Magic2 Voice GB Manual - Fax-Anleitung.de

4 Turn small roll forward to tension the ink film. Make sure
that the ink film is not creased.
5 Close the machine by swinging the operation panel forward,
until it snaps in.
6 Insert the yellow sheet with the printed side upwards and
press START/COPY.
A silver strip is fixed to the start of the ink film, so the
quality of the first few pages may be impaired.
The yellow sheet identifies the inserted ink film and
protects you from using ink films of other brands which
may lead to your fax machine not functioning correctly.
Loading paper
Before you can copy documents, paper must be loaded in your
fax machine. Please use only the following paper format:
standard A4, 210 x 297 mm. The fax machine works with
normal paper used for writing and copying and has been
optimised for smooth 80g/m 2 papier. The smoother the paper
surface the better the print quality. If there is no paper in the fax
machine the red display lamp flashes and on the display
appears:
OUT OF PAPER
10
1 Insert the paper tray in the slots provided behind the paper
feed mechanism.
2 Stick the paper support insertion in the openings provided
on the paper feed flap.
3 To prevent several sheets being drawn into the machine at
once, first fan out the paper to separate the sheets and then
straighten the stack on a flat surface before inserting it into
the paper feed.
4 Pull the paper feed flap fully forward until it stops. Insert
several sheets of A4 paper (80 g) up to the end-stop in the
paper feed mechanism (max. 50 sheets).