packaged terminal air conditioners - This is a secure site - Whirlpool
packaged terminal air conditioners - This is a secure site - Whirlpool
packaged terminal air conditioners - This is a secure site - Whirlpool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REMOVING THE HOT START RELAY<br />
AND HOT START SENSOR<br />
Electrical Shock Hazard<br />
D<strong>is</strong>connect power before servicing.<br />
Replace all parts and panels before<br />
operating.<br />
Failure to do so can result in death or<br />
electrical shock.<br />
1. Unplug <strong>air</strong> conditioner or d<strong>is</strong>connect power.<br />
2. Remove the front cover from the unit (see<br />
page 2-11 for the procedure).<br />
3. Lower the control chass<strong>is</strong> to access the<br />
components (see page 4-2 for the procedure).<br />
Hot Start Sensor<br />
Hot Start Relay<br />
4-6<br />
4. To remove the hot start relay:<br />
a) D<strong>is</strong>connect the wires from the relay<br />
<strong>terminal</strong>s.<br />
b) Remove the two hex-head screws from<br />
the relay and remove it.<br />
BR-Defrost<br />
Thermostat<br />
BU<br />
BK<br />
WH<br />
RD<br />
BR-Hot<br />
Start<br />
Sensor<br />
5. To remove the hot start sensor:<br />
a) D<strong>is</strong>connect the wires from the sensor<br />
<strong>terminal</strong>s.<br />
2 RD<br />
BR<br />
b) Remove the two hex-head screws from<br />
the sensor and remove it.<br />
Screw<br />
Screw<br />
Hot Start Sensor
Change language