HHPC-2 Handheld Airborne Particle Counter Operator Manual
HHPC-2 Handheld Airborne Particle Counter Operator Manual
HHPC-2 Handheld Airborne Particle Counter Operator Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
30 of 46 Maintenance - <strong>HHPC</strong>-2 <strong>Handheld</strong> <strong>Particle</strong> <strong>Counter</strong><br />
<strong>Operator</strong> <strong>Manual</strong><br />
Recharging a Completely Drained Battery<br />
If the <strong>HHPC</strong>-2 will not turn on:<br />
1) Attach the external power supply to the unit.<br />
2) Wait five minutes, then turn on the <strong>HHPC</strong>-2.<br />
3) Leave the unit attached to the power supply until the battery charging indicator light is<br />
extinguished.<br />
5.2 Re-calibrating the <strong>HHPC</strong>-2<br />
The <strong>HHPC</strong>-2 must be returned annually for re-calibration to comply with JIS B 9921-1997<br />
standards. The calibration date is displayed on the manufacturer's decal on the back of the unit.<br />
Follow the instructions in the “Return Procedures” on page 33 to return the <strong>HHPC</strong>-2 for recalibration.<br />
5.3 Obtaining Service<br />
If the <strong>HHPC</strong>-2 requires factory service, follow the instructions in “Return Procedures” on<br />
page 33 to return the <strong>HHPC</strong>-2.<br />
KSS - March 2005 - Edition 2