C14_SIPA Magazine_issue4_2013_uk.pdf

_30
A gooD pArtnership
since 2010, siPa has supplied
Zhuhai Zhongfu with a PPs
48/12 preform production
system, an sfl 2/2 linear
stretch-blow molding line, two
sfr 24 eVo rotary stretch-blow
molding units, one for hot-fill,
one for carbonated soft drinks
- all of these complete with all
the necessary molds. Zhuhai
around tHe GloBe - cHina
Zhongfu has also taken nine sets
of hot halves from siPa, and
some 250 blow mold cavities.
siPa is particularly proud of the
sfr 24 eVo Csd it supplied
in 2011. The line is used for
making bottles for a Coca-
Cola’s plant in lanzhou, north-
West China. The line is able to
produce a range of bottle sizes
including 0.5, 0.6, 1.25 and
2.0 l, has an output of 40,000
bottles per hour.
increAsing output
with sipA rotArY
BlowMolDer sfr
The sfr 24 eVo is a very
versatile piece of equipment.
should Zhuhai Zhongfu choose,
it can easily switch from
production of standard bottles
to hot-fill types. The sfr 24
eVo is also very well suited to
production of the latest very
lightweight bottles. and with
electricity consumption being
so critical in China, Zhuhai
Zhongfu will appreciate the
sfr 24 eVo’s small appetite
for energy. low footprint and
economic maintenance costs
are further factors working in
its favour! Mr. simon Wang
(General Manager of Zf group)
at Zhuhai Zhongfu says his
company choses siPa for several
reasons, not least among them
being the company’s ability to
supply and install complete
lines, as well as the fact that siPa
has production of equipment
and molds in China, as well
as local sales and good service
support “There is already a good
cooperation between siPa and
Zf now so i hope and believe
that siPa and Zf will have more
in the future” Mr. simon Wang
says.
From left to right is: Mr. Song Fujun (ZF Production Manager) Mr.Yun Wenli
(ZF Plant Manager) Mr. Dinevio Lorenzon, SIPA, Thomas Zhu, SIPA and
Mr. Kong Deshan(Technical director of ZF Group)
_31