Manual en castellano para Power Vision 1.7 - Circutor

2.- INTRODUCTION TO POWER VISION
Power Vision is a program specifically designed to operate with network
analysers and the following measuring devices: AR5, QNA, CVM-COM, CVM-BDM-1M
and the CIRCUTOR CPL. Therefore, it is the ideal complement and almost
indispensable for these. This software allows data that is captured by said devices, to
be read and processed, providing a wealth of details thanks to the powerful tool groups
offered by the software. Power Vision offers three large groups of functions.
♦ First, communication functions with the portable devices AR5 and CPL allow the
user to extract the files stored on these devices and save them comfortably to the
hard drive on the PC.
♦ Second, functions are available for communicating with and configuring the QNA,
CVM-COM, and CVM-BDM-1M devices, which are connected through RS-232 and
GSM. Manual and automatic file downloads can be performed in this section.
♦ Third, functions are available to analyse extracted files, allowing the user to work
with these files intuitively and in depth. Thus, it is possible to perform detailed
analyses the network from which the data was extracted in much detail.
Furthermore, Power Vision provides the user with an ample set of functions that
permits configuring the functionality of the application. Without a doubt, this will make
using the application more pleasant and enjoyable.
In short, Power Vision permits the user to get all of the benefit from these
network analysers and measuring devices, simplifying the study of network data and
offering all the power necessary at the same time.
About Power Vision Screen
Once the About Power Vision screen appears, wait a few moments until the
application finishes loading. Said screen will disappear shortly and the application will
be ready to begin working.
12