Geotechnical and Materials Engineering Standards for Bridge ...

2.12... OTHER. TESTS
M - Mechanical Analys f s
Q.R. S . - Triaxial Compressfon
C - Consolidation
DS - Direct Shear
2.13 ... REPRODUCTION AND STORAGE REQUIREMENTS
- 8.5 * 11" copies of Summary Logs to be included in Geoteclhnical
Report
- See Summary Log Drawing Sheet instructions for preparing
drawing for Bridge Contract (See Section 3)
2.14... CEOTECNNICAL ENGINEERING AUTOCAD SUMMARY LOG
(8.5" x II" - 4 sheets, 0 m - 72 m)
PROTOTYTE FILE NAME: - GHSUM100
MAD FILENAMl?: FILENAME - GHS'IJM100 (item 1 on main Autocad menu)
VIEWS: 0, 18, 36, 54 full sheets
5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70 partial
sheets
MYERS : GOFORM
GOTEXT
18 m to 36 m (Sheet 2, View 18)
36 m to 54 rn (Sheet 3, View 36)
54 m to 72 m (Sheet 4, View 54)
LISP: IN - - LISP routine which inserts the following blocks
simply by multiplying the depth by 10.
e.g. 30 inserts block at 3.0 m
e.g. 76 inserts block at 7.6 m
BLOCKS : - Type in appropriate information with each block on
the proper text layer,
T - TITLE - insert block T at depth of 0
- array title far sheets 2, 3 and 4 when hole is
greater then 18.0 m (distance factor of -180)
- change arrayed title to appropriate text layer
(GWTEXT eg. G18TEXT)
- attedit sheet # of #