AutoTrac Universal Addendum - StellarSupport - John Deere
AutoTrac Universal Addendum - StellarSupport - John Deere
AutoTrac Universal Addendum - StellarSupport - John Deere
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Line Sensitivities Too Low<br />
Step 3: Optimize Line Sensitivity<br />
A: Line Sensitivity—Tracking<br />
SETUP<br />
• Tune line sensitivity tracking while operating on the A-B<br />
line.<br />
• If machine wanders too far from the A-B line adjust line<br />
sensitivity – tracking higher.<br />
• If machine becomes unstable around A-B line adjust<br />
line sensitivity – tracking lower.<br />
B: Line Sensitivity—Heading<br />
• Tune line sensitivity heading while operating on the A-B<br />
line.<br />
• If the front of the machine wanders too far from the<br />
track direction adjust line sensitivity – heading higher.<br />
• If machine becomes unstable adjust line sensitivity –<br />
heading lower.<br />
NOTE: Line Sensitivities work together – If both are set<br />
too high the vehicle will become unstable. If both<br />
are set too low, the vehicle will wander around the<br />
A-B line<br />
PC8794 –UN–08MAR06<br />
Line Sensitivities Too High<br />
PC8999 –UN–08MAR06<br />
A—Desired Track—Broken Line<br />
B—Actual Track—Solid Line<br />
Continued on next page<br />
PC8795 –UN–08MAR06<br />
OUO6050,0001AFB –19–20MAR06–4/5<br />
25-7 032206<br />
PN=13
Change language