2009 QX Quick Reference Guide - Infiniti Owner Portal

media center
Copy from Outgoing Call Logs: Choose names/numbers from a list of calls
you have made.
Copy from Incoming Call Logs: Choose names/numbers from a list of calls
you have received.
Transfer via Bluetooth: Activates the Bluetooth ® connection. Depending on
your cellular phone, you may be able to transfer a person’s name and phone
number directly from your cellular phone phonebook to the vehicle’s phonebook
via Bluetooth ® . This procedure varies according to each manufacturer.
6 When the “Add a voicetag?” screen appears, highlight Yes and press ENTER to add a
voicetag (voice-activated speed dial command used with the INFINITI Voice Recognition
system).
7 After the tone, clearly say the name of the contact.
Making a Phone Call
1 Press the PHONE/TALK button on the steering wheel or the PHONE button
on the instrument panel.
2 Highlight Call (Phonebook), then press ENTER.
3 Highlight the name of the person you wish to dial, then press ENTER. Dialing will begin.
Increasing or Decreasing the Volume of Outgoing Calls
If you are told that the volume on your call is too loud or
too soft, perform the following steps to increase or
decrease volume:
1 Press the SETTING button .
2 Highlight Volume and Beeps, then press ENTER.
3 Highlight Outgoing Call, then press ENTER.
4 Adjust the outgoing call volume by rotating the
INFINITI Controller Center Dial.
Receiving a Phone Call
When you receive a phone call, the Phone menu screen will display and a ringing tone will
sound (if enabled) through your audio system.
To Accept a Call:
■ Press the PHONE/TALK button on the steering wheel.
■ Press the PHONE button on the instrument panel.
■ Highlight Answer on the Information Display screen, then press ENTER.
To Reject a Call:
Highlight Reject Call on the Information Display screen, then press ENTER.
Ending a Phone Call
To “hang up” your cellular phone at the end of a call or to disconnect during call placement:
■ Press the MODE/END button on the steering wheel.
■ Press the PHONE button on the instrument panel.
■ Highlight Hang up on the Information Display screen, then press ENTER.
24