System Manual SIMOCODE pro Edition 03/2007

System Description
Communication The "Communication" menu item displays all important information
concerning PROFIBUS communication.
For detailed information: See: "Status display for PROFIBUS
communication"
Device I/Os The "Device I/Os" menu item gives a complete overview of the
current status of all inputs and outputs of the basic device as well
as any connected expansion modules.
For detailed information: See: "Display of the current status of all
device I/Os"
Display Settings All settings relevant to the operator panel with display can be
carried out via "Display Settings". In addtion to selecting the
language and adjusting the contrast or lighting, it is also possible to
select the profiles here which are relevant for adjusting the main
display.
For detailed information: See: "Adapt display settings"
Commands The "Commands" menu item contains all commands relating to
SIMOCODE pro e.g. for testing the feeder, resetting after tripping
and/or adopting the parameters in the memory module or
SIMOCODE pro.
For detailed information: See: "Resetting, testing and
parameterizing via commands"
Status Information The "Status Information" menu item gives an overview of all
pending status information.
For detailed information: See: "Display of all pending status
information"
Table 1-9: Operator panel with display: menu and menu navigation (Cont.)
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 02 1-33