Operating Instructions for Digital Mass Flow Meter and Controller Model: DMS
Operating Instructions for Digital Mass Flow Meter and Controller Model: DMS
Operating Instructions for Digital Mass Flow Meter and Controller Model: DMS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Kobold Messring GmbH Chapter 6 Technical Support<br />
CHAPTER 6: TECHNICAL SUPPORT & SERVICE<br />
Technical Support<br />
If you encounter any problem with your instrument, review the configuration<br />
in<strong>for</strong>mation <strong>for</strong> each step of the installation, operation, <strong>and</strong> set up procedures<br />
as explained in this manual. Verify that your settings <strong>and</strong> adjustments are<br />
consistent with factory recommendations.<br />
If the problem persists, Kobold is eager to help you. You may contact your next<br />
next Kobold Messring office <strong>for</strong> assistance. (Please see <strong>for</strong> your next Kobold<br />
Messring office www.kobold.com)<br />
IMPORTANT: When contacting Kobold Messring, make sure<br />
you have included the following in<strong>for</strong>mation:<br />
_ The flow range, serial number, Kobold order number <strong>and</strong> model number<br />
(all marked on the instrument data label).<br />
_ The problem you are encountering <strong>and</strong> any corrective action taken.<br />
_ Application in<strong>for</strong>mation (gas, pressure, temperature, pipe <strong>and</strong> fitting configuration).<br />
<strong>DMS</strong> 6-1
Change language