Download - RCBS

Presses Presses
A Pro 2000 ® Auto Index Press & Upgrade Kit C Pro 2000 ® Progressive Press
Take your reloading to the next level with the RCBS ® Pro
2000 ® Auto Index Press. Five station automatic indexing for
maximum production in shorter sessions with a load rate of
approximately 600 rounds per hour. APS ® priming for the safest,
most convenient priming system on the market. Case activated
powder measure stops accidental spillage while the case
retention system provides quick access to cases. Quick change
die plate for fast caliber change over. Ability to change primer
sizes in less than a minute. Uniflow Powder Measure, APS
Strip Loading Tool, 32 empty APS Strips, bullet tray, empty
brass bin and loaded ammo bin included.
The Upgrade Kit allows you to convert your manual indexing
Pro 2000 to automatic indexing operation.
Accessory Base Plate not included.
See page 44-45 for list of Shell Plates.
88882 Auto Index Press $776.95
88883 Auto Index Upgrade Kit $140.95
B Bullet Feed Die—Pistol
Crank out ammo again in no time. The Pistol Bullet Feed Die allows
the progressive pistol loader to leave the feed die set up
on the removable die plate for quick caliber changeovers. The
popular RCBS ® Bullet Feeder shortens reloading sessions while
increasing load rates by approximately 50%. Includes Feed Die
body, one set of Bullet Fingers and a retaining clip.
82351 Bullet Feed Die—Pistol $31.95
A
B C
E
The Pro 2000 ® is an easy to use five station manual indexing
progressive press. Simply insert a cartridge case and bullet,
cycle the handle and index the shell plate. The five station
design allows for the use of a Powder Checker or Lock-Out die
or you can seat bullets and crimp cases in separate operations.
The APS ® priming system means that you never have to touch
your primers. Switching from large to small primer seating takes
seconds. The quick change die plate allows you to leave dies set
for quick caliber changeover and will accept any standard 7/8”–14
threaded dies. The Uniflow Powder Measure coupled with our
Case Activated linkage system means powder charges will be
dispensed accurately and only if a cartridge case is present! No
more accidental powder spillage mishaps! The large working
window and Universal Case Retention system allows easy removal
and insertion of cases at any station. Compound leverage makes
resizing rifle and pistol cases effortless. The rugged cast iron
frame will provide a lifetime of service and the RCBS warranty
guarantees it!
Accessory Base Plate not included.
See pages 44-45 for list of Shell Plates.
88875 Pro 2000 Progressive Press $693.95
88878 Pro 2000/Piggyback —3 & —4 Star Wheel $8.95
88877 Pro 2000/Piggyback —3 & —4 Die Plate $23.95
88876 Tube Priming Conversion Kit $141.95
88879 Low Primer Detector $43.95
86767 Dust Cover $19.95
09627 Pow’r Punch Decap Rod $8.95
If you own a RCBS ® Rock Chucker ® , Reloader Special —3,
or Reloader Special—5, (each sold separately), you know
they’re some of the finest single-stage presses ever built. The
Piggyback E Piggyback
—3 moves you from single-stage reloading to fivestation
manual indexing, progressive reloading in one step, and
moves your output from 50 rounds per hour to more than 400.
If you own the Rock Chucker Supreme, the Piggyback—4 is the
unit to convert the press to progressive operation.
Optional extra Star Wheel can remain permanently attached to
the Shell Plate for quicker caliber changeover. Piggyback —3 &
—4 includes Strip Loading Tool with 32 empty strips.
Accessory Base Plate and Press not included.
—3 & —4
87810 Piggyback —3 $523.95
87811 Piggyback —4 $523.95
88878 Pro2000/Piggyback —3, —4 Star Wheel $8.95
86767 Dust Cover $19.95
09627 Pow’r Punch Decap Rod $8.95
The Piggyback —3 & —4 is an accessory item for your existing
press. Requires Uniflow Powder Measure (not included).
See pages 44-45 for list of Shell Plates.
rcbs.com rcbs.com
n 6 l n 7 l
D
Keep your Pro 2000 ® , PiggyBack D Die Plate/Shell Plate Rack
—3 or PiggyBack—4 die
plates and five station shell plates organized. This handy rack
can be mounted horizontally on your bench or vertically on the
wall. The stamped steel rack securely holds your preset die plate
and a side slot keeps the five station shell plate in place. An
identification label is also included.
88881 Die Plate/Shell Plate Rack $22.95
G
F Pro 2000
Make caliber changes quickly and easily. Leave the reloading
dies set up. Eliminates the need to install and adjust dies for
each reloading session.
88877 Pro 2000/Piggyback —3 & —4 Die Plate $23.95
® /Piggyback —3 & —4 Die Plate
G AmmoMaster/Piggyback II Die Plate
Reduce the time and effort to remove, replace and adjust dies
when making caliber changes on your AmmoMaster ® Auto or
Piggyback II conversion unit. This replacement top plate allows
you to have additional calibers set up and ready. It is complete
with a five station top plate, clutch bearing with bushing, cam
wire clip with lock nut and setscrew.
88799 AmmoMaster/Piggyback II Die Plate $47.95
F