Pages • Multi-Mat® Concept • Lamina Multi-Mat® full ... - Tikontools
Pages • Multi-Mat® Concept • Lamina Multi-Mat® full ... - Tikontools
Pages • Multi-Mat® Concept • Lamina Multi-Mat® full ... - Tikontools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TPUN 160308<br />
Material Group<br />
Low Carbon Steel 1<br />
Nickel Based Alloys<br />
Titanium Based<br />
Alloys<br />
Milling bodies<br />
Group Brinell d.o.c [mm] feed [mm/tooth] Vc [m/min]<br />
Material Examples*<br />
No hardness min max min max min max<br />
Ck 15<br />
9SMnPb28<br />
42 CrMo 4<br />
Alloy Steel 2 100 Cr 6<br />
32 NiCrMo 14.5<br />
X38 CrMoV 5<br />
High Alloy Steel 3 X210 CrW 12<br />
4<br />
X90 CrMoV 8<br />
150 12.0<br />
0.32<br />
300<br />
180 0.5 12.0 0.12 0.32 190 260<br />
210 12.0<br />
0.32<br />
220<br />
180 7.0<br />
0.18<br />
0.5<br />
0.12<br />
230<br />
7.0<br />
0.18<br />
130<br />
200<br />
180<br />
280<br />
320<br />
220<br />
0.5<br />
7.0<br />
7.0<br />
0.12<br />
0.18<br />
0.18<br />
100<br />
160<br />
140<br />
280<br />
320<br />
350<br />
303 / 304 210<br />
304 L to 250<br />
Austenitic<br />
230<br />
5 316 / 316 L<br />
Stainless Steel to 270<br />
Ferritic Stainless<br />
Steel<br />
6<br />
316 Ti<br />
630 (F16PH)<br />
--------<br />
7 430 / 439 / 444 Annealed<br />
Martensitic<br />
Annealed<br />
8 410 / 420<br />
Stainless Steel Treated<br />
TPUN inserts are not recommended for stainless steels.<br />
EN - GJL 200<br />
240<br />
140<br />
Grey Cast Iron 9 EN - GJL 250<br />
0.5 12.0 0.12 0.22 150 220<br />
to 230<br />
EN - GJL 300 190<br />
EN - GJS 400 210<br />
200<br />
Nodular Cast Iron 10 EN - GJS 600 260 0.5 12.0 0.12 0.18 100 160<br />
2 4<br />
EN - GJS 800 310 130<br />
Inconel 625<br />
11 Inconel 718 --------<br />
12<br />
Hastelloy C<br />
TiAl 6 V4<br />
T40<br />
--------<br />
TPUN inserts are not recommended for high<br />
resistance steels.<br />
TPUN inserts are not recommended for exotic materials.<br />
Alu-Milling<br />
LT-05 Milling<br />
<strong>Lamina</strong>'s new and unique line of Milling inserts<br />
for Aluminum and soft material machining.<br />
Based on revolutionary geometry and our<br />
unique coated grade, LT-05.<br />
<strong>Pages</strong> 216 to 219<br />
2 5<br />
Alu-Line
Change language