Manual en castellano para Power Vision 1.7 - Circutor

3.- COMMUNICATIONS
In this section all the information on the steps that should be taken to
communicate with the AR5 system analyser, as well as with a QNA, CVM-COM, CVM-
BDM-1M, or CPL. You will learn how to read a file stored on any of these devices and
save it to the hard drive, as well as modify it and/or query its configuration.
3.1.- Portable Device Connection
3.1.1.- AR5 Network Analyser Connection
First, connect the AR5 network analyser to a free COM port (serial port) on the
computer.
Once the AR5 is connected to the serial port, wait for the program to
automatically detect the connection.
Two access methods can be used to make the automatic detection:
♦ Left click the mouse over the icon on the toolbar (note that when the cursor is
hovered over the icon, a “Portable Devices” tag appears).
Toolbar
♦ Click the “Files” option on the menu bar, and then click “Portable Devices”.
Expand the “Files” menu by hovering the cursor over said option and left clicking.
The menu can also be expanded by pressing the key combination ALT + ‘F’ (note
that the letter ‘F’ is underlined).
Menu bar
14