Download - RCBS

PoWder handling PoWder handling
The ChargeMaster Dispenser can be added to the ChargeMaster
1500 Scale to form an unmatched combination of speed and
accuracy. When the ChargeMaster Dispenser is coupled with the
ChargeMaster 1500 Scale, it now has all of the same features
as the ChargeMaster Combo. The individual purchasing of
the units is to accommodate individual budgets. The Charge-
Master Dispenser requires the ChargeMaster 1500 Scale (sold
separately) to operate. One year limited warranty.
NOTE: Do NOT use with black powder!
98922 ChargeMaster Dispenser only $273.95
A B C D E F
G
A ChargeMaster Dispenser B ChargeMaster Combo C Powder Trickler System Combo
The ChargeMaster Combo features the ChargeMaster 1500
Scale and ChargeMaster Dispenser, preassembled to form an
unmatched combination of speed and accuracy. There is no
longer a need for timely calibration to the type of powder being
used. Simply fill the 1 lb+ capacity powder hopper with smokeless
powder, enter the desired charge and press the dispense
button. Average dispensing time is under 30 seconds for a 60
grain extruded powder charge. Dispensing can be done in grains
or grams mode. Accurately weighs and dispenses all extruded
(stick), ball (spherical) and flake smokeless powder from 2.0 to
300 grains to +/- 0.1 grain. You can store up to 30 of your favorite
loads in memory for fast easy recall. The front to back layout
allows easy access to the scale pan by right or left handed users.
The clear cover eliminates fluctuations in weighing caused by
air currents without obscuring your view of the charge being
dispensed. The powder drain feature allows for convenient and
easy emptying of the powder hopper. Power to the Dispenser
is provided by the connection to the ChargeMaster 1500 scale
so there is only one power cord to manage. The ChargeMaster
1500 Scale and dispenser can be purchased separately or as a
Combo set. One year limited warranty.
NOTE: Do NOT use with black powder!
98923 ChargeMaster Combo 120 VAC $484.95
98924 ChargeMaster Combo 240 VAC-EUR $484.95
The RCBS ® Powder Trickler System speeds up the process of
weighing your powder charges. The Powder Trickler System
attaches to any Uniflow or standard Quick Change powder
measure. Used in conjunction with the Advanced Powder Measure
Stand, the Powder Trickler System allows you to dispense and
trickle a powder charge directly onto a scale pan without having
to remove the scale pan for the initial filling. The unit can be
adjusted for right or left handed use and the dispensing chute
adjusts to allow you to drop the powder charge directly onto the
scale pan. With a few turns of the Trickler handle, your weighed
charge is complete. The Powder Trickler System is available as a
combo only.
Note: Not for use with Quick Change High Capacity, Little Dandy
or Black Powder Measure.
09091 Powder Trickler System Combo (PTS and APM) $58.95
D Advanced Powder Measure Stand
This stand will raise most Powder Measures 9-1/2” (with standard
7/8”–14 thread) leaving plenty of space for positioning a powder
scale pan or cases in a loading block under the drop tube. Bolts
easily to a reloading bench or table. Also serves as a stand for
holding a Piggyback II, Piggyback—3 or —4 when not in use.
Note: Not for use with Little Dandy Powder Measure.
09092 Advanced Powder Measure Stand $26.95
For Uniflow Powder Measure
The secret to faster reloading—go by the numbers. Add the UPM
Micrometer to your Uniflow E Micrometer Adjustment Screw
Powder Measure, and you can
record precise settings for your powder charges. Determine the
load number and dial it in—time after time. An easy installation
too; it simply replaces the Uniflow’s standard metering screw.
UPM Micrometer Adjustment Screws
98901 Large Cylinder - .685” diameter $53.95
98902 Small Cylinder - .500” diameter $53.95
rcbs.com rcbs.com
n 36 l n 37 l
F Black Powder Measure
Answering our customers’ calls for black powder products,
RCBS’ new Black Powder Measure is sure to be a hit. The one
pound capacity aluminum powder hopper and cap with a nonstatic
powder level indicator shows you how much powder is
left in the hopper. The brass non-sparking metering cylinder
and adjustment screw are also features that the black powder
enthusiast is looking for. With a 120 grain charge capacity, the
optional one-piece 24” aluminum drop tube is a must to get all of
the powder into the case.
The RCBS ® Black Powder Measure is the perfect unit for Black
Powder and Cowboy Action shooters.
98842 Black Powder Measure $165.95
98856 24” Aluminum Drop Tube $46.95
The Competition Powder Measure starts with the proven
Uniflow Powder Measure with its precision ground metering
drum and honed main casting. RCBS ® G Competition Powder Measure
then adds a powder
baffle and UPM Micrometer Adjustment screw. The Powder
Baffle controls the powder flow and the pressure of the powder
column on the metering unit. The UPM Micrometer Adjustment
screw allows precise adjustments to the metered charge as well
as allowing you to record the number for future reference and
reuse. Handle placement can be used on the right or left side
simply by changing the orientation of the metering drum. The
powder measure will accurately meter, by volume, all types of
smokeless powder—ball, flake or cylindrical (stick).
The Rifle unit meters volumetric powder charges from 10-110
grains. The Pistol/Small Rifle unit meters volumetric powder
charges from .5 to 40 grains. The Combo unit includes both the
Rifle and Pistol metering drums and complete UPM Micrometer
Adjustment screw assemblies.
Note: the Powder Measure should be used in conjunction with
an accurate powder scale for setting the original charge and for
checking charges occasionally during the run.
NOTE: Do NOT use with black powder!
98908 Competition Powder Measure – Pistol/Small Rifle $151.95
98909 Competition Powder Measure – Rifle $151.95
98910 Competition Powder Measure – Combo $227.95