Technical Program

Condition based monitoring for industrial engines
Christian Strasser (AVL List GmbH, Austria); Christoph Pfister (AVL AUTOKUT Engineering Kft., Hungary)
Partial Discharge Estimation Based on Radiometric and Classical Measurements
Euler Tavares Macedo (Federal University of Paraíba, Brazil); José Maurício Neto (Federal University of
Campina Grande, Brazil); Juan Moises Mauricio Villanueva (Universidade Federal de Campina Grande, Brazil);
Edson C. Guedes (Federal University of Campina Grande, Brazil); Raimundo Freire (Federal University of
Campina Grande, Brazil); Ian A Glover (University of Strathclyde, United Kingdom)
14:15 - 16:45
Industrial: Alternative Vehicles
Room: KMS
Poster
High Precision Torque Measurement on a Rotating Load Coupling for Power Generation Operations
Peter Sue (GE Energy, USA)
A Monitoring System for the Use of Solar Energy in Electric and Hybrid Electric Vehicles
Christian Schuss (University of Oulu, Finland); Bernd Eichberger (Graz University of Technology, Austria); Timo
Rahkonen (University of Oulu, Finland)
Impedance measurements of ferrite core displacement sensors for flywheel energy storage systems
Manes Recheis (Graz University of Technology, Austria); Hannes Wegleiter (Graz University of Technology,
Austria); Bernhard Schweighofer (Graz University of Technology, Austria); Paul Fulmek (Vienna University of
Technology, Austria)
Image-Based Localization of Vehicle Parts Guided by Visual Attention
Ana-Maria Cretu (University of Ottawa, Canada); Pierre Payeur (University of Ottawa, Canada)
A simple measuring system for automotive damper wear estimation
Luca Ferrari (University of Modena and Reggio Emilia, Italy); Stefano Cattini (University of Modena and Reggio
Emilia, Italy); Luigi Rovati (University of Modena and Reggio Emilia, Italy); Andrea Bosi (R-Sens Srl, Italy)
System Identification Method for Ultrasonic Intake Air Flowmeter for Engine Test Bed Applications
Michael Tauch (Technische Universität Graz, Austria); Klaus Witrisal (Graz University of Technology, Austria);
Katarzyna Kudlaty (AVL List GmbH, Austria); Stefan Noehammer (AVL List GmbH, Austria); Michael Wiesinger
(AVL List GmbH, Austria)
Preliminary Results in Vehicle Classification Via Tire Dimensions and Configuration
Thomas Behan (Ryerson University, Canada); Zaiyi Liao (Ryerson University, Canada); Lian Zhao (Ryerson
University, Canada)
Inductive Power Transfer for Autonomous Sensors in Presence of Metallic Structures
Joan Albesa (Universitat Politècnica de Catalunya, Spain); Manel Gasulla (Universitat Politècnica de Catalunya,
Spain)
Voltage Regulation on Inductive Power Links for Autonomous Sensors
Joan Albesa (Universitat Politècnica de Catalunya, Spain); Manel Gasulla (Universitat Politècnica de Catalunya,
Spain)
Fast and Accurate Battery Model applicable for EV and HEV Simulation
Bernhard Schweighofer (Graz University of Technology, Austria); Hannes Wegleiter (Graz University of
Technology, Austria); Manes Recheis (Graz University of Technology, Austria); Paul Fulmek (Vienna University
of Technology, Austria)
Instrumentation and Control of a High Power BLDC Motor for Small Vehicle Applications
Alexander Rowe (Massey University, New Zealand); Gourab Sen Gupta (Massey University, New Zealand);
Serge Demidenko (RMIT International University Vietnam & Saigon South campus, Vietnam)