View Full Issue - Thomas Industrial Media

More documents

Recommendations

Info

30 <strong>Issue</strong> N°11 • November 2007 SLI: Get detailed info within seconds by internet www.tim-info.com/ien or by e-mail. See page 44 for instructions. For SLI: enter 14759 at www.tim-info.com/ien For SLI: enter 15275 at www.tim-info.com/ien For SLI: enter 16195 at www.tim-info.com/ien Single Board Computer 64bit, needs only one slot Equipped with Intel’s latest Core 2 Duo processor T7500 with a frequency of 2.2GHz, optionally also with L7500 or U7500, the F18 is the highest-performing member of the Intelbased CompactPCI Single Europe product family. The 64bit board provides a 667/800-MHz frontside bus and high performance graphics, which accelerate above all digital image processing such as CAD tools, 2D/3D modeling, video and rendering applications. The F18 is a 32bit/33 MHz system slot or stand-alone board and needs only one slot on the CompactPCI bus. In combination with a PCI Express side card the F18 can also be used as a system slot board in CompactPCI Express systems. Thanks to a fast, soldered 4GB DDR2 SDRAM, a CF slot and a SATA hard disk slot the F18 offers abundant memory space. MEN MIKRO ELEKTRONIK Tel. +49-911-993350 • Fax +49-911-99335901 For SLI: enter 20462 at www.tim-info.com/ien Heatsink Enclosures allow in situ adjustment of electronics The Lawtronics HSK extruded aluminium units consist of two sliding channels together with end panels. This arrangement enables the electronics to be worked on in situ when the top half of the casing is slid open. The free-standing or 3U rack mount models provide a rugged, low thermal impedance housing for sensitive electronics. Eurocard boards can slide into internal card guides, enabling power devices to be attached to the heatsink section of the vertical wall with an M3 screw and half nut, with no need for drilling. Two boards can be mounted within the black anodised enclosure, and standard spacers can be used to support heavy components. Available in 160 or 220mm lengths, they have a normal wall thickness of 2mm, increasing to 7mm adjacent to power devices. Internal and external M4 nut 'T' slots are provided for mounting. ASTROSYN Tel. +44-1634-815175 • Fax +44-1634-826552 For SLI: enter 20654 at www.tim-info.com/ien High Voltage Modules fibreglass-strengthened housing The HiPro HV- Module is designed for voltages up to 13kVDC (nominal voltage) and a rated current of up to 30A. Recessed Cucrimp-contacts ensure high damage and safety protection and can be attached to different wire gauges from 0,5 – 4,0mm 2 . The PTFE HV-Module withstands voltages up to 15kVDC and a rated current up to 25A. It is available either as one-pin or twopin configuration. Resistant against heat and creepache current, the module can also withstand pulsed voltages. Both modules are constructed within a molded and fibreglass-strengthened housing and can be operated in temperature ranges from -40 to 125°C. The modules are inserted into a fixation frame and then into an IP65 cast steel-housing available in different sizes with a wide variety of locking-systems, cable-entries and –glands. GES ELECTRONIC & SERVICE Tel. +49-8165-95020 • Fax +49-8165-950215 For SLI: enter 20461 at www.tim-info.com/ien Current Generator programmable, multi-channel The Yokogawa GS820 multi-channel source/measure unit is a programmable DC voltage and current generator capable of high-speed and highly accurate measurement of the voltage, current and other characteristics of semiconductor devices and other electronic equipment. The GS820 is capable of accurate voltage and current generation. The unit also features a USB storage function. The GS820 can simultaneously generate and measure two different types of signal. Since up to four units can be connected to one master unit, it is possible to expand the input/output capacity to a maximum of 10 channels, making it possible for the GS820 to simultaneously measure many functions of multi-terminal and multifunctional semiconductor devices. Parameters such as signal output switchover, signal output range switchover, and measurement data acquisition times can each be measured in approximately 1ms. YOKOGAWA Tel. +31-33-4641611 • Fax +31-33-4641859 For SLI: enter 20535 at www.tim-info.com/ien Fanless Box PC lower power consumption The IS-2100, a tiny Box PC as a fanless solution it also provides small dimensions of only 196.3 (W) x 68 (H) x 120 (D) mm. The embedded control system comes equipped with an ADE-2100 board and VIA V4 Bus Eden 1.0 GHz CPU to provide lower power consumption with 5.5W. Due to integrated chipset CX700M the Box PC can be equipped with DDR2 400/533 SODIMM memory up to 1GB. Graphic buffer size goes to 128MB with MPEG-2/4 decoding supported and provides dual display with VGA and DVI. The device can install one 2.5" HDD and provide one CF socket, two serial ports, dual Ethernet controllers, and six USB 2.0 ports for communication with diverse devices with a high transfer rate. Coming with the single +12V DC-in power input and an optional VESA kit for most wall mounts or the flat panel mounting, it adapts to various environments. LEAD Tel. +49-221-954790 • Fax +49-221-95479-88 For SLI: enter 20531 at www.tim-info.com/ien Touchscreen Display with improved functions An new HG1F touchscreen display has a bright (500 cd/m 2 ) high contrast monochrome LCD with a resolution of 300x100 pixels and carries sixteen adjustable brightness levels. An analogue touch panel means objects can be expanded from the minimum 16x16 pixel size and placed anywhere on the screen. The ability to display your application in landscape or portrait mode with scrollable pages means the HG1F can handle most complex tasks. High speed O/I links means up to 16 HG1F units can be connected together for sharing of information and when connected to a PLC, ladder programming is possible if the pass through programming mode is selected. The thin housing has all connection/access points at the rear, RS232, RS485, programming, replaceable battery and with a depth of only 35mm means the HG1F can fit into the smallest of spaces. IDEC ELECTRONICS Tel. +44-1256-321000 • Fax +44-1256-327755 For SLI: enter 18712 at www.tim-info.com/ien
SLI: Get detailed info within seconds by internet www.tim-info.com/ien or by e-mail. See page 44 for instructions. Connector Jack with magnetic filter and LED light pipes The Y-ConJack-31 is a new RJ45 connector jack for PCB with integrated magnetic filter, and LED light pipes for the function display. The jack is particularly suited to industrial applications such as industrial Ethernet. The 90°-angled jack for the THR PCB is fitted with an all-round optimised EMV shielding made of nickel-plated brass. The two integrated light pipes on the left and right next to the mating face lead the light forwards onto each of the LED light sources mounted onto the PCB, hence emitting a function signal. The colour selection is dependent only on the LED that is used, hence making the jack very flexible for all applications. The jack is fitted with data contacts and two additional power contacts. These power contacts are universally integrated into all components. This makes costly double wiring superfluous for electrical supplies, which would have to be protected especially for raw field applications. YAMAICHI ELECTRONICS Tel. +49-89-451090 • Fax +49-89-45109110 For SLI: enter 20715 at www.tim-info.com/ien Digital I/O Scan Test Module testers provide flexibility The JT 2111/MPV Digital I/O Scan (DIOS) module adds programmable voltages to facilitate the enhanced testing of complex printed circuit boards. When connected to a circuit board via edge connector or fixture test pins the module enhances regular interconnect tests by exercising the board's connections in synchronisation with native boundary-scan components. The module features PLDs (Programmable Logic Devices) and a 10MHz oscillator, so can be programmed to perform more custom functional and pattern tests. The hot-swap feature offers improved test throughput by allowing test targets to be connected/disconnected from the fixture without cycling power. 100% backward compatibility is ensured by simulation of the former DIOS devices. Both output and input thresholds can be programmed to 1.5, 1.8, 2.5 or 3.3V. The I/O channels are grouped into blocks of 16 channels and, any number of 16-channel groups can be bypassed. Up to 10 modules can be daisy-chained together. JTAG TECHNOLOGIES Tel. +31-40-2950870 • Fax +31-40-2468471 For SLI: enter 20185 at www.tim-info.com/ien Networking Gateway supports Ethernet and Wi-Fi The E2W/ESL1 is a pluggable extension for the DIL/NetPC ADNP/9200, allowing integration of this compact computer module into IEEE802.11 Wi-Fi networks. The E2W/ESL1 expansion is attached directly to the DIL/NetPC. The AD- NP/9200 owns two completely independent 10/100Mbps LAN interfaces with separate MAC and PHY-units. Both interfaces are controlled by the 180MHz ARM9 processor. The memory equipment consists of 32MB Flash and 64MB SDRAM. The Flash includes an Embedded Linux with appropriate drivers, a complete TCP/IP protocol stack and different servers. Beside the two Ethernet interfaces, there are four UARTs, three USB ports, one 16bit bus interface and numerous GPIOs available. With the possibility to add own software components and to execute them under the embedded Linux of the ADNP/9200, the platform is well-suited for acting as a wireless gateway for industrial Ethernet networks. SSV EMBEDDED SYSTEMS Tel. +49-511-4000045 • Fax +49-511-4000040 For SLI: enter 20450 at www.tim-info.com/ien Sifter in stainless steel The Quadro Sifter segregates, retains and allows for easy removal of impurities through its positive, 360° discharge. By prescreening material before entering downstream equipment, it reduces risk of contamination. YTRON-QUADRO Tel. +44-1494-792898 Fax +44-1494-792699 For SLI: enter 20453 at www.tim-info.com/ien Water-Jet cuts complex contours The compact Hydro-Jet Eco machine uses both pure-water and abrasive cutting, making precise cuts in a wide range of materials, including stainless steel, marble, granite, glass, ceramic materials and composites. KNUTH Tel. +49-4321-6090 Fax +49-4321-609140 For SLI: enter 20559 at www.tim-info.com/ien Control Valve for large flows The DBOY control valve line in sizes from 5 to 20cm is capable of large flows, allowing it to replace larger calibre valves. It can be customized and configured to meet the application's demand by utilizing cage guided trims that provide extra strength and rigidity. LESLIE CONTROLS Tel. +1-813-9781000 Fax +1-813-9780984 For SLI: enter 18896 at www.tim-info.com/ien Trusted Embedded Automation Computers Fanless, Cableless and Diskless Design For SLI: enter 15852 at www.tim-info.com/ien <strong>Issue</strong> N°11 • November 2007 31 Embedded Automation Computers Embedded Design without Moving Parts for Harsh Environments Embedded Linux, Windows CE & XP Embedded Ready Platform Compact Size with DIN-Rail/Wall/Panel/Desktop Mounting Options PC/104, PC/104+, PCI-104 and PCI Expansions UNO-1019 Intel XScale UNO With 2 x LAN, 4 x COM, CF Card UNO-2059E AMD GX2 UNO With 4 x COM, LAN, PC Card www.advantech.com/eA UNO-2182 Intel Core 2 Duo UNO With 2 x LAN, 4 x COM, DVI RoHS COMPLIANT 2002/95/EC For SLI: enter 14830 at www.tim-info.com/ien 83 SERIES UNO-3074 Intel Pentium M UNO With 4 x PCI, PC Card Modular timers 16 A Mono-function, multi-function and multi-voltage • Multi-voltage versions with “PWM clever” technology • Six time scales from 0.1s to 20h • High input/output isolation • “Blade + cross” - both flat blade and cross head screw drivers can be used • 22.5 mm wide • 35 mm rail (EN 50022) mount Europe Germany / Düsseldorf 49-211-97477-310 France / Grenoble 33-4-7670-4700 Italy / Milano 39-02-9544-961 Netherlands / Roosendaal 31-165-550-505 UK / Berkshire 44-1344-989-500 Produttore di relè e temporizzatori dal 1954 FINDER S.p.A. 10040 Almese (TO) Tel 011.9346211 Fax 011.9359079 ISO 9001:2000 ISO 14001:2004 ® catalogo on-line www.finder.it
Page 1 and 2: page page 20 page 10 THREE-PHASE MO
Page 3 and 4: INDUSTRY NEWS INDUSTRY NEWS INDUSTR
Page 5 and 6: SLI: Get detailed info within secon
Page 7 and 8: Viewer for inspection sensors The S
Page 9 and 10: Colour Sensors flexible in applicat
Page 11 and 12: The R-Series high performance senso
Page 13 and 14: For SLI: enter 15761 at www.tim-inf
Page 17 and 18: Drives and motors ACOPOSmulti from
Page 19 and 20: Brushless Motor optional IP67 versi
Page 21 and 22: Servo Motion Solution motors, ampli
Page 23 and 24: Exchange Engines and Parts fast, ec
Page 27 and 28: Control System Hard and software c
Page 29: SLI: Get detailed info within secon
Page 33 and 34: For SLI: 13201 at www.tim-info.com/
Page 35: SLI: Get detailed info within secon
Page 38 and 39: 38 Issue N°11 • November 2007 SL
Page 40 and 41: 40 Issue N°11 • November 2007 SL
Page 42 and 43: 42 Issue N°11 • November 2007 Fo
Page 44: SLI - Speed Link InfoService PRIMAR

View Full Issue - Thomas Industrial Media

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?