You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MP</strong>-<strong>201</strong> User’s <strong>Manual</strong><br />
Edit Mode<br />
Edit Mode allows you to edit the parameters of a Preset. Edit Mode can be entered<br />
from Single Channel Mode or Quad Channel Mode simply by pressing EDIT or by<br />
pressing FS2 & FS4 simultaneously.<br />
In Edit Mode, the VALUE Encoder or footswitches 1 & 2 (FS1 and FS2) are used to<br />
scroll through the edit menus. In any menu, pressing the Encoder pushswitch or FS4<br />
moves the cursor to the bottom line of the LCD, where you can change the edit value<br />
using the VALUE Encoder. Pressing the Encoder pushswitch or FS4 again moves the<br />
cursor back to the top line of the LCD.<br />
Page 20<br />
NOTE: When the cursor appears in the value field, the footpedal<br />
is used to set Footpedal Parameter values, such as the Heel,<br />
Toe and Initial values. The VALUE encoder can be used for ‘fine’<br />
adjustments to these values.<br />
Footswitch 3 (FS3) is used to select the Channel or Preset MIDI routing for editing<br />
(CH1, CH2, CH3, CH4, or ALL). You can change the current Channel (or MIDI ALL)<br />
at any time while in Edit Mode.<br />
To exit from Edit Mode at any time, press the EDIT button again. Note that any<br />
changes made to Preset parameters are maintained until the Preset number is<br />
changed, but will be lost if you do not save them (see ‘Storing Presets’, page 32).<br />
NOTE: When you edit the ‘Heel’, ‘Toe’, an ‘Initial’ values in Expression<br />
Mode and LFO Mode, and the ‘Rate’, ‘Amount’ and ‘Offset’<br />
values in LFO Mode, the footpedal has no effect on any other<br />
Channel, or any other parameter. The CV and MIDI outputs reflect<br />
the voltage/MIDI CC values of the footpedal position, allowing you to<br />
‘hear’ what the actual values are.