Download - RCBS

50 bmg 50 bmg
A B
C
F
A AmmoMaster B High Capacity Case Trimmer Kit
® .50 BMG Pack C 1-1/2˝—12 Bullet Puller
The AmmoMaster ® .50 BMG Pack makes reloading for the .50
Browning Machine Gun cartridge a simple task. Manufactured
to accept RCBS ® 1-1⁄2” .50 BMG dies, along with the massive 1”
solid steel ram, provides more than enough strength to handle
the .50 and will provide a lifetime of service. This kit includes the
press, Full-Length Sizer, Seater Die, Shell Holder, Ram Priming
Unit and Trim Die in one convenient box. The only extras required
are cartridge components and the rifle to fire them!
88700 AmmoMaster .50 BMG Pack $787.95
88715 Standard Shell Holder Adaptor $28.95
Trim all of your big bore cases in no time with the new RCBS ®
High Capacity Case Trimmer. Designed to handle the most
beefy cases such as the .50 BMG and .416 Barrett—plus many
other favorites—RCBS answers the call of the big bore shooter.
Includes .408, .416 and .50R caliber pilots.
90352 High Capacity Case Trimmer $157.95
90353 Collet #1 $21.95
90354 Collet #2 $21.95
Collet Fit Chart
.50 BMG/.416 Barrett HC #1 HC #2
.40-60 Winchester .50-70 Gov’t .338 Lapua
.408 CheyTac .50-90-21/2˝ Sharps Straight .40-65 Shiloh Sharps
.416 Barrett .56-50 Spencer .45-70 Gov’t
.45-60 Winchester .470 NE 31/4˝ .45-90-2.4˝ Sharps Straight
450x400x3˝ (400 Jeffery) .500 Jeffery .45-100-2.6˝ Sharps Straight
.50-95 Winchester .500 NE 3˝ .45-110-27/8˝ Sharps Straight
.505 Gibbs .45-120-31/4˝ Sharps Straight
.50 BMG .404 Jeffery
.450 Rigby Rimless
D E
The 1-1/2”—12 Bullet Puller is designed for use on the
AmmoMaster ® —2 or AmmoMaster .50 BMG pack press. Using
the .416 or .50 BMG bullet puller collets (sold separately) allows
the quick removal of bullets from loaded ammunition so that you
can salvage your components.
9446 1-1/2˝—12 Bullet Puller $164.95
9447 .416 Barrett Collet $65.95
9448 .50 BMG Collet $65.95
D .50 BMG Carbide Primer Pocket Uniformer
Designed to be used with the RCBS ® Accessory Handle or on
the RCBS Trim Mate Case Prep Center, the .50 BMG Carbide
Primer Pocket Uniformer utilizes a carbide cutter to square the
bottom of the primer pocket and uniform the primer pocket
depth. This allows the handloader to easily seat primers to a
consistent depth for reliable ignition.
9561 .50 BMG Carbide Primer Pocket Uniformer $57.95
E .50 BMG Military Crimp Remover
Designed to be used with the RCBS ® Accessory Handle or on the
RCBS Trim Mate Case Prep Center, the .50 BMG Military Crimp
Remover cuts away the primer pocket crimp found on military
.50 BMG brass, allowing the handloader to easily reprime their
cases.
9562 .50 BMG Military Crimp Remover $33.95
rcbs.com rcbs.com
n 14 l n 15 l
F .50 BMG Priming System
The RCBS ® .50 BMG Priming system provides a dedicated bench
mounted system that allows handloaders to easily reprime their
cases. The primer tube holds (20) .50 BMG primers and features
a Safety Shield Tube. Primer pick-up tube, flat and oval primer
seat plugs included.
9560 .50 BMG Priming System $147.95
.50R Pilot/50-Caliber Cutter (not pictured)
Pilots and cutter for use on Rotary or Trim Pro case trimmers.
These accessories are a must if you are trimming cases like the
.500 S&W or .50-90 Government.
09400 .50R Pilot $5.95
09364 50-caliber Trimmer Cutter $19.95