FR60 FAMILY EMA-MB91FV460B-001 - Fujitsu

More documents

Recommendations

Info

11 FPGA History EMA-MB91FV460B-001 Chapter 11 FPGA History 11.1 EMA-MB91FV460B-001 FPGA Rev. 1.0 Initial version. Known limitations: 1. Reset behaviour o Conditions: MB2198 emulator system is connected and used Program is running (not in “break” state) A reset occurs (external or via Softune Workbench command) o Problem description: EMA-MB91FV460B-001 stays in a self-locked reset state if the conditions above apply. This problem is caused by a wrong implementation of the reset logic in the FPGA. Follow the power off sequence if the problem has occurred o Workaround: None (make sure no reset is applied) 11.2 EMA-MB91FV460B-001 FPGA Rev. 1.1 Fixed issues: 1. Corrected reset behaviour. Known limitations: 1. Trace data conversion for GreenHills SuperTraceProbe not working properly o Conditions: CLKB > 80 MHz GreenHills SuperTraceProbe is used for trace data gathering (onboard trace memory for use with Softune Workbench or Accemic topICE is not affected!) o Problem description: Trace data gathered by the GreenHills SuperTraceProbe is erroneous if the CPU clock (CLKB) is higher than 80 MHz. The trace contains wrong data and/or missing packets. This problem was caused because the predecessor EMA-MB91V460A-003 with the MB91V460A was limited to 80 MHz and therefore the FPGA code could not be validated for higher frequencies. o Workaround: None 11.3 EMA-MB91FV460B-001 FPGA Rev. 1.2 Fixed issues: 1. Trace data conversion now working up to 100 MHz New features: UG-910082-16 - 44 - © Fujitsu Microelectronics Europe GmbH
EMA-MB91FV460B-001 Chapter 11 FPGA History 1. FPGA version information output at board power-on Right after power-on of the EMA-MB91FV460B-001 a frequency can be measured at LED2 that indicates the programmed FPGA version. Please refer to 4.3.19 for more information about the frequencies © Fujitsu Microelectronics Europe GmbH - 45 - UG-910082-16
Page 1 and 2: Fujitsu Microelectronics Europe Use
Page 3 and 4: Warranty and Disclaimer EMA-MB91FV4
Page 5 and 6: EMA-MB91FV460B-001 Contents 4.3.12
Page 7 and 8: 1 3 C D E Figure 1-1: System compon
Page 9 and 10: 1.3 Features EMA-MB91FV460B-001 Cha
Page 11 and 12: 1.5 System Overview Figure 1-3: Sys
Page 13 and 14: 2 Installation 2.1 Assembly EMA-MB9
Page 15 and 16: 2.3 Disassembly instructions EMA-MB
Page 17 and 18: 3 Quick Start Overview EMA-MB91FV46
Page 19 and 20: 4.1.3 Switches Overview EMA-MB91FV4
Page 21 and 22: R112 R102 R103 R101 R104 CON100 EMA
Page 23 and 24: EMA-MB91FV460B-001 Chapter 4 Operat
Page 25 and 26: 4.3.7 FPGA mode control (S100-1) EM
Page 27 and 28: 4.3.10 HWWDG_KILL (S100-8) EMA-MB91
Page 29 and 30: 4.3.17 FPGA ready LED (D303) D303:
Page 31 and 32: EMA-MB91FV460B-001 Chapter 4 Operat
Page 33 and 34: EMA-MB91FV460B-001 Chapter 5 Extern
Page 35 and 36: EMA-MB91FV460B-001 Chapter 6 Progra
Page 37 and 38: EMA-MB91FV460B-001 Chapter 6 Progra
Page 39 and 40: EMA-MB91FV460B-001 Chapter 7 Precau
Page 41 and 42: 8 Troubleshooting EMA-MB91FV460B-00
Page 43: 10 PCB History EMA-MB91FV460B-001 C
Page 47 and 48: 13 China-RoHS regulation This board

FR60 FAMILY EMA-MB91FV460B-001 - Fujitsu

Create successful ePaper yourself

Delete template?

Save as template?