Audio 2000 Hands-Free car Kit Bluetooth Adapter - Funkwerk ...

More documents

Recommendations

Info

Switching on and off and Ignition sense -10- Bluetooth Adapter Continue reading in the „Pairing a new device“ section when putting into operation for the first time. Continue reading in the „Pairing a known device“ section during normal operation. Switching on and off and Ignition sense With the ignition switched on the adapter is fully functional. After switching off the ignition, the Bluetooth adapter is switched off as long as no active conversation is underway. If a conversation is underway when the ignition is switched off, it is not switched off/decoupled until the conversation is ended. After switching on the ignition, the system is automatically started by pressing the "Accept" button or automatically after max. 40 seconds and begins searching for the telephone that was last paired. Pairing a device A telephone can be found and paired automatically or via the device search. When the ignition of the vehicle is switched on, an automatic attempt is carried out to pair the telephone that was last used. If the device from the user profile that was last paired is not found or if the user profile that was last paired was reset in the meantime (see „Deleting a user“ section), the menu skips to the Change user menu. In the event of a successful device search, the phones in the receiver's range are displayed. Pairing a new device After a device search, the name of the required telephone can be entered using the Scroll forwards (4) and Scroll back (3) buttons. The randomly-generated pairing PIN is shown in the display by pressing the Accept button (1). After successfully entering the pairing PIN in the telephone, the pairing process begins between the telephone and the Bluetooth adapter. Depending on the type of telephone used, further operating steps may be required for the telephone. After a successful pairing process, the device is ready for operation and shows the inactive screen. Pairing a known device If a telephone was already paired with the Bluetooth adapter and the telephone is saved as a user, it is shown in the Change user menu. The telephone is paired by pressing the Accept (1) button. It is not necessary to repeat the PIN entry. During the pairing, the message „Seeking mobile phone“ appears on the display of the Bluetooth adapter. After the successful pairing process, the device is ready for operation and shows the inactive screen.
Bluetooth Adapter -11- Making calls Deleting pairing of a device If the BT connection is disconnected, e.g. through removal from the vehicle or switching off the telephone, after a few seconds the message „No BT connection“ appears on the display of the Bluetooth adapter and the Bluetooth adapter subsequently changes to the Change user menu. A new connection can be established by switching the ignition of the vehicle off and on or by pressing the Accept button (1). Also see „Changing user“ section. Please continue reading in the „User options“ section under Login/Logout for a manual disconnection. Making calls The Bluetooth adapter offers the possibility of placing a call using the phone book or the call register that is loaded at every pairing. The call registers are loaded first. Loading the phonebook may take more time depending on the size of the phonebook. Placing a call from the phone book When the Bluetooth adapter shows the inactive screen, the phone book entries can be displayed by pressing the Scroll forwards (4) or Scroll back (3) buttons. Alternatively, you can change to the phone book via the main menu by pressing the Options button (5). Pressing the Accept button shows the numbers stored under the names. Pressing the Accept button again establishes a call to the displayed number. Placing a call from the call register Depending on the telephone, up to three call registers are available: the list of the dialled numbers, the list of the received calls and the list of the missed calls. The lists can be reached via the main menu. The list of dialled numbers can also be reached from the inactive screen by pressing the Accept button (1). Pressing the Accept button shows the numbers stored under the names. Pressing the Accept button again establishes a call to the displayed number. The list of the dialled numbers is only loaded from the telephone after being paired. The list is supplemented if a call is made via the Bluetooth adapter. The list is not updated if the number is selected on the telephone. Incoming calls Incoming calls are acoustically signalled in the vehicle and optically signalled in the display of the Bluetooth adapter. Depending on the phone, the ringtone of the phone or a generated ringtone is emitted through the vehicle speakers. The num-
Page 1 and 2: Audio 2000 Hands-Free car Kit Funkw
Page 3 and 4: Bluetooth Adapter Table of Contents
Page 5 and 6: Bluetooth Adapter -5- Introduction
Page 7 and 8: Bluetooth Adapter Completing the ha
Page 9: Bluetooth Adapter -9- Putting into
Page 13 and 14: Bluetooth Adapter -13- Settings Cal
Page 15 and 16: Bluetooth Adapter -15- Settings For
Page 17 and 18: Bluetooth Adapter -17- Troubleshoot
Page 19 and 20: Bluetooth Adapter -19- Declaration

Audio 2000 Hands-Free car Kit Bluetooth Adapter - Funkwerk ...

Create successful ePaper yourself

Delete template?

Save as template?