LC-13B8U-S LC-15B8U-S LC-15B9U-SM

More documents

Recommendations

Info

LC-13B8U-S LC-15B8U-S LC-15B9U-SM 5. On Setting Items * "EZ-SETUP" discussed below indicates "EZ-SETUP after the first power-on". (1) MAXIMUM VOLUME Selection Default Explanation Limit in Setting Exception Remarks (2) VOLUME FIXED Selection Default Explanation Limit in Setting Exception Remarks Adjustment from 1 to 60 (no loop) 60 Sound volume can not be adjusted higher than the preset value. » When the sound volume is set lower than 59, only figures are displayed and the sound volume bar is not displayed. » The maximum sound volume for ON-timer (Wake up timer) is limited also to the preset value. » In the item "VOLUME" of adjustment process, the sound volume can be set freely irrespective of this setting. » Setting is valid only for the speakers of the unit. (As for the headphone, the sound volume can be set up to 60 irrespective of the limit.) » In line output (sound volume variable), the sound volume can be adjusted from -60 to 0 irrespective of pre-adjusted value. » When the sound volume is set higher than the MAX setting by the adjusting process or headphone, the sound volume control operation is prohibited for turn-up and the sound volume should be turned down to MAX in this state. Selection between "Variable" and "Fixed" (loop provided) Variable Sound volume is fixed and made invariable. » The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the setting is made impossible. (Basically, the menu is not displayed.) » The following keys become invalid: » Sound volume Up/Down (VOL +/-) [for both remote control and the unit] » Mute (MUTE) » In the item "VOLUME" of adjustment process, the sound volume can be set freely irrespective of this setting. » In "Variable" setting, the sound volume had been conventionally set at 1 but this operation has been abolished (and follows the last memory). » The sound volume for the ON-time is not set at 1 either and the sound volume set value of the ON-timer before executing the hotel mode is held. » Setting is valid only for the speakers of the unit. (As for the headphone, the sound volume can be set up to 60 irrespective of the limit.) » In line output (sound volume variable), the sound volume can be adjusted from -60 to 0 irrespective of pre-adjusted value. » As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority. » Once the sound volume has been changed by adjustment process or headphone, it should be set back to the sound volume preset by sound volume fixing level when the adjustment process ends or when the headphone is removed. 24
(3) VOLUME FIXED LEVEL Selection Default Explanation Limit in Setting Exception Remarks (4) R/C BUTTON Selection Default Explanation Limit in Setting Exception Remarks (5) PANEL BUTTON Selection Default Explanation Limit in Setting Exception Remarks (6) MENU BUTTON Selection Default Explanation Limit in Setting Exception Remarks Adjustment from 1 to 60 (no loop) 20 The sound volume to be fixed by "Volume fixed" is determined. None None Setting is valid only when "Volume fixed" is selected for "fixed". This must be confirmed actually by changing also the sound volume in accordance with setting. 25 LC-13B8U-S LC-15B8U-S LC-15B9U-SM Selection between "Respond" , "Limited" and "No respond" (loop provide) Respond Keys acceptable by remote control are limited or reception of keys can be prohibited. 1In "limited" setting, only power ON/OFF, sound volume '", tuning '" and BACKLIGHT (brightness sensor) are accepted. 2In "No respond" setting, all the keys (including the power key) are not accepted. » Adjustment process, factory setting, inspection process and hotel only keys are valid irrespective of setting. » All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting. » All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting. Selection between "Respond" and "No respond" (loop provide) Respond All the operations by keys (except the power key) of the unit can be invalidated. » Inspection mode and hotel menu mode can be started irrespective of setting. » All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting. » In U.S.A model, all the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting. Selection between "Respond" and "No respond" (loop provide) Respond In "No respond" setting, the menu operation by the menu key of the remote control and the menu key of the unit are invalidated. » ON-timer (Wakeup Timer) is turned OFF. » The following keys become invalid. Wake-up timer and clock setting keys and all of the direct change keys to menu display » Inspection mode and hotel menu mode can be started irrespective of setting. » All the keys can be used in adjustment process, inspection mode and hotel menu irrespective of setting. » All the keys can be used also in the initial EZ-Setup after power-ON irrespective of setting.
Page 1 and 2: SERVICE MANUAL MODELS LC-13B8U-S LC
Page 3 and 4: PRECAUTION: POUR LA PROTECTION CONT
Page 5 and 6: Items SPECIFICATIONS 5 LC-13B8U-S L
Page 7 and 8: Preparation Part Names of the Remot
Page 9 and 10: REMOVING OF MAJOR PARTS 1. Remove t
Page 11 and 12: » Precautions in handling the LCD
Page 13 and 14: ADJUSTING PROCEDURE OF EACH SECTION
Page 15 and 16: Reference (Onscreen display of adju
Page 17 and 18: 17 LC-13B8U-S LC-15B8U-S LC-15B9U-S
Page 19 and 20: DVP ADJUSTMENT PROCESS ITEMS Page N
Page 21 and 22: DEFAULT CHART OF ADJUSTMENT PROCESS
Page 23: 23 LC-13B8U-S LC-15B8U-S LC-15B9U-S
Page 27 and 28: No Power (Power LED indicator still
Page 29 and 30: No pictures come out . No Input 1 p
Page 31 and 32: No colors come out. No S video colo
Page 33 and 34: 1-2. Pin Functions Pin No. Pin Name
Page 35 and 36: 2. IC801(RH-iXB150WJZZQ) 2-1. Pin C
Page 37 and 38: Pin No. Pin name Function Pin statu
Page 39 and 40: 39 LC-13B8U-S LC-15B8U-S LC-15B9U-S
Page 41 and 42: D1:Pb,Pr REG. IC805 10 3.3V A-D CON
Page 43 and 44: 10 11 12 13 14 43 15 LC-13B8U-S LC-
Page 45 and 46: H G F E D C B A SCHEMATIC DIAGRAM
Page 47 and 48: 10 11 12 13 14 47 15 LC-13B8U-S LC-
Page 49 and 50: 10 11 12 13 14 49 15 LC-13B8U-S LC-
Page 51 and 52: 10 11 12 13 14 51 15 LC-13B8U-S LC-
Page 53 and 54: 10 11 12 13 14 53 15 LC-13B8U-S LC-
Page 55 and 56: 10 11 12 13 14 55 15 LC-13B8U-S LC-
Page 57 and 58: 10 11 12 13 14 57 15 LC-13B8U-S LC-
Page 59 and 60: 10 11 12 13 14 59 15 LC-13B8U-S LC-
Page 61 and 62: 10 11 12 13 14 61 15 LC-13B8U-S LC-
Page 63 and 64: 10 11 12 13 14 63 15 LC-13B8U-S LC-
Page 65 and 66: 10 11 12 13 14 65 15 LC-13B8U-S LC-
Page 67 and 68: 10 11 12 13 14 67 15 LC-13B8U-S LC-
Page 69 and 70: 10 11 12 13 14 69 15 LC-13B8U-S LC-
Page 71 and 72: 10 11 12 13 14 71 15 LC-13B8U-S LC-
Page 73 and 74: 10 11 12 13 14 73 15 LC-13B8U-S LC-
Page 75 and 76:
10 11 12 13 14 75 15 LC-13B8U-S LC-
Page 77 and 78:
10 11 12 13 14 77 15 LC-13B8U-S LC-
Page 79 and 80:
10 11 12 13 14 79 15 LC-13B8U-S LC-
Page 81 and 82:
81 17 16 19 18 15 14 13 12 11 10 LC
Page 83 and 84:
10 11 12 13 14 83 15 LC-13B8U-S LC-
Page 85 and 86:
85 17 16 19 18 15 14 13 12 11 10 LC
Page 87 and 88:
10 11 12 13 14 87 15 LC-13B8U-S LC-
Page 89 and 90:
89 17 16 19 18 15 14 13 12 11 10 LC
Page 91 and 92:
10 11 12 13 14 91 15 LC-13B8U-S LC-
Page 93 and 94:
93 17 16 19 18 15 14 13 12 11 10 LC
Page 95 and 96:
PARTS LIST Ref. No. Part No. ★ De
Page 97 and 98:
Ref. No. Part No. ★ Description C
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
105 6 5 4 3 2 1 A B C D E F G H LC-
Page 107 and 108:
107 6 5 4 3 2 1 A B C D E F G H LC-
Page 109 and 110:
ËLC-15B8U-S ËLC-15B9U-SM ËLC-13B
show all

LC-13B8U-S LC-15B8U-S LC-15B9U-SM

Create successful ePaper yourself

Delete template?

Save as template?