Technical Program

Patient Standing Stability Measurements using Pressure Sensitive Floor Sensors
Matthew Taylor (Carleton University, Canada); Rafik Goubran (Carleton University, Canada); Frank Knoefel
(Bruyere Continuing Care, Canada)
A Duty-Cycle Controlled Variable-Gain Instrumentation Amplifier Applied For Two-electrode ECG Measurement
Roddy Romero (Federal University of Santa Catarina, Brazil); Gabriel Da Silva (Federal University of Santa
Catarina, Brazil); Fernando Rangel (Federal University of Santa Catarina, Brazil)
Practical Design of Low-cost Instrumentation For Industrial Electrical Impedance Tomography (EIT)
Mohammad Khalighi (Sharif University of Technology - International Campus - Kish Island, Iran); Bijan
Vosoughi Vahdat (Sharif University of Technology & Bisipl Laboratory : Biological Signal Processing Lab, Iran);
Mohammad Mortazavi (Sharif University of Technology, Iran); H Wei (University of Bath, United Kingdom);
Soleimani Manuchehr (University of Bath, United Kingdom)
Wearable Object Detection System for the Blind
Alessandro Dionisi (University of Brescia, Italy); Emilio Sardini (University of Brescia, Italy); Mauro Serpelloni
(University of Brescia, Italy)
Estimation of the orthosis-limb contact pressure through thermal imaging
Marco Tarabini (Politecnico di Milano, Italy); Bortolino Saggin (Politecnico di Milano, Italy); Diego Scaccabarozzi
(Politecnico di Milano, Italy); Gerardo Lanfranchi (Fitech Italia, Italy)
Kinect Skeletal Tracking based Virtual Rehabilitation Exergames
Mohamad Hoda (University of Ottawa, Canada); Abu Saleh Md. Mahfujur Rahman (University of Ottawa,
Canada); Ali Karime (University of Ottawa, Canada); Abdulmotaleb El Saddik (University of Ottawa, Canada)
Modeling of Signals and Systems
Room: KMS
Poster
Study of the maximal interpolation errors of the local polynomial method for frequency response function
measurements
Johan Schoukens (Vrije Universiteit Brussel, Belgium); Gerd Vandersteen (Vrije Universiteit Brussel, Belgium);
Rik Pintelon (Vrije Universiteit Brussel, Belgium); Yves Rolain (Vrije Universiteit Brussel, Belgium)
Parallel Wiener identification starting from linearized models
Maarten Schoukens (Vrije Universiteit Brussel, Belgium); Yves Rolain (Vrije Universiteit Brussel, Belgium)
An Approach to Model-Aware Measurements
Vincenzo Di Lecce (Politecnico di Bari, Italy); Marco Calabrese (Polytechnic of Bari, Italy)
Efficient Design of Capacitive Sensors Using Conformal Maps
Norbert Eidenberger (Johannes Kepler University of Linz, Austria); Severin Wiesmueller (Johannes Kepler
University Linz, Austria); Bernhard G. Zagar (University of Linz, Austria)
Online Measuring Method Using an Evolving Model Based Test Design for Optimal Process Stimulation and
Modelling
Markus Stadlbauer (Vienna University of Technology & AVL List GmbH, Austria); Maxime Deregnaucourt
(Vienna University of Technology, Austria); Christoph Hametner (Vienna University of Technology, Austria);
Stefan Jakubek (Vienna University of Technology, Austria); Thomas Winsel (AVL List GmbH, Austria)
An Automated Calibration Method for the Local Positioning System LOSNUS
Mohammad Syafrudin (TU Wien & Electronics Engineering Polytechnic Institute of Surabaya, Austria); Herbert
Schweinzer (Vienna University of Technology, Austria); Christian Walter (TU Wien, Austria)
Multivariate Grey Model Based BEMD for Hyperspectral Classification
Zhi He (Harbin Institute of Technology, P.R. China); Jing Jin (Harbin institute of Technology, P.R. China); Qiang
Wang (Harbin Institute of Technology, P.R. China); Shen Yi (Harbin Institute of Technology, P.R. China); Yan
Wang (Harbin Institute of Technology, P.R. China)