Electronic Price Computing Label/Receipt Printing Scale
Electronic Price Computing Label/Receipt Printing Scale
Electronic Price Computing Label/Receipt Printing Scale
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3 Proper Operation<br />
3.4 Cleaning and Maintenance<br />
1) The LP-2’s exterior should be cleaned with a damp cloth and a mild soap solution. Do not spray any<br />
chemicals directly onto the LP-2. Always spray any cleaning liquids onto the cloth rag you are using to<br />
wipe the scale clean. Remember NEVER to hose-down the scale. Before doing any type of cleaning,<br />
always make sure that the scale is turned OFF using the side COM Port Access Panel ON/OFF switch.<br />
Using the keyboard’s ON/OFF switch is NOT enough.<br />
The keyboards should be cleaned with a damp cloth rag soaked in a mild soap solution. Never<br />
spray water or any liquid directly on to the keyboard as these may cause damage to the keyboard’s seal<br />
and then further damage individual keys. DO NOT use solvents, harsh, or abrasive chemicals or cleaning<br />
devices as these may discolor and even completely remove the trim paint on the keyboards. If you<br />
require more thorough cleaning, contact your local Authorized CAS Dealer for service.<br />
The displays should be cleaned with a damp cloth rag soaked in a mild soap solution. Never<br />
spray water or any liquid directly on to the displays as these may cause damage to the display’s seal and<br />
possibly short out the scale’s electronic components. Also, these displays use very high voltages so special<br />
care should be taken never to wet them. DO NOT use solvents, harsh, or abrasive chemicals as these may<br />
discolor and even completely remove the wording on the displays. If you require more thorough<br />
cleaning, contact your local Authorized CAS Dealer for service.<br />
2) To clean the LP-2’s platter, please make sure that the scale is turned OFF using the side COM Port Access<br />
Panel ON/OFF switch. Using the keyboard’s ON/OFF switch is NOT enough. First, remove the platter from<br />
the platform and place it in a large tub or sink. You can wash it down with soap and high-pressure water<br />
and/or hot water. Before replacing the platter on the platform, make sure that it is completely dry.<br />
3) The printer compartment also needs cleaning; however, this process requires more careful cleaning.<br />
There are many sensitive parts as well as moving parts in the printer bay. Whenever doing anything in the<br />
printer bay, please make sure that the scale is turned OFF using the side COM Port Access Panel ON/OFF<br />
switch. Using the keyboard’s ON/OFF switch is NOT enough.<br />
To begin, turn the scale OFF via the ON/OFF switch located on the left side of the scale in the<br />
COM Port Access Panel. Next, open and remove the Printer Side Access Panel. With a small brush or<br />
toothbrush, remove all of the debris that has accumulated on the base of the printer bay. DO NOT<br />
attempt to remove any dirt or debris from anywhere else in the printer bay area. If you require more<br />
thorough cleaning, contact your local Authorized CAS Dealer for service. If you attempt to effect<br />
cleaning of other printer parts yourself, you risk damage to components or even electrical shock<br />
regardless of the scale’s ON/OFF status.<br />
4) The thermal print head also requires cleaning. It is recommended to clean the thermal print head every<br />
time you replace the label roll. You can clean the thermal print head with a cotton swab dipped in either<br />
a mild soap solution or isopropyl alcohol.<br />
13
Change language