Results post processing

CHAPTER 1
Introduction to Results Postprocessing
Filtering Results. Filtering results is accomplished from the Select Result Cases
form which is accessible from the Results application when the first icon button
(Select Results) is active and multiple subcases exists. An icon button appears
when Result Cases are in their abbreviated form to access the filter form which can also be
accessed by clicking on the Result Case name.
Select Results Cases
Select Result Case(s)
Load Case 1, 41 subcases
Filter Method: Global Variable
Variable:
Time Min: 0. Max: 2.
Values: Above Value: 1
Filter
Selected Result Cases
Load Case 1, Time = 0.
Load Case 1, Time = 0.05
Load Case 1, Time = 0.1
Load Case 1, Time = 0.2
Load Case 1, Time = 0.3
Load Case 1, Time = 0.4
Load Case 1, Time = 0.95
Clear Remove
Apply Close
Select a Result Case from this listbox which
appears as a title with the number of subcases
associated with the Result Case(s). Only one
can be operated on at a time.
Select a method of filtering. The methods to
choose from are Global Variable, String, Subcase
Ids, and All. These are described in Table 1-1.
Set the appropriate criteria depending on the
Filter Method above.
Filters the subcases. The listbox below will fill with
the selected subcases.
Any subcases highlighted in the listbox below can
be removed by using this button.
Clears the Selected Result Cases listbox.
Every time the Filter button is pressed, new
results subcases will be added to whatever
existing results are already selected. To do a new
filter you must clear this listbox.
Makes the selected subcases active for
postprocessing. The number of selected subcases
will appear back on the main form. Use the Close
button to close the form down.
This form is expandable to allow you to view the entire Result Case names and global variable
if necessary.
1