DVD - Maplin Electronics
DVD - Maplin Electronics
DVD - Maplin Electronics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
- As soon as the display switches off in step 5 you need to press the key (in<br />
this example: the ”mono/stereo” key) on your original remote within<br />
15 seconds. If no key is pressed while in learning mode, the remote will<br />
return to user mode after 30 seconds.<br />
- During learning, keys such as (TV) menu, (TV) guide etc. will not change<br />
screen when pressed.<br />
- If you learn a function on a key, the original KAMELEON 8 function<br />
automatically becomes shifted. Press the MAGIC key then the key to access<br />
it (this excludes the POWER, Channel and Volume keys). If you learned on a<br />
digit key, access the original function by pressing magic twice and then<br />
the digit.<br />
- If you want to learn a function on a key that is not in the main screen, use<br />
the SCROLL key to change the screen.<br />
- The learning feature is mode specific. Therefore you can place one learned<br />
function per mode on the same key.<br />
- The KAMELEON 8 can learn approximately 50 functions. The amount of keys<br />
depends on the other programmed functions and on the remote to be<br />
learned from.<br />
- You can replace a learned function by placing another learned function on<br />
top.<br />
- Please make sure not to use the learning procedure when in direct sunlight<br />
or under incandescent lights.<br />
- Make sure you are using new batteries before following the learning<br />
instructions.<br />
- Upon changing the batteries, your learned functions will be retained.<br />
Shifted Learning<br />
Learning Feature<br />
It is also possible to place a function shifted on a key to maintain the original<br />
function.<br />
Example: to place the mono/stereo function shifted on the “red” key.<br />
To place the (e.g. mono/stereo) function shifted on the red key, simply follow<br />
steps 1-8 on page 15, only press ”MAGIC” then the ”red” key (instead of<br />
“I”) during step 5.<br />
To access the e.g. ”mono/stereo” function in this example; simply press<br />
”MAGIC” and then the ”red” key.<br />
- If a Shifted Learned function is placed on the Channel and Volume keys<br />
then the “Colour & Brightness“ features will be sacrificed.<br />
- If you place a function shifted on a digit key (0 - 9) you need to press<br />
MAGIC twice then the digit key to access this shifted function.<br />
16 WWW.ONEFORALL.COM