Manual en castellano para Power Vision 1.7 - Circutor

On this screen, the different GPRS alarm parameters can be configured: access
points configuration and ftp, schedule synchronisation via GPRS, files to download,
start date and time, and cadence. In the lower part of the screen, buttons appear with
the following different options: send configuration to the device; receive configuration
from the device; and export and import configuration for later use in other
configurations.
If QNA-GSM (412 or 413 because in older QNA models the following process is
not recommended) is available, a GSM modem PIN change can be made. To do this,
click the “Change PIN” button, which is located in the lower left part of the screen.
Change PIN Button
When the button has been clicked, a screen giving the option to change or
deactivate the current PIN should appear. There are many options depending on the
connection type served. With a modem connection, the PIN change will require the old
PIN, the new PIN, and the re-entry of the new PIN. There is also a checkbox that can
be used to activate the PIN for use.
GSM Modem PIN Modification via Modem
With an RS-232 connection (always a QNA GSM), a PIN change (as in the
previous example by modem) or a SIM change (by selecting the checkbox) will require
the new PIN, the repeated entry of the new PIN, and the PUK.
42