Display the screen. - TA Triumph-Adler GmbH

Preparation before Use > Connecting Cables
Connecting USB Cable
The equipment can be connected with a USB cable and used as a printer or scanner in an environment where there is
no network.
1
2
Power Off.
Connect the machine.
1 Connect the USB cable to the appropriate interface located on the left side of the body.
2 Connect the other end of the cable to the PC.
Connecting the Power Cable
Check that the indicators are off.
Connect one end of the supplied power cable to the machine and the other end to a power
outlet.
IMPORTANT
Only use the power cable that comes with the machine.
2-11