LC-13B8U-S LC-15B8U-S LC-15B9U-SM
LC-13B8U-S LC-15B8U-S LC-15B9U-SM
LC-13B8U-S LC-15B8U-S LC-15B9U-SM
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>LC</strong>-<strong>13B8U</strong>-S<br />
<strong>LC</strong>-<strong>15B8U</strong>-S<br />
<strong>LC</strong>-<strong>15B9U</strong>-<strong>SM</strong><br />
PUBLIC MODE SETTING PROCEDURE<br />
1. How to start Public Mode<br />
» There are the following two ways to get the public mode setup screen displayed.<br />
1 1) Press the "INPUT" and "VOL (+)" keys on the set at once and turn on the power.<br />
2) Get the password input screen displayed.<br />
Procedure<br />
» The input starts with the leftmost digit.<br />
» Use the numeric keys [1] thru [9] and [10/0] keys on the remote controller.<br />
The other keys are not acceptable.<br />
» With a numeric-key input, "–" will change to " ". The input position<br />
will move one digit to the right.<br />
» With all the 3 digits entered, the password will be verified.<br />
3) The 3-digit password is now verified.<br />
The password [0] [2] [7] provides for the public mode screen. (This screen comes on with whatever<br />
adjustment process settings.)<br />
With any other passwords, the screen changes to the normal mode.<br />
2 In the adjustment process mode, turn on "PUBLIC MODE". Also press the "CH (ù)" and "VOL (+)" keys on<br />
the set at once and turn on the power.<br />
22