TECHNICAL SPECIFICATIONS - LISEGA

8.3.2 Extra paint layer
Over the standard paint coating according to
8.1.3, a third protective layer consisting of a
2-component acrylic polyurethane coating is
applied. Dry film thickness 2.36 mil [60µm],
color RAL 5012 - light blue, total dry film
thickness app. 7.085 mil [180µm].
8.4 Extended surface protection in order of products acc. to 8.3
Product Type Electrogalvanization with Extra paint coating
add. coating acc. to 8.3.1 acc. to 8.3.2
Constant hangers, constant supports
Supports for constant hangers
Spring hangers, sway braces
Spring supp. (incl. load group 9)
Spring hangers
Spring supp. (from load group 10)
Rigid struts
Shock absorber extensions
Eye nuts, clevises
Turnbuckles, rod couplings
Hexagon nuts, tie rods
Threaded rods, stud bolts
Trapezes
11 - 17
71
21, 25, 27
20, 29
22, 26
28
39
33
60, 61,
62, 64
63, 65,
66, 67
79
8.5 Surface protection in extremely
aggressive atmospheres
For applications in specially aggressive atmospheres,
e.g. coastal areas, certain industrial
gases or offshore, special measures are to be
agreed on.
9. CONNECTION DIMENSIONS
9.1 Installation dimension E
For the simple determination of minimum
installation lengths, the installation dimension
E is given for all components except the
connecting rods (Product Group 6). This
dimension comprises the installation length
minus the engaging length of the connecting
part. For load chains, the E therefore designates
the complete rod section.
Special product-related features are to be
taken into account as follows:
x
x
8.3.3 Hot dip galvanizing
Hot dip galvanized surface, layer thickness
approx. 2.36 mil [60µm], bolts approx.
1.57 mil [40µm].
8.3.4 Stainless steel
For the connecting parts of shock absorbers,
energy absorbers (E-Bars) and rigid struts,
stainless steel designs can be supplied.
x
x
x
x
x
x
x
Hot dip galvanizing
acc. to 8.3.3
To determine the total length of the rods in
a load chain, all the E dimensions are to be
added together. The sum of these is then to
be compared with the total installation length.
If the resulting difference is greater than the
sum of the engagement depths (X dimensions),
the chain selected is appropriate for the total
installation height.
For load chains consisting solely of pin connections,
the minimum installation dimension
follows from the sum of all E dimensions.
x
x
x
x
0
Simple checks for
installation possibilities
through dimension “E” !
0.12