Geotechnical and Materials Engineering Standards for Bridge ...

3.4... . REPRODUCTION AND STORAGE REQUIREMENTS
- 1 - Fullsize Original A1 Size (vellum) for Bridge contract
- 1 - Fullsize copy for Geotechnical and MaterTals
Engineering Drawing Starage
- 2 - 5.25 Floppy Disks (preferably Dysan 1.2M)
far Geotechnical and Materials Engineering Storage
3.5 .... SUMMARY LOG DRAWING (A1 SIZE) AUTOCAD INFOXMATION
(for inclusion with Bridge Contract Drawings)
PROTOTYPE FILE NAME: GHBASElB
LOAD FILENAME: FILENAME - GHBASElB (item 1 On main AutoCAD
menu)
VIEWS : T - zooms title block
Plot - A1 size sheet
TAYERS: GHBASEl - Base Sheet
GHTITLEl - Title Block
GCONSULT - Box above Title Block for Consultants Name,
Address and hgo
GHT 1 TREV - Revision Box (frozen until required, move if
necessary)
GWTSTINS - Summary Logs insertion points (freeze before
final plot)
GTESTHOLE - Summary logs inserted on this layer
GLEGEND 1 - Materials Classification Legend (GLECENDl)
thaw before final plot
INSERT: WBLOCKED 8.5 x 11" Summary Logs insert onto Layer
GTESTHOLE using upper left comer of 8.5 x 11" sheet
as insertion point.
BLOCKS :
GHTITLEl - TITLE TEXT
- insert on layer GHTITLEl @ 0,0 and type
in appropriate fnformation.
GLEGENDI - MATERIALS CLASSIFICATION LEGEND
- thaw layer GLEGENDl before final plot
GHTITREV - REVISION TEXT
- insert on layer CHTLTREV @ 0,Q and type
in appropriate information.
PLOT :
- - Freeze layer GTSTINS before final plot
- use view PLOT
-1-1
- Pen sizes
red -0.25
yellow - 0.35
green - 0.50
cyan - 0.70