HD3000 User's Guide - the Optoma Marketing Intranet.

More documents

Recommendations

Info

HD3000 User’s Guide Professional Video Scaler and Color Management System Note: Not all displays or projectors are capable of receiving and displaying their complete list of resolutions. Please refer to the documentation that came with your projector or display for the exact compatibility match. Certain versions of the HD3000 have been factory preset for a single output range. Output Resolution Selection HD3000 can use Menu to change the desired output resolution. 1. Press the “Menu” button on the remote to show the Menu. . Use “h”, “i” arrow keys to select SYSTEM category, press “Enter” or “g” key to enter this adjustment category 3. Use “h”, “i” arrow keys to select the “Output Resolution” item (as shown) 4. Press “Enter” key or “g” key to enter this item. The Menu disappears and a sub menu is shown (as shown below). 5. Use “h”, “i”, “f”, “g” arrow keys to locate the desired output resolution and press “Enter” to decide the resolution. 6. If the connected device/display can’t support the user-selected output resolution, then after a few seconds, the option bars moves back to the original output resolution. 7. Once the user selects and decides an output resolution, a confirmation notice is shown. Enter ”Yes” or “Cancel” to adopt the new selected output resolution, or cancel to return to the original output resolution. HD3000 User’s Guide 5
Firmware Upgrades HD3000 User’s Guide Professional Video Scaler and Color Management System You can download updated firmware from the Optoma on-line support center at www. optoma.com. Step 1: Connect PC/Notebook and HD3000 with RS232 Cable. Step : Execute the update program downloaded from the support center, and follow the instructions in the update program. HD3000 User’s Guide 53
Page 1 and 2: HD3000 User’s Guide Professional
Page 3 and 4: Table Of Contents Introduction.....
Page 5 and 6: Recommendations HD3000 User’s Gui
Page 7 and 8: Installation System Requirements HD
Page 11 and 12: Establishing Initial Output Resolut
Page 13 and 14: System Connections • • Front Pa
Page 15 and 16: Remote Control Remote Control and B
Page 17 and 18: Setup HD3000 User’s Guide Profess
Page 19 and 20: IMAGE DISPLAY SYSTEM SETUP Display
Page 21 and 22: SETUP SETUP Signal White Level Blac
Page 25 and 26: Other choices: Horizontal Horizonta
Page 31 and 32: ISF Modes For care-free operation,
Page 33 and 34: Display Settings HD3000 User’s Gu
Page 35 and 36: Image Shift Adjustment HD3000 User
Page 37 and 38: Edge Masking HD3000 User’s Guide
Page 39 and 40: Advanced Adjustments HD3000 User’
Page 51: System Adjustments HD3000 User’s
Page 57 and 58: Compatibility Computer Compatibilit
Page 59 and 60: Important Safety Instructions WARNI
Page 61 and 62: Appendices Optoma Global Office For

HD3000 User's Guide - the Optoma Marketing Intranet.

Create successful ePaper yourself

Delete template?

Save as template?