AutoTrac Universal Addendum - StellarSupport - John Deere

Foreword
IMPORTANT: The following addendum is to be used
only as a supplement to the GreenStar
Guidance, Parallel Tracking, and
AutoTrac Steering Systems operator’s
manual included with your AutoTrac
Universal Steering Kit.
WELCOME TO GREENSTAR PRECISION FARMING
SYSTEMS offered by John Deere. Parallel Tracking and
AutoTrac guidance systems are precision farming
packages. These guidance systems are intended to aid
operator to more efficiently operate machine.
Introduction
READ THIS MANUAL carefully to learn how to operate
and service your system correctly. Failure to do so could
result in personal injury or equipment damage. This
manual and safety signs on your machine may also be
available in other languages. (See your John Deere dealer
to order.)
THIS MANUAL SHOULD BE CONSIDERED a permanent
part of your system and should remain with system when
you sell it.
MEASUREMENTS in this manual are given in both metric
and customary U.S. unit equivalents. Use only correct
replacement parts and fasteners. Metric and inch
fasteners may require a specific metric or inch wrench.
RIGHT-HAND AND LEFT-HAND sides are determined by
facing in direction of forward travel.
WRITE PRODUCT IDENTIFICATION NUMBERS (P.I.N.)
in Specification or Identification Numbers section.
Accurately record all numbers to help in tracing
components should it be stolen. Your dealer also needs
these numbers when you order parts. File identification
numbers in a secure place off machine.
GREENSTAR is a trademark of Deere & Company
OUO6050,0000931 –19–21MAR06–1/2
032206
PN=2