RealFlight G5 Manual (21MB) - Great Planes Software Support

To change the Trees setting, click the value located to the right of the
Trees. Select No, if you do not wish to display the trees in your
simulation. If you wish to view the trees during flight, select Yes.
Please note: This setting will not affect the presence of trees that are
part of the high-resolution digital image in the PhotoField airports.
Wind Field Indicators-
This parameter determines whether or not RealFlight displays the
wind field indicators that are present at select airports.
Post-processing: Bloom-
The Bloom effect will cause lighter colors or lights to bleed into
neighboring parts, enhancing their perceived brightness.
Please note: Enabling the Post-Processing: Bloom effect may
adversely impact performance. If you notice a poor frame rate while
running RealFlight, try turning this option to No.
Post-processing: Night Flying Glow-
This option affects whether lights for night flying glow, causing the
objects to appear brighter.
Please note: Enabling the Post-Processing: Night Flying Glow effect
may adversely impact performance. If you notice a poor frame rate
while running RealFlight, try turning this option to No.
Post-processing: Depth of Field-
This option affects the strength of the depth-of-field effect. A
stronger effect will cause out of focus objects to appear more blurry –
great for screen shots. Some pilots will prefer to turn this setting lower
for actual flight.
Foliage Density (%)-
This setting determines the density and drawing time of the trees and
the grass. Lowering the percentage will ensure that the scenery is
drawn faster. Again, if you are experiencing low frame rates, lowering
this value will speed up the simulation.
To adjust the percentage, click on the value located to the right of the
Foliage Density (%) name. Enter the desired input directly from your
keyboard, or use the mouse wheel.
108