9362588a, Operating Manual DVB Caravan Receiver ... - Kathrein

Adding and Removing Satellites
Entering satellite names
Removing satellites
After pressing the or button, you are asked if you want to add the
satellites.
Confirm it with .
The following message appears
You can now make the respective entries to your receiving system in
the corresponding positions using the , and or buttons
and exit the menu by pressing three times. At the same time the
new station data is stored.
You can change the satellite name in the LNB configuration menu using
the number buttons. Refer to section "Operating instructions" for
information about the exact procedure.
To remove a satellite, select the "LNB configuration" menu, move the
cursor bar with or and confirm by pressing the or button.
You will now be asked whether you wish to remove the satellite.
You can either confirm your selection with or cancel with .
43