Chapter 1 - ERTICO.com

Reference Point
Name
RP-RSQ-003
Vehicle-to-
Vehicle Interface
(VV-I)
RP-RSQ-004
IODEnd-
User
DEL_RSQ_3_1 Architecture and Interface Specifications
Collaboration Name Reference Point SP Contribution Reference Point
Criticality
• ESV – Send Warning Message
• PV – Receive Warning Message
• PV – ECALL Manual Cancelling
• PSAP1 - EOS
• ESV – Emergency Data Receipt
from PSAP2
• ESV – Emergency Data
Visualisation
• ESV – Display Route Options
• ESV – Accept Route Option
• ESV – Advise at Arrival Scene
• ESV – Activate Warning Message
Option
• ESV – Activate Warning
Messages
• ESV – Reset Transmission
• Two Vehicles can communicate with
each other to exchange traffic, safety
and other kind of information, using a
bearer-independent protocol.
• This link is needed for enabling Data
Message Exchange between
Emergency Vehicle and Public
Vehicle
• This link is necessary for Blue Wave
and Virtual Cones use cases.
• The communication between vehicles
is covered by PREVENT project
• The Emergency Vehicle Person
interacts with the Client System.
• Although it is not the intention of the
GST project to define the HMI used in
this interaction, certain restrictions and
requirements have to be defined and
required from the manufacturers of
GST-compliant automotive systems.
• On the other hand for RSQ project
HMI specifications consists of a
fundamental issue to be considered.
3/23/2006 46 Version 2.0
IP-level?
MUST X
MUST X