PermitPackage - Vernon High School.pdf - Florida Solar Energy ...

250A-160VDC in-line DC Fuse.
Fuse - West Marine Model# 215089
Fuse Block - West Marine Model# 10093813
FlexWare Mounting Plate
2 rows of 8 Batteries in series.
Batteries are Sun Xtender 3050T Batteries.
(See Sheet DS-03:04 for Battery Specifications).
12.75"
10.25"
250A Inline DC Fuse
Ground Anchor
and Strap
To positive DC Busbar in
FlexMax 1000 Power
Distribution Panel
#2/0 To Negative DC
Terminals Of
Inverters
# 4/0 From Battery
Negative
Conduit Tie Down bracket
Wood Subfloor
#4/0 battery cable
Must be equal length 4/0 Battery Cables
Battery Temperature Sensor Wire to one Charge Controller
#4/0 battery cable
Must be equal length
4/0 Pos Battery
Cable
Battery Temp
Sensor Wire
Skids
Sun-Xtender
PVX-3050T
6V AGM Battery
Concrete Block
Sun-Xtender
PVX-3050T
6V AGM Battery
#2/0 To Positive DC
Terminals Of
Inverters
175 ADC
# 4/0 From Battery
Positive
DC Busbar Detail in FlexMax 1000 Power Distribution Panel
2" Flexible Metal
Conduit
Plastic Bushing
4/0 Neg Battery
Cable
96.00"
Battery Bank to DC Enclosure connection Detail
Battery Wiring Detail
SCALE: NTS
2" Flexible Metal
Conduit Connector
Sun-Xtender
PVX-3050T
6V AGM Battery
Battery Temperature
Sensor
29"
Sun-Xtender
PVX-3050T
6V AGM Battery
Sun-Xtender
PVX-3050T
6V AGM Battery
Sun-Xtender
PVX-3050T
6V AGM Battery
Battery Connection Detail
Batteries are Concorde SunExtender PVX-3050T
6V, 354Ah @ C/100 Battery bank supplies 27.0KWh @ 80% DOD
Wiring Method:
Battery System Wiring. Connect eight
batteries in series to create a 48V array.
Connect two groups in parallel. The
batteries will deliver 27.0 kWh. Use only
UL listed cables and lugs and UL listed
crimp tools. Use 4/0 cables for battery to
battery connections.
Use only UL listed cables and lugs and UL
listed crimp tool. Do not use fine stranded
wire under the set screws inside the
Outback Inverter.
Sun-Xtender
PVX-3050T
6V AGM Battery
Notes:
Sun-Xtender
PVX-3050T
6V AGM Battery
To negative DC Busbar in
FlexMax 1000 Power
Distribution Panel
1. Batteries are Sun-Xtender PVX-3050T; 6
volt batteries. Total battery capacity:
27.0KWh @ (C/100) and 80% DOD.
2. Positive and Negative battery cable
length between batteries and busbar
must be equal.
3. Use heat shrink on all crimp lugs
4. Disconnects for batteries are located on
the FlexWare 1000 DC Power Distibution
Panel.
5. Install all batteries in accordance to NEC.
6. Install Batteries in a well ventilated area
to keep them as cool as possible.
7. Fuse Information
Fuse Rating: 250A@160VDC
Manufacturer: Blue Sea Systems
Manufacturer part #: 5118
West Marine part #: 215089
Fuse Block
Model #: 10093813
Manufacturer part #: 5502
3232 Moss Hill Road, Vernon, FL 32462
Design for:
I CERTIFY THAT THIS PV
SYSTEM FULLY COMPLIES
WITH THE REQUIREMENTS
OF NEC 690.
PV SYSTEM
Total Output:
# Modules:
Manufacturer:
Model:
Vernon High School
Solar School Shelters
Battery Backup PV System
Battery Wiring Detail
SCALE: NTS
DRAWN BY: RB,HB
CHECKED BY: EC
DATE: 10/03/11
SHEET 8 OF 20
Revision:
00
10.08 kW
42
Solar World
240
Sheet:
E.E. Castillo, PE
Licensed Engineer #: PE52590
Certification of Authorization #28406
3601 N. DIXIE HWY, BAY 16 BOCA RATON, FL 33431
PHONE: 561.750.8677 FAX:561.750.0518
E-04