Instructions for Philips PW1830.pdf
Instructions for Philips PW1830.pdf
Instructions for Philips PW1830.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TROUBLESHOOTING<br />
The shutter will not open! Try putting the chamber door on again – the round button on<br />
The ‘No waterflow’ light is<br />
lit, and the machine<br />
appears to be off.<br />
The shutter is closing<br />
automatically of its own<br />
accord!<br />
the side of the X-ray tube housing must be fully pressed in<br />
be<strong>for</strong>e the instrument will recognise that it is safe to unleash<br />
the X-rays.<br />
If this button is fully in, check all the housing doors are fully<br />
closed and all interlocks in contact.<br />
There is also an interlock underneath the ‘top hat’<br />
arrangement (just on the chamber side be<strong>for</strong>e the secondary<br />
beam monochromator) – try pinching that closed.<br />
Finally, if the problem still persists, it is likely that one or<br />
both of the ‘Shutter Open’ bulbs has blown. Contact the Lab<br />
Manager.<br />
Last revised by N. Reeves-McLaren, 5 h January 2012.<br />
Low water pressure. Report to the Lab Manager.<br />
Probably someone has pressed the Shutter 2 ‘Clock’ button.<br />
Press the ‘∞‘ button, and try again.
Change language