DEDICATED TO PROFESSOR HC BROWN ON HIS ... - Sigma-Aldrich

Equipment for Air-Sensitive Chemistry
KDS SYRINGE PUMPS
Advanced microprocessor-controlled syringe pumps designed especially for low, pulse-free flow
rates. Easy setup:
1. Select syringe size 2. Enter volume to be
dispensed
Single-syringe pumps
Series 100 infusion pumps. Combine precision and simplicity
with ease of use and exceptional durability. The
230V pumps are CE compliant. 9 x 6 x 5in. 4Flb.
Features:
• Holds any size syringe from 10mL to 60mL
• Automatic volume control and shutoff
• Last settings stored in memory
• Continuous dispense volume display
• Simple menu-driven setup:
syringe diameter (selected from displayed table)
dispense volume
dispense flow rate
Volts Cat. No.
115 Z40,135-8
230 Z40,136-6
Note: For extra security when using
large bore transfer needles, fasten septum
to bottle or flask opening with a
wrap-it tie. See the Septa Section of
the Aldrich Handbook for a listing of
these products.
CHEM-FLEX transfer lines
Especially suited for transfer of products packed in Aldrich Sure/Seal bottles.These ready-to-use
transfer lines incorporate CHEM-FLEX 106 tubing which has a chemically-inert, thin-wall PTFE
inner tube sheathed in clear PVC for extra strong, flexible lines that are resistant to crushing or
kinking. Two 12 gauge SS needles (6 and 18in.) are connected to the CHEM-FLEX 106 tubing
with nylon clamps. Liquids contact only PTFE and SS during transfers.
Tubing L (in.) Cat. No.
30 Z23,102-9
60 Z28,175-1
120 Z28,177-8
3. Enter flow rate, then press
start button
Dual-syringe pumps
Series 200 infusion pumps. All the features of Series
100 pumps plus:
• Holds two syringes, sizes 10mL to 140mL each
• Settings can be reviewed or changed
during operation
• Optical encoder stall detection
• Choice of unit selection
• RS-232C interface for computerizing up to
100 pumps
• TTL interface for foot switch, timer, relay
control; outputs for run indicator, valve control
• 11 x 9 x 5Fin. 9lb.
Volts Cat. No.
115 Z40,137-4
230 Z40,138-2