RealFlight G5 Manual (21MB) - Great Planes Software Support

Throttle Hold
R/C Term
Throw
R/C Term
Tip Stall
R/C Term
Torque Roll
R/C Term
Touch and Go
R/C Term
Trailing Edge
R/C Term
Trainer
R/C Term
Training Aids
RealFlight Term
TruFlo Wind Dynamics
RealFlight Term
Turbulence System
RealFlight Term
This is used to keep the throttle at a set position, yet
allows input to the collective of the helicopter.
Generally this function is used to practice
autorotation.
Commonly used to describe the degree of
deflection of a control surface.
This is when the airplane reaches its stall speed and
one wing drops.
The Torque Roll occurs when the nose of the
airplane is pointed vertically and the airplane hovers
in place. The aircraft will rotate left around its roll
axis.
Landing and taking off without a pause, often
confused with a good bounce.
The rearmost edge of the wing or stabilizer.
A model designed to be inherently stable and fly at
low speeds, to give first-time modelers time to think
and react as they learn to fly.
RealFlight G5.5 offers a variety of features to learn
new maneuvers. These consist of training aids that
take you through step-by-step basic flight lessons,
such as takeoffs and landings for airplanes, and
Hovering practice for helicopters. Prerecorded
lessons are also available from professional pilots.
RealFlight G5.5’s TruFlo Wind Dynamics is the
most accurate wind model ever released in an R/C
simulator. It combines five different wind models
to recreate the ever-changing wind fields found at a
real flying site.
This is the ability of RealFlight to induce turbulent,
rough air, as would be experienced at the flying site.
337