HHPC-2 Handheld Airborne Particle Counter Operator Manual
HHPC-2 Handheld Airborne Particle Counter Operator Manual
HHPC-2 Handheld Airborne Particle Counter Operator Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
18 of 46 Setting up the <strong>HHPC</strong>-2 - <strong>HHPC</strong>-2 <strong>Handheld</strong> <strong>Particle</strong> <strong>Counter</strong><br />
<strong>Operator</strong> <strong>Manual</strong><br />
The units selected appear in the right column on the Main Screen.<br />
Concentration or Totalize Mode<br />
1) Make sure the unit is set to Concentration or Totalize mode as described in “Selecting<br />
Count Mode” on page 16.<br />
2) On the Main Screen, press the Mode key twice.<br />
The bottom line displays the current volume setting.<br />
3) Press and hold the Mode key for one second, until two beeps are heard.<br />
The Select Volume screen appears and displays the selected volume as shown in<br />
Figure 2-6.<br />
Fig 2-6 : Select Volume Screen<br />
4) To review the sample volume choices, press either the Start/Stop key or the Mode key.<br />
Sample volume choices are listed in Table 2-2.<br />
Table 2-2 : Sample Volume Choices<br />
Volume Time for Sample (MM:SS)<br />
0.01 cubic feet 00:06<br />
28.3 cubic liters 10:00<br />
10.0 cubic liters 03:53<br />
2.83 cubic liters 01:00<br />
KSS - March 2005 - Edition 2
Change language