Original Web Bulletin Board System - Tony's Train Exchange
Original Web Bulletin Board System - Tony's Train Exchange
Original Web Bulletin Board System - Tony's Train Exchange
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
18<br />
system defaults in a DCS100 for example and you can status<br />
edit individual decoders.<br />
You should refer to the documentation for your particular<br />
components. All the Digitrax product docs are on the Digitrax<br />
website.<br />
Dale<br />
Reverse Loop<br />
Posted by Bill Stone on January 15, 2004, 09:12pm<br />
I am about to inastall a reverse loop [HO]. I have a Lenz 100 system<br />
and would appreciate suggestions on what to buy. I have a Lenz 90-<br />
100 <strong>System</strong>. Will either the Atlas or Lenz reverser work or are there<br />
advantages in either one other than cost?<br />
Thanks,<br />
Bill Stone<br />
Re: Reverse Loop<br />
Posted by DonV on January 16, 2004, 05:47pm<br />
But the On-Guard AR unit from Tony.<br />
It simply works.<br />
Re: Re: Reverse Loop<br />
Posted by DonV on January 16, 2004, 05:49pm<br />
Sorry, I can't type today.<br />
Buy the On-Guard unit.<br />
Dream Speakers<br />
Posted by DonV on January 14, 2004, 12:47pm<br />
Thanks for testing and publishing the Dream Speaker investigation.<br />
contact<br />
Posted by James E Zaitz, Sr on January 10, 2004, 06:17pm<br />
Tony:<br />
Please help me! A gentleman saw my AD, and sent me, a $1,000.00<br />
worth of H.O. trains. I have his N-gauge ready for shipment, yet he<br />
did NOT put an Address for me to ship his trains too. The phone<br />
number he gave me is NOT a working number! Name is: Dave<br />
Brown, Rockford, IL. Could you Post this to try and help me gethis<br />
correct mailing address to be able to ship his trains to him ASAP.<br />
Thank you VERY MUCH!<br />
Sincerely,<br />
James E. Zaitz, Sr<br />
Re: contact<br />
Posted by Railman on January 10, 2004, 10:35pm<br />
www.anywho.com lists 2 David Browns<br />
2217 N. Alpine Rd<br />
Rockford, IL 61107<br />
815-398-1140<br />
David L. Brown - Atty.<br />
401 W. State Street<br />
Rockford, IL 61101<br />
815-968-4474<br />
hope this helps<br />
Re: contact<br />
Posted by Jim Zaitz on January 20, 2004, 02:30pm<br />
Dave Has called Thanks<br />
crest compatability<br />
Posted by jg on January 08, 2004, 01:55pm<br />
A company called Crest makes a "switching" dc power supply.<br />
it is available from micromark.<br />
would this power supply be compatable with nce or dititrax dcc<br />
systems?<br />
Krauss-Maffei<br />
Posted by Dick on December 31, 2003, 01:59pm<br />
Just wondering, has anyone<br />
successfully installed (modified)<br />
Rivarossi's Krauss-Maffei models to<br />
run on SoundTraxx DCC?? I has a few<br />
K-M's that I would really like to run with the rest of my fleet. Any<br />
help would appreciated.<br />
Krauss-Maffei<br />
Posted by Dick on December 31, 2003, 01:59pm<br />
Just wondering, has anyone has successfully installed (modified)<br />
Rivarossi's Krauss-Maffei models to<br />
run on SoundTraxx DCC?? I has a few<br />
K-M's that I would really like to run with the rest of my fleet. Any<br />
help would appreciated.<br />
DCC for Bachman On30 Gas Mechanical<br />
Posted by Larry on December 10, 2003, 01:36pm<br />
I have a Bachman On30 Gas Mechanical Side Rod engine. It is<br />
DCC ready for plug and play. What decoder is the right size and<br />
configured for this locomotive?<br />
Re: DCC for Bachman On30 Gas Mechanical<br />
Posted by Don H. on December 16, 2003, 09:14pm<br />
Do you mean the Shay?<br />
Soundtraxx has a decoder for this:<br />
DSD-B2TSLC - for the Bachmann On30 Two-Truck Shay<br />
Hope this helps.<br />
Lenz LE1014 decoder - speed curve help!<br />
Posted by Jason Shron on December 01, 2003, 05:24am<br />
HI all,<br />
I have three Lenz LE1014 decoders purchased from <strong>Tony's</strong>. As far<br />
as I can tell, the only way I can adjust the speed of my locomotives<br />
is by making a complex user-defined speed curve.<br />
This is the first decoder I have encountered that doesn't do the work<br />
for me with Vmid and Vmax settings.<br />
Is there a way to set the Vmid and Vmax on the LE1014? I do not<br />
have the time or the software to program a user defined speed curve<br />
- that would seem like a great deal of work when other decoders<br />
<strong>Original</strong> Tony’s <strong>Train</strong> <strong>Exchange</strong> <strong>Web</strong> <strong>Bulletin</strong> <strong>Board</strong> <strong>System</strong>, 1998-2007