9362588a, Operating Manual DVB Caravan Receiver ... - Kathrein

Sound Settings
Sound Settings
Volume setting
Stereo and two-channel sound reproduction
30
Set the required volume level by pressing the buttons on the remote
control of the receiver. A bar indicator is displayed on the screen
to show the set volume.
The channel identifier, which is displayed by pressing the button,
shows the set sound reproduction. (Depending on the direction of the
sound wave symbols –below the time of day –the sound setting may
be mono left, mono right or stereo. The number indicates the number
of transmitted sound channels).
Press the button to call up the audio menu for sound and language
selection. You can now make the required settings, e.g. language
selection, provided the corresponding data is contained in the
reception signal (sound track), Dolby Digital (5.1 CH). Select the menu
points by pressing the buttons and select the required set-
ting with the buttons. Press the button once again to exit
the menu.
If captions are transmitted, you can select the bar caption language
with the buttons and confirm by pressing .
The following sound settings are possible:
Sound track 1 of 2 2 of 2
Audio mode Stereo Stereo
Digital output MPEG stereo Dolby Digital / AC3