.5.8.11 Assemble B 2b - - - - - 

* 14.3.5.8.12 Install B 2b - - - - - 

14.3.5.8.13 Install with Rotors Turning - - - - - - 

* 14.3.5.8.14 Perform Manual Checkout In- 

Shop 

2b - - - - - 

14.3.5.9 Clutch Assembly 

14.3.5.9.1 Remove - - - - - - 

14.3.5.9.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.5.9.4 Assemble - - - - - - 

14.3.5.9.5 Install - - - - - - 

14.3.5.10 Flash Suppresser 

141 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 14.3.5.10.1 Remove 2b - - - - - 


Lubricate 

- - - - - - 

* 14.3.5.10.3 Install 2b - - - - - 

14.3.5.11 Gun Drive Assembly 

* 14.3.5.11.1 Remove 2b - - - - - 

14.3.5.11.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.5.11.4 Assemble - - - - - - 

* 14.3.5.11.5 Install 2b - - - - - 

14.3.5.11.6 Test - - - - - - 

14.3.5.12 Gun Control Unit 

14.3.5.12.1 Remove - - - - - - 

14.3.5.12.2 Disassemble - - - - - - 

14.3.5.12.3 Clean / Inspect / Repair - - - - - - 

14.3.5.12.4 Assemble - - - - - - 

14.3.5.12.5 Install - - - - - - 

14.3.5.12.6 Test - - - - - - 

14.3.5.13 Hand Grip Housing 

14.3.5.13.1 Remove - - - - - - 


14.3.5.13.3 Install - - - - - - 

14.3.5.14 Yoke Assembly 

14.3.5.14.1 Remove - - - - - - 

14.3.5.14.2 Disassemble - - - - - - 

14.3.5.14.3 Clean / Inspect / Repair/ 

Lubricate 

- - - - - - 

14.3.5.14.4 Assemble - - - - - - 

14.3.5.14.5 Install - - - - - - 

14.3.5.15 Dillon Feeder 

* 14.3.5.15.1 Remove 2b - - - - - 

14.3.5.15.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.5.15.4 Assemble - - - - - - 

* 14.3.5.15.5 Install 2b - - - - - 

14.3.5.15.6 Test - - - - - - 

14.3.5.16 Gun Mount Assembly 

14.3.5.16.1 Remove - - - - - - 

14.3.5.16.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.5.16.4 Assemble - - - - - - 

14.3.5.16.5 Install - - - - - - 

14.3.5.17 7.62mm Ammunition 

Magazine Assembly 

14.3.5.17.1 Remove - - - - - - 

14.3.5.17.2 Disassemble - - - - - - 


14.3.5.17.4 Assemble - - - - - - 

14.3.5.17.5 Install - - - - - - 

142 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

14.3.5.18 7.62mm Booster Motor 

Assembly 

14.3.5.18.1 Remove - - - - - - 

14.3.5.18.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.5.18.4 Modify - - - - - - 

14.3.5.18.5 Assemble - - - - - - 

14.3.5.18.6 Install - - - - - - 

14.3.5.19 Ammunition Feed Chute 

14.3.5.19.1 Remove - - - - - - 

14.3.5.19.2 Disassemble - - - - - - 

14.3.5.19.3 Clean / Inspect / Repair/ 

Lubricate 

- - - - - - 

14.3.5.19.4 Assemble - - - - - - 

14.3.5.19.5 Install - - - - - - 

14.3.5.19.6 Test - - - - - - 

14.3.5.20 Brass Eject Chute Hose 

14.3.5.20.1 Remove - - - - - - 


14.3.5.20.3 Install - - - - - - 

14.3.5.21 Pintle Post Assembly 

14.3.5.21.1 Remove - - - - - - 

14.3.5.21.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.5.21.4 Assemble - - - - - - 

14.3.5.21.5 Install - - - - - - 

14.3.5.22 Wiring Harness 

14.3.5.22.1 Remove - - - - - - 


14.3.5.22.3 Install - - - - - - 

14.3.6 GAU-18 (.50 Caliber) Gun 

System 




* 14.3.6.4 Perform Functional Check on 


F - - - - - - 


14.3.6.6 Perform Mechanical / 

Electrical Troubleshooting 

- - - - - - 


14.3.6.8 GAU-18 Machine Gun 



Procedures 

2b - - - - - 

* 14.3.6.8.3 Remove 2b - - - - - 

14.3.6.8.4 Remove with Rotors Turning - - - - - - 

* 14.3.6.8.5 Disassemble 2b - - - - - 

* 14.3.6.8.6 Clean a - - - - - 

* 14.3.6.8.7 Inspect 1b - - - - - 

143 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

14.3.6.8.8 Repair - - - - - - 

14.3.6.8.9 Lubricate - - - - - - 

14.3.6.8.10 Modify - - - - - - 

* 14.3.6.8.11 Assemble 2b - - - - - 

* 14.3.6.8.12 Install 2b - - - - - 

14.3.6.8.13 Install with Rotors Turning - - - - - - 

* 14.3.6.8.14 Perform Manual Checkout In- 

Shop 

1b - - - - - 

* 14.3.6.8.15 Perform Head-Space / Timing 

Check/ Adjustment 

1b - - - - - 

* 14.3.6.8.16 Perform Barrel Erosion Check 1b - - - - - 

14.3.6.9 Back Plate Assembly 

* 14.3.6.9.1 Remove 2b - - - - - 

14.3.6.9.2 Disassemble - - - - - - 


14.3.6.9.4 Modify - - - - - - 

14.3.6.9.5 Assemble - - - - - - 

* 14.3.6.9.6 Install 2b - - - - - 

14.3.6.10 Flash Suppressor 

14.3.6.10.1 Remove - - - - - - 

14.3.6.10.2 Clean / Inspect / Lubricate - - - - - - 

14.3.6.10.3 Install - - - - - - 

14.3.6.11 Link Ejection Chute Assembly 

14.3.6.11.1 Remove - - - - - - 

14.3.6.11.2 Disassemble - - - - - - 


14.3.6.11.4 Assemble - - - - - - 

14.3.6.11.5 Install - - - - - - 

14.3.6.11.6 Test - - - - - - 

14.3.6.12 Feed Chute Adapter 

14.3.6.12.1 Remove - - - - - - 

14.3.6.12.2 Disassemble - - - - - - 


14.3.6.12.4 Assemble - - - - - - 

14.3.6.12.5 Install - - - - - - 

14.3.6.13 GAU-18 (Modified) Gun 

Yoke / Cradle Assembly 

14.3.6.13.1 Remove - - - - - - 

14.3.6.13.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.6.13.4 Assemble - - - - - - 

14.3.6.13.5 Install - - - - - - 

14.3.6.14 Rigid Spent Brass Chute 

14.3.6.14.1 Remove - - - - - - 

14.3.6.14.2 Disassemble - - - - - - 


14.3.6.14.4 Assemble - - - - - - 

14.3.6.14.5 Install - - - - - - 

14.3.6.15 Brass Eject Chute Hose - - - - - - 

14.3.6.15.1 Remove - - - - - - 


144 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

14.3.6.15.3 Install - - - - - - 

14.3.6.16 Grip Assembly 

14.3.6.16.1 Remove - - - - - - 

14.3.6.16.2 Disassemble - - - - - - 


14.3.6.16.4 Assemble - - - - - - 

14.3.6.16.5 Install - - - - - - 

14.3.6.17 Ammunition Feed Chute 

14.3.6.17.1 Remove - - - - - - 

14.3.6.17.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.6.17.4 Assemble - - - - - - 

14.3.6.17.5 Install - - - - - - 

14.3.6.17.6 Test - - - - - - 

14.3.6.18 .50 Cal Ammunition 

Magazine Assembly 

14.3.6.18.1 Remove - - - - - - 

14.3.6.18.2 Disassemble - - - - - - 


14.3.6.18.4 Assemble - - - - - - 

14.3.6.18.5 Install - - - - - - 

14.3.6.19 .50 Cal Booster 

Housing/Motor Assembly 

14.3.6.19.1 Remove - - - - - - 

14.3.6.19.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.6.19.4 Assemble - - - - - - 

14.3.6.19.5 Install - - - - - - 


14.3.6.20.1 Remove - - - - - - 

14.3.6.20.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.6.20.4 Assemble - - - - - - 

14.3.6.20.5 Install - - - - - - 

14.3.6.21 Wiring Harness 

14.3.6.21.1 Remove - - - - - - 


14.3.6.21.3 Install - - - - - - 

14.3.7 M240D Machine Gun System 


* 14.3.7.2 Function of Parts A - - - - 


* 14.3.7.4 Perform Field-of-Fire Check 2b - - - - - 

* 14.3.7.5 Perform Mechanical 


2b - - - - - 


14.3.7.7 M240D Machine Gun 



145 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 14.3.7.7.3 Perform Safing and Clearing 2b - - - - - 

* 14.3.7.7.4 Remove 2b - - - - - 

* 14.3.7.7.5 Disassemble 2b - - - - - 


Lubricate 

- - - - - - 

* 14.3.7.7.7 Assemble 2b - - - - - 

* 14.3.7.7.8 Install 2b - - - - - 

* 14.3.7.7.9 Perform In-Shop Functional 

Check 

1b - - - - - 

14.3.7.7.10 Perform Loose Rivet Check - - - - - - 

14.3.7.8 Ammunition Can Bracket, 

Spent Brass Bag, and 

Collector Assembly 

14.3.7.8.1 Remove - - - - - - 

14.3.7.8.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.7.8.4 Assemble - - - - - - 

14.3.7.8.5 Install - - - - - - 

14.3.7.9 Cradle Assembly 

14.3.7.9.1 Remove from Mount Arm - - - - - - 

14.3.7.9.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.7.9.4 Assemble - - - - - - 

14.3.7.9.5 Install on Mount Arm - - - - - - 

14.3.7.10 Mounting Arm 

14.3.7.10.1 Remove - - - - - - 

14.3.7.10.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.7.10.4 Assemble - - - - - - 

14.3.7.10.5 Install - - - - - - 


14.3.7.11.1 Remove - - - - - - 

14.3.7.11.2 Disassemble - - - - - - 


Lubricate 

- - - - - - 

14.3.7.11.4 Assemble - - - - - - 

14.3.7.11.5 Install - - - - - - 


TR: TOs 33D7-13-228-1 

14.4.1 Description - - - - - - 


14.4.2.1 TS-4485/288 Tester - - - - - - 


14.4.3.1 TS-4485/288 Tester - - - - - - 


14.4.4.1 TS-4485/288 Tester - - - - - - 


TR: TOs 1H-60(H)G-2-9, 1H- 

60(H)G-112, 11W1-13-3-132, 11W1- 

13-5-2, 11W1-33-9-2 

146 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 14.5.1 Principles of Troubleshooting - - - - - - 


Orders 

- - - - - - 


Diagrams 

- - - - - - 


14.5.5 Identify Mechanical 

Malfunctions 

- - - - - - 


TR: TOs 30-10-13, 32-1-101, 32-1- 

151, 32-1-201, 32B14-3-1-101, 

11W1-13-5-2, 11W1-33-9-2, 11W1- 

13-3-132, 11W2-6-5-1, 11W2-6-5-2 

14.6.1 Dillon Bolt Assembly/Fixture 

14.6.2 .50 Caliber Head Space Gauge 

14.6.3 .50 Caliber Timing Gauge 

14.6.4 .50 Caliber Barrel Erosion 

Gauge 

14.6.5 .50 Caliber Oil Buffer 

Compression Tool 

14.6.6 .50 Caliber Combo Wrench 

14.6.7 .50 Caliber Firing Pin Hole 

Gauge 

14.6.8 .50 Caliber Firing Pin 

Protrusion Gauge 

14.6.9 .50 Caliber Firing Pin 

Extractor Tool 

14.6.10 M7 Linker / Delinker Tool 

14.6.11 Ruptured Case Extractor 

14.6.12 M240D Headspace Warning 

Gauge 

14.6.13 M240D Breech Bore Erosion 

Gauge 

14.6.14 M240D Firing Pin Protrusion 

Gauge 

14.6.15 M240D Muzzle and Breech 

Bore Wear Gauge 

14.6.16 M240D Scraper and Extractor 

Tool 

14.6.17 M240D Headspace Reject 

Tool 

14.6.18 M240D Gas Port Erosion Tool 

14.6.19 M240D Combination Scraper 

Regulator Tool 

14.6.20 M240D Reamer 

14.6.21 GAU-2 Loading Sector 

14.6.22 Small Arms Cleaning Kit 


TR: TO 35C2-2-31-61, Manufactures 

Catalog 

14.7.1 Use Generator / Rectifier In- 

Shop 

- - - - - - 

14.7.2 Inspect / Use/ Maintain Jet 

Washer / Cleaning Vat 

- - - - - - 

147 1 January 2012



Tasks 




B 

C 


5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 


Inspection 

TR: TOs 1H-60(H)G-6, OIs, LCLs 

14.8.1 GAU-2 Gun System - - - - - - 

14.8.2 GAU-18 Gun System - - - - - - 

14.8.3 M240D Gun System - - - - - - 

14.9 Armory Procedures 

TR: AFI 31-101, DoD 5100.76, 

5100.2-R, OIs, LCLs 

14.9.1 Open / Close - - - - - - 

14.9.2 Alarm Test - - - - - - 

14.9.3 Duress System - - - - - - 

14.9.4 Inventory Procedures - - - - - - 

14.9.5 Weapons Loading / Clearing 

Procedures 

- - - - - - 

14.10 Aircraft Weapons Security / 

Deployed Weapons Security 

TR: AFI 31-101, DoD 5100.76, DoD 

4160-21, DoD 4160-21-M-1 , OIs, 

LCLs 

14.10.1 Risk Categories - - - - - - 

14.10.2 Protection - - - - - - 

14.10.3 Weapons Movement - - - - - - 

14.10.4 Storage Requirement - - - - - - 


TR: TO 1H-60(H)G-33-1-2, 11A1-33, 

11A16-39-7, 11A16-45-7, 11A18-10- 

7, LCLs 



14.11.2.1 Inspect - - - - - - 

14.11.2.2 Install - - - - - - 

14.11.2.3 Remove - - - - - - 

14.11.2.4 Stray Voltage Check - - - - - - 

14.11.3 Hoist Guillotine Cartridges 

14.11.3.1 Remove - - - - - - 

14.11.3.2 Inspect - - - - - - 

14.11.3.3 Install - - - - - - 

14.11.3.4 Stray Voltage Check, Rescue 

Hoist, Cargo Hook 

- - - - - - 

14.11.4 Crew Served Markers / Flares 

14.11.4.1 Inspect - - - - - - 

148 1 January 2012



149 1 January 2012

MQ-1 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

15 MQ-1 


TR: TO 11-1-38, 35D3-2-25-1, 35D3- 

2-27-1, 35D3-9-23-1, 35D5-3-8-31, 

35F5-5-11-31, 35F5-5-11-22, 35F5-5- 

16-1, 35F5-11-61 



* 15.1.2.1 Inspect 3b - - - - - 

* 15.1.2.2 Operate 3b - - - - - 

* 15.1.2.3 Drive 3b - - - - - 


15.1.3.1 Inspect - - - - - - 

15.1.3.2 Load / Unload - - - - - - 



TR: 36A11-18-3-1, 36A11-18-3-4 

15.1.4.1 Inspect - - - - - - 

15.1.4.2 Maintain - - - - - - 


15.1.5.1 Inspect - - - - - - 

15.1.5.2 Operate - - - - - - 


15.1.6.1 Inspect - - - - - - 

15.1.6.2 Operate - - - - - - 


TR: 1Q-1(M)B-2-05JG-00-1, 1Q- 

1(R)B2-3-12-1, 1Q-1(R)B-2-4 

* 15.2.1 Concept of Operation A - - - - - 

* 15.2.2 Security Precautions A - - - - - 





B - - - - - 

* 15.2.6 Aircraft Safe for Maintenance F 2b - - - - - 

15.2.7 Single Bay Station (SBS) 

15.2.7.1 Power Initialization - - - - - - 

15.2.7.2 Power Down - - - - - - 

15.2.8 Ruggedized Aircraft 

Maintenance Test Stand 

(RAMTS) 


15.2.8.2 Power Down - - - - - - 

15.2.9 Ground Control Station 


15.2.9.2 Power Down - - - - - - 

15.2.10 28V DC Power Supply 

(Sorensen) 


15.2.10.2 Power Down - - - - - - 

15.3 Weapons Release System 

TR: 1Q-1(M)B-2-94GS-00-1, 1Q- 

1(M)B-2-94JG-00-1, 1Q-1(M)B-2- 

05JG-00-1 

150 1 January 2012

MQ-1 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 15.3.1 Armament Systems Overview B - - - - - 

* 15.3.2 Armament System Safety 

Hazards 

B - - - - - 


TR: 1Q-1(M)B-2-05JG-00-1, 1Q- 

1(M)B-2-94GS-00-1, 1Q-1(M)B-2- 

94JG-00-1, 1Q-1(M)B-2-94JG-30-1, 

11B29-3-8-3 

* 15.4.1 Description B - - - - - 



15.4.4 Weapons Pylon - - - - - - 

15.4.4.1 Remove - - - - - - 

15.4.4.2 Disassemble - - - - - - 

15.4.4.3 Inspect - - - - - - 

15.4.4.4 Repair - - - - - - 

15.4.4.5 Assemble - - - - - - 

15.4.4.6 Install - - - - - - 

15.4.5 Universal Stores Pylon (USP) 

15.4.5.1 Remove - - - - - - 

15.4.5.2 Disassemble - - - - - - 

15.4.5.3 Inspect - - - - - - 

15.4.5.4 Repair - - - - - - 

15.4.5.5 Assemble - - - - - - 

15.4.5.6 Install - - - - - - 

15.4.6 MA-4B Bomb Rack 

15.4.6.1 Remove - - - - - - 

15.4.6.2 Disassemble B - - - - - - 

15.4.6.3 Inspect B - - - - - - 

15.4.6.4 Repair - - - - - - 

15.4.6.5 Assemble B - - - - - - 

15.4.6.6 Install - - - - - - 

15.4.6.7 Perform Bench Check - - - - - - 


15.4.7 M299 Launcher 

* 15.4.7.1 Remove 2b - - - - - 

15.4.7.2 Disassemble - - - - - - 

15.4.7.3 Inspect - - - - - - 

15.4.7.4 Repair - - - - - - 

15.4.7.5 Assemble - - - - - - 

* 15.4.7.6 Install 2b - - - - - 

15.4.7.6 Perform Weapons System 

Confidence Check 

- - - - - - 

15.4.8 Perform Basic Post-Flight 

Inspections 

- - - - - - 


Components 

TR: 1Q-1(M)B-2-05JG-00-1, 1Q- 

1(M)B-2-94GS-00-1, 1Q-1(M)B-2- 

94JG-00-1, 1Q-1(M)B-2-94JG-10-1 

15.5.1 AGM-114 Electronics 

Assembly (AEA) 

* 15.5.1.1 Remove 2b - - - - - 

151 1 January 2012

MQ-1 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 15.5.1.2 Install 2b - - - - - 

15.5.1.3 Reprogram - - - - - - 


TR: 1Q-1(M)B-2-05JG-00-1, 1Q- 

1(M)B-2-94JG-00-1 

* 15.6.1 Description A - - - - - 


TR: 1Q-1(M)B-2-05JG-10-1 

15.6.2.1 A/N-AWM-101A Tester - - - - - - 


15.6.3.1 A/N-AWM-101A Tester - - - - - - 


15.6.4.1 A/N-AWM-101A Tester - - - - - - 

15.6.5 Repair 

15.6.5.1 A/N-AWM-101A Tester - - - - - - 


TR: 1Q-1(M)B-2-94FI-00-1, 1Q- 

1(M)B-2-94WD/SD-1, 1Q-1(M)B-2- 

94JG-00-1, 1Q-1(M)B-2-05JG-00-1 



Orders 

1a - - - - - 


Diagrams 

1a - - - - - 



TR: 1Q-1(M)B-33-2-1, 1Q-1(M)B-33- 

2-1CL-1, 1Q-1(M)B-2-05JG-00-1 



* 15.8.2.1 Load F 2b - - - - - 

* 15.8.2.2 Unload F 2b - - - - - 

152 1 January 2012


MQ-1 

153 1 January 2012

MQ-9 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

16 MQ-9 


TR: TOs: 11-1-38, 35D3-2-25-1, 

35D3-2-27-1, 35D3-9-23-1, 35D5-3-8- 

31, 35DA3-6-37-1, 35F5-5-11-31, 

35F5-5-11-22, 35F5-5-16-1, 35F5-11- 

61 



* 16.1.2.1 Inspect 3b - - - - - 

* 16.1.2.2 Operate 3b - - - - - 

* 16.1.2.3 Drive 3b - - - - - 

16.1.3 MHU-83Munitions Handling / 


* 16.1.3.1 Inspect 1b - - - - - 

* 16.1.3.2 Operate 1b - - - - - 

* 16.1.3.3 Drive 1b - - - - - 

16.1.4 ADU-537A/E Missile 

Munition Loading Adapter 

16.1.4.1 Inspect - - - - - - 

16.1.4.2 Operate - - - - - - 

16.1.4.3 Maintain - - - - - - 


16.1.5.1 Inspect - - - - - - 

16.1.5.2 Load / Unload - - - - - - 



TR: 36A11-18-3-1, 36A11-18-3-4 

16.1.6.1 Inspect - - - - - - 

16.1.6.2 Maintain - - - - - - 


16.1.7.1 Inspect - - - - - - 

16.1.7.2 Operate - - - - - - 


16.1.8.1 Inspect - - - - - - 

16.1.8.2 Operate - - - - - - 


TR: 1Q-9(M)A-2DB-1: 05GS-00-1; 

05JG-00-1; 05JG-10-1 

* 16.2.1 Concept of Operation A - - - - - 

* 16.2.2 Security Precautions A - - - - - 





B - - - - - 

* 16.2.6 Aircraft Safe for Maintenance F 2b - - - - - 

16.2.7 Single Bay Station (SBS) 

* 16.2.7.1 Power Initialization - - - - - - 

* 16.2.7.2 Power Down - - - - - - 

16.2.8 Ruggedized Aircraft 

Maintenance Test Stand 

(RAMTS) 

16.2.8.1 Power Initialization 2b - - - - - 

154 1 January 2012

MQ-9 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

16.2.8.2 Power Down 2b - - - - - 

16.2.9 Ground Control Station 


16.2.9.2 Power Down - - - - - - 

16.2.10 28V DC Power Supply 

(Sorensen) 


16.2.10.2 Power Down - - - - - - 

16.3 Weapons Release System 

TR: 1Q-9(M)A-2DB-1: 94GS-00-1 

* 16.3.1 Armament Systems Overview B - - - - - 

* 16.3.2 Armament System Safety 

Hazards 

B - - - - - 


TR: 1Q-9(M)A-2DB-1: 94JG-00-1; 

94JG-30-1 

* 16.4.1 Description B - - - - - 



16.4.4 Outboard Pylon 

16.4.4.1 Remove - - - - - - 

16.4.4.2 Disassemble - - - - - - 

16.4.4.3 Inspect - - - - - - 

16.4.4.4 Repair - - - - - - 

16.4.4.5 Assemble - - - - - - 

16.4.4.6 Install - - - - - - 

16.4.5 Mid-Station Pylon 

* 16.4.5.1 Remove 1b - - - - - 

16.4.5.2 Disassemble - - - - - - 

16.4.5.3 Inspect - - - - - - 

16.4.5.4 Repair - - - - - - 

16.4.5.5 Assemble - - - - - - 

* 16.4.5.6 Install 1b - - - - - 

16.4.6 Inboard Pylon 

* 16.4.6.1 Remove 1b - - - - - 

16.4.6.2 Disassemble - - - - - - 

16.4.6.3 Inspect - - - - - - 

16.4.6.4 Repair - - - - - - 

16.4.6.5 Assemble - - - - - - 

* 16.4.6.6 Install 1b - - - - - 

16.4.7 Centerline Pylon 

16.4.7.1 Remove - - - - - - 

16.4.7.2 Disassemble - - - - - - 

16.4.7.3 Inspect - - - - - - 

16.4.7.4 Repair - - - - - - 

16.4.7.5 Assemble - - - - - - 

16.4.7.6 Install - - - - - - 

16.4.8 BRU-15 Bomb Rack Unit 

* 16.4.8.1 Remove 2b - - - - - 

* 16.4.8.2 Disassemble - - - - - 

* 16.4.8.3 Inspect B 2b - - - - - 

16.4.8.4 Repair - - - - - - 

155 1 January 2012

MQ-9 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

* 16.4.8.5 Assemble B 2b - - - - - 

* 16.4.8.6 Install 2b - - - - - 

* 16.4.8.7 Perform Bench Check 2b - - - - - 


16.4.9 BRU-71 Bomb Rack Unit 

16.4.9.1 Remove - - - - - - 

16.4.9.2 Disassemble - - - - - - 

16.4.9.3 Inspect - - - - - - 

16.4.9.4 Repair - - - - - - 

16.4.9.5 Assemble - - - - - - 

16.4.9.6 Install - - - - - - 

16.4.9.7 Perform Bench Check - - - - - - 


16.4.10 MA-4B Bomb Rack 

* 16.4.10.1 Remove 2b - - - - - 

* 16.4.10.2 Disassemble 2b - - - - - 

* 16.4.10.3 Inspect 2b - - - - - 

16.4.10.4 Repair - - - - - 

* 16.4.10.5 Assemble 2b - - - - - 

* 16.4.10.6 Install 2b - - - - - 

* 16.4.10.7 Perform Bench Check 2b - - - - - 


16.4.11 M299 Dual Rail Launcher 

* 16.4.11.1 Remove 2b - - - - - 

16.4.11.2 Disassemble - - - - - - 

16.4.11.3 Inspect - - - - - - 

16.4.11.4 Repair - - - - - - 

16.4.11.5 Assemble - - - - - - 

* 16.4.11.6 Install 2b - - - - - 



Inspection 

TR: 1Q-9(M)A-2DB-1: 94JG-30-1 

16.5.1 BRU-15 Bomb Rack Unit 3b - - - - - 

16.5.2 BRU-71 Bomb Rack Unit - - - - - - 

16.5.3 MA-4B Bomb Rack - - - - - - 

16.5.4 M299 Dual Rail Launcher - - - - - - 


Components 

TR: 1Q-9(M)A-2DB-1: 94JG-10-1 

16.6.1 Description A - - - - - 

16.6.2 Keystone Module Assembly 

16.5.2.1 Remove - - - - - - 

16.5.2.2 Install - - - - - - 


16.6.3 Mission Control Module 

16.5.3.1 Remove - - - - - - 

16.5.3.2 Install 

16.6.4 Relay Assembly Jettison Arm 

16.5.4.1 Remove - - - - - - 


16.6.5 SSIU Assembly 

156 1 January 2012

MQ-9 


Tasks 





5 


Level 

Trainee 

Initials 

Trainer 

Initials 

Certifier 

Initials 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

(1) 

Crse 

(2) 

CDC 

16.5.5.1 Remove - - - - - - 


16.6.6 AGM-114 Controller Module 

16.5.6.1 Remove - - - - - - 


16.6.7 Power Inverter 

16.5.7.1 Remove - - - - - - 


16.6.8 Inrush Current Limiter 

16.5.8.1 Remove - - - - - - 


16.6.9 Inverter Tray 

16.5.9.1 Remove - - - - - - 



16.7.1 Description - - - - - - 


* 16.7.2.1 A/N-AWM-101A Tester A - - - - - 

16.7.2.2 AN/AWM-103 - - - - - - 


* 16.7.3.1 A/N-AWM-101A Tester 1a - - - - - 

16.7.3.2 AN/AWM-103 - - - - - - 


16.7.4.1 A/N-AWM-101A Tester - - - - - - 

16.7.4.2 AN/AWM-103 - - - - - - 

16.7.5 Repair 

16.7.4.1 A/N-AWM-101A Tester - - - - - - 

16.7.4.2 AN/AWM-103 - - - - - - 


TR: 1Q-9(M)A-2DB-1: 94FI-00-1 



Orders 

1a - - - - - 


Diagrams 

1a - - - - - 



TR: 1Q-9(M)A-33-2-1 



* 16.9.2.1 Load F 1b - - - - - 

* 16.9.2.2 Unload F 1b - - - - - 

157 1 January 2012

AFSC 2W1X1 AIRCRAFT ARMAMENT SYSTEMS ... - Air Force Link

Create successful ePaper yourself

Delete template?

Save as template?