Mai 2009 – Pages 01-44 - Farnell

V850ES/Fx3-CAN-IT!
Demonstration Kit
Mftrs List No. Description Order Code Price Each
V850FX3-CANIT 32 BIT CAN V850ES/FX3 Starter Kit 150-2863 1.703,25
Mftrs. List No Order Code Price Each
STM3210B-PRIMER 150-2504▲ 331,37
STM3210E-PRIMER
The V850ES/Fx3-CAN
it! is a demonstration
kit for the V850ES/Fx3
32-bit RISC microcon-
Starter Kit for STM3210B-
PRIMER
troller. It supports On-Board debugging via
the TK-V850 interface (monitor debugging)
or via N-Wire. Additional FLASH programming
and real time execution of application
programs based on the V850ES/FG3 32-bit
RISC microcontroller is supported by the V850ES/Fx3 - CAN it! demonstration kit. The board is
prepared to be connected to user hardware parts such as digital I/O or analogue signals.
Hardware Features of Primer
• The Primer plugs directly
into a host PC’s USB
The STM32 Primer is a uniquely
fun, easy, low-risk solution for
exploring and developing appli-
cations for the STM32 ARM
Mftrs. List No Description Order Code Price Each
STM3210E-PRIMER STM3210E-PRIMER 167-9751▲ 590,73
Kit Includes:
• 3x SmartRF05EB
• 3x CC2520EM evaluation modules
• 3x Antennas
This is a development and evaluating tool
for the STM32 ARM Cortex M3 corebased
microcontrollers.
Software Included
• RIDE7 development software toolset with project manager
• GNU C/C++ compiler
• Management application CircleOS task scheduler
• C source code for all sample applications & libraries
• 128x128 pixel color LCD
• MEMs sensor,
Cortex-M3 core-based microcontrollers.
Start exploring the power of the STM32 by playing
with the included applications. The STM32 drives the
fun, ergonomic hardware platform that combines a
TFT graphical display with MEMsbased controls,
plus tactile screen and joystick for navigating and
controlling the GUI and game applications.
When running the applications, the Primer can oper-
ate in standalone mode powered by a battery (with power management circuit), which is
recharged via the USB connection with a host PC.
CC2520 Development Kit
• Buzzer
• IrDA transceiver
The CC2520 Development Kit includes hardware and software that allows quick testing of the
CC2520 RF performance and offers a complete platform for development of advanced
prototype RF systems and for evaluation of the CC2520 right out of the box. The kit can be used
for range testing using the pre-programmed PER tester running on the MSP430F2618.
Use SmartRF Studio to perform RF measurements. The radio can be easily configured to
measure sensitivity, output power and other RF parameters. All I/O from the CC2520 are
available on pin connectors on the SmartRF05EB and on the CCMSP-EM, allowing easy
interconnection to other devices or controllers. These connectors are also compatible with
logic analyser probes for easy debugging.
• 2x CCMSP-EM430F2618
• 1x MSP-FET430UIF debug interface
• 3x USB cables
• Documents
Mftrs. List No. Description Order Code Price Each
CC2520DK CC2520 Development Kit 157-3886▲ 6.195,48
Find the latest products online at www.farnell.com
OMAP5912 Starter Kit
The OMAP5912 Starter Kit for Portable
Data Terminals is a low cost,
easy to use,
convenient way
of evaluating the
features of the
OMAP5912 Processor in next generation
PDT devices. The kit includes a
development board, and a collection
of board and chip specific libraries as
well as a suite of development tools
for Linux with an OMAP5912 specific Linux kernel. The kit allows users to get started on a
portable data terminal-based application and device development.
Hardware Features:
• 32 Mbyte Flash ROM
• ARM9 core operating at 192 MHz • 4 Expansion connectors (bottom side)
• DSP core operating at 192 MHz
• RS-232 Serial Port
• TLV320AIC23 Stereo Codec
• 10 MBPS Ethernet port
• 32 Mbyte DDR SDRAM
• USB Host Port
• Compact flash connector
• On board IEEE 1149.1 JTAG connector
for optional emulation
• +5 Volt operation
Mftrs. List No. Description Order Code Price Each
TMDSOSK5912-0E OMAP5912 Starter Kit 167-6435▲ 2.808,36
Z-Accel Demonstration Kit
Kit Includes:
• 3x CC2480 Target
Boards
Mftrs. List No. Description Order Code Price Each
EZ430-RF2480 Z-Accel Demonstration Kit 157-3888▲ 945,13
JN5139-EK020 Starter Kit
• 1x eZ430 USB Emulator Board
• 2x AAA eZ430 Battery Boards (batteries included)
The eZ430-RF2480 Demo Kit is a complete USB-based MSP430 wireless demonstration tool
providing all the hardware and software to evaluate the CC2480 2.4GHz ZigBee network
processor and the MSP430F2274 microcontroller. It has everything needed to understand and
fully evaluate the capabilities of CC2480 in a short amount of time with minimal effort.
This starter kit It is for
use with the JN5139
32-bit wireless micro-
controller. It provides
easy and rapid development of wireless networks
using the JenNet network stack or
IEEE802.15.4 standard. It supports Jennic’s
"Jenie" API and Serial "AT-Jenie" programming
interfaces, and is preloaded with the
following demonstrations: Wireless sensor
network, wireless serial link and serial AT.
Mftrs. List No. Description Order Code Price Each
JN5139-EK020 JN5139-EK020 AT-Jenie Starter Kit 156-5712● 1.459,26
Telefaks 800 146 76 800 146 70 www.farnell.no
Prices in NOK excluding moms
9
Development Tools
9