Display the screen. - TA Triumph-Adler GmbH

Printing > Printing Data Saved on the Printer
Proof and Hold
Proof and Hold stores the print data which is printed by using the printer driver as a Proof and Hold Print job.
Refer to the Printing System Driver User Guide on how to print a job as Proof and Hold Print job using the printer driver.
NOTE
RAM disk mode must be enabled. RAM disk mode can be used when optional memory has been installed.
For details, refer to RAM Disk Setting on page 9-23.
Setting the Number of Stored Jobs
To maintain free space on the RAM disk, you can set the maximum number of stored jobs.
1
2
Display the screen.
1
Enter the maximum number of stored jobs.
System Menu/Counter.
Job Box - Quick Copy Job Retention
(0 - 50)
1
Cancel
job(s)
2
You can enter any number between 0 and 50.
OK
NOTE
If you enter a value of 0 (zero), you cannot use the Proof and Hold function.
5-8
GB0054_02
10:10
System Menu/Counter.
System Menu
Send
GB0311_00
Document Box
FAX
System Menu/Counter.
Document Box
Address Book/One Touch
Sub Address Box
GB0290_00
Job Box
Polling Box
GB0310_00
2
3
System Menu/Counter.
Document Box - Job Box
Quick Copy Job Retention
Deletion of Job Retention
< Back
4
10:10
3/5
< Back
10:10
1/1
32job(s)
Off
10:10
1/1