Serial Interface System RS 422 SYNMET / NAV (SCH 664) - Windaus
Serial Interface System RS 422 SYNMET / NAV (SCH 664) - Windaus
Serial Interface System RS 422 SYNMET / NAV (SCH 664) - Windaus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10<br />
Operating Instructions<br />
<strong>Serial</strong> <strong>Interface</strong> <strong>System</strong> (<strong>SCH</strong> <strong>664</strong>)<br />
- related component or name of higher assembly<br />
- type of vessel and country of origin<br />
- reference number of LAMBRECHT wiring diagram designated with the bold letters SKF.... or SWF.... and a 3 or 4-digits<br />
running number.<br />
A detailed inquiry containing these information will be appreciated by us for the safe identification of the required item(s)<br />
and to prevent wrong deliveries. Above mentioned data can be obtained from the designation label and from the spares<br />
list of this system component.<br />
3.7 <strong>System</strong> configuration<br />
As mentioned in this manual all functional configuration parameters e.g. connected sensors and interface design<br />
specification data are programmed project-specific according to the stipulated demands in our works before delivery. All<br />
relevant operational data are stored in non-volatile memory circuits (EPROMS, EEPROMS and battery buffered RAM's)<br />
in order to keep the memory content also on stock, during shipment and in a switched-off mode of the system. Therefore<br />
for the user any access to these parameters is not necessary.<br />
Deliveries of spares will be carried out in that way that all configuration settings will be carried out in our works by skilled<br />
staff.<br />
The configuration procedure of the <strong>SYNMET</strong>-<strong>NAV</strong> CPU board in our works has been carried out by means of a<br />
circumference LAMBRECHT software-tool called <strong>SYNMET</strong>-COMMANDER during production and in the test field of the<br />
factory.<br />
4.0 Setting out of Operation<br />
4.1 Storage<br />
The interface box <strong>SCH</strong> 660 should be stored in a clean and dust-free room with temperatures between -40 and 60 øC<br />
(not condensing) in the original cardboard box or a similar packing.<br />
4.2 Dispatching<br />
For shipment we recommend to use the original cardboard box or a similar packing with applicable damping material.<br />
There is no need to lock any parts during transport.<br />
5.0 Remarks<br />
This manual describes the standard design as well as possible options. The respective performance will be stated in the<br />
specification and/or the documents of the contract.<br />
Our products are subject to continuous developments. Technical alterations for the technical progress are reserved.<br />
Quality <strong>System</strong> certified by DQS according to<br />
DIN EN ISO 9001 Reg. No. 3748 Specifications subject to change without notice 09.01<br />
Wilh. Lambrecht GmbH<br />
Friedländer Weg 65-67<br />
37085 Göttingen<br />
Germany<br />
Tel +49-(0)551-4958-0<br />
Fax +49-(0)551-4958-312<br />
E-Mail info@lambrecht.net<br />
Internet www.lambrecht.net<br />
In more than 100 countries