HD3000 User's Guide - the Optoma Marketing Intranet.

HD3000 User’s Guide
Professional Video Scaler and Color Management System
Option 1
Using the HD3000 Video Scaler as an audio/video source selector connecting to a HDMI
equipped AV receiver for audio. If you have an HDMI equipped AV receiver and wish to send
the audio signal to the receiver, but utilize the HD3000 as the HDMI source selector:
1) Connect the video sources to the HD3000.
2) Connect a HDMI cable to the “To AV Receiver” port on the back of the HD3000 to your AV
receiver. This will allow the audio signal to be decoded by the AV receiver.
3) Connect a second HDMI cable to the HDMI output of the AV receiver to the “From AV
Receiver” on the back of the HD3000.
4) Finally, connect a HDMI cable to the “To Display” on the back of the HD3000 to your display.
HD3000 User’s Guide 9